SUNDOO SDB-20 Torque Testers (Model SDB-20) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. SUNDOO SDB-20 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: SUNDOO | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | SDB-20 |
|---|---|
| Brand | SUNDOO(Temperature SUNDOO Instrument with Limit , WENZHOU SUNDOO INSTRUMENTS CO., LTD) |
| Category | Dial Type Torque Wrench |
| Range | 2~20 N·m |
| Graduation | 0.2 N·m |
| Rotation | 9.5×9.5 mm |
| Angle Sleeve Dimensions | 6~13 mm |
| Maximum | 83.5 N |
| Overall length | 320 mm |
| Weight | 0.5 kg |
| Accuracy | ≤±5% |
| Origin | in Temperature |
| Calibration Basis | JJG 707-2014《 Torque Wrench Verification Gauge Range 》 |
| Supply Notes | Guangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
SUNDOO (SUNDOO Instrument Ltd., WENZHOU SUNDOOINSTREMS CO., Wenzhou, Inc., WENZHOU . X . X Z XZ UNDOO SUNDOO SDB-20 board wrench, a table twitch in the SDB series, X X- he scale 0.2~100 N·m, direct reading. Double-guide dashboards, peak-pointing points, reading without batteries, workshop endurance. Reference: LTD
The following table shows the key parameters of all SDB models in the SDB series, which allows for targeting torque. Reference: 7
| Model | Range | Graduation | Turn the line | Hexagonoscope size | Maximum impact% | Overall Length | Weight |
|---|---|---|---|---|---|---|---|
| SDB-1.5 | 0.2~1.5 N·m | 0.02 N·m | 6.6×6.3 mm | 5~12 mm | 10.5 N | 235 mm | 0.4 kg |
| SDB-3 | 0.3~3 N·m | 0.05 N·m | 6.6×6.3 mm | 5~12 mm | 21.5 N | 235 mm | 0.4 kg |
| SDB-6 | 0.6~6 N·m | 0.1 N·m | 6.6×6.3 mm | 5~12 mm | 43 N | 235 mm | 0.4 kg |
| SDB-10 | 1~10 N·m | 0.1 N·m | 6.6×6.3 mm | 5~12 mm | 86 N | 235 mm | 0.4 kg |
| SDB-20 | 2~20 N·m | 0.2 N·m | 9.5×9.5 mm | 6~13 mm | 83.5 N | 320 mm | 0.5 kg |
| SDB-50 | 5~50 N·m | 0.5 N·m | 9.5×9.5 mm | 6~13 mm | 178 N | 360 mm | 0.6 kg |
| SDB-100 | 20~100 N·m | 1 N·m | 9.5×9.5 mm | 6~13 mm | 286 N | 430 mm | 0.7 kg |
Electronics - a screw-stretch torque, a connector-twig torque, a shell-loading torque-trucking pseudo-trucking and review; hardware machines - bolt-string torque, cosmosis factor, spin-axis output torque;;-Tracting torque; torque-tight torque; torque-trench, comb torose-string;- (a) Automobile accessories - engine and bottom bolts are twisted to the tow, wheels, screws, oil pipes are tied to the tow; medical devices - syringe twirling, instrument assembly and torque, packaging is turned on the torque; — Print packaging - caps open and lock tight, hose caps sprain, canning caps twist, home appliances - screw torque, machine output torque, knob torque; scientific research and teaching - torque sensors,_ The driveback is turned hard, the thread is tied to the tight curve analysis.!
SDB-20, with a process of 2~20 N·m, is recommended to the target torque between 10% ~ 100% of the process, without overloading the damaged sensor, A series of effective precision bands. When a lot of bolts are fitted to the torque, the array is preset or alarm-guided; only periodical and non-conventional equipment is performed, and the instrument is set up to be used for eye clips;_ To analyse the stinting process or friction coefficient, a test machine capable of recording the torque and the corner at the same time is required
Q: What is the magnitude and fraction value of SDB-20?
A: The process for SDB-20 is 2~20 N·m with a fraction value 0.2 N·m. This series is 5 per cent
Q: What are the other steps in this series?!
A: SDB series of 7 models ranging from 0.2~1.5 N·m to 20~100 N·m, 1.5~2 multi-selection to the target; for full comparison see the " Series One " table on this page
Q: What brand is SUNDOO (SUNDOO)?!
A: SUNDOO is the brand of SUNDOO Instrument Co. Ltd. in Wenzhou, founded by 1998, specialized in mechanics and torque measuring instruments, The product line covers the digital torque test, wrinkle wrench, twister, org, and the torque.Screen Strangler wrench gauges and various torque test machines. Reference: ISO9001, 2015, CE
Q: Do you need calibration for the torque test?
A: It is recommended that you be calibrated once a year, or after frequent use, shock, and maintenance. can arrange for a check-up and produce a calibration certificate, and the wrench and torque lift are checked by JJG 707-2014, which is the "Word wrench" protocol. The torque tester and tester are checked according to the JJG 797-2013 torque test instrument control protocol..Stret testerStight test protocol
Q: N.m., kgf.cm., lbf.in.!?
A: 1 N·m = 10.197 kgf cm = 8.851 lbf in. The digital camera type of SUNDOO generally supports a switch of three units, The table and preset indicate the unit typographical typologies used to order the goods
Q: What is the size of the wrench and the wobble?
A: Selected by interface with the set or batch: 1/4 (6.35 mm) for small torque, 3/8 (9.5 mm) for 20~100 N·m, 1/2 (12.7 mm) for 100~300 N·m, 3/4'(19 mm) and above are heavily reinforced for 500 N·m and above
Q: How do you choose the process?!
A: A multiple 1.5~2 to the point, with a safe surplus and a better time period. The effective measure of the torque instrument is usually 10 per cent ~ 100 per FS (partially tested 1 per cent ~ 100 per FS or 2%~100% FS) The lower limit does not guarantee a default error
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.