SUNDOO LX-AM Hardness Testers (Model LX-AM) is a Hardness Testers supplied by Guangzhou Yunke Electronics Co., Ltd. SUNDOO LX-AM Hardness Testers — Hardness Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: SUNDOO | Category: Hardness Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | LX-AM |
|---|---|
| Brand | SUNDOO(Temperature SUNDOO Instrument with Limit , WENZHOU SUNDOO INSTRUMENTS CO., LTD) |
| Category | Hardness Testers |
| Product Type | Pointer Type |
| Hardness Scale | AM Type (HAM) |
| Featured Measuring Range | 20~90 HAM |
| Scale Disk Value | 0~100 HAM |
| Indenter Stroke | 0~1.25 mm |
| Indenter Terminal Part Pressure | F=324+4.4HAM (mN) |
| Indenter Head Dimensions | SR0.1 mm |
| Measuring Error | ±2 HAM |
| Dimensions | 115×60×25 mm |
| Weight | 0.15 kg |
| Applicable Standard | GB / T 531.1-2008《 Rubber or Thermal Property Rubber Pressure Hardness Test Method No. 1 Part Division: Hardness Testers( Hardness)》 |
| Origin | in Temperature |
| Calibration | Guangzhou Yunke Electronics Co., Ltd. can Check and Output Tool Calibration Certificate |
| Supply Notes | Guangzhou Yunke Electronics Co., Ltd. Item For , |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
SUNDOO (SUNDOO Instrument Ltd., WENZHOU SUNDOOINSTREMS CO., Wenzhou, Inc., WENZHOU . X . X Z XZ UNDOO SUNDOO LX-AM SOLID HUNDRY, AM single-fingered HSL )SUNDOO 1 NNZ XN he recommended range of measurements 20~90 HAM. The AM presses are only 1.25 mm, designed for the design of the prototypes. Normal A-type film is read in error because it is over-pressed. Reference: LTD
Rubber products - tests of sulfination consistency with hardness for seals, tubes, glues, tremors; plastic products - engineering plastics, casings, hardscales of plates compared to the feed; foam cotton and sponges - low hard sponges, EVA, soft and hardness evaluation of tampons (AO); thin film and thin film - surface hardness of thin sample products (AM short-trip presses); Wire cables - hardness tests of insulation and protective gear; fruit and agriculture - maturity and storage judgement of fruit such as apples, pears, strawberrys, grapes; scientific research and quality inspection - hardness data collection, batch consistency analysis,. Third-party testing of sampling.!
LX-AM single-fingered stunometer AM, recommended range 20~90 HAM, The AM presses process is only 1.25 mm, designed for thinners, and the normal A-type film is read out of range because it is overstretched. The selection is based on a ruler and then a process: HA for soft rubber, HD for hard rubber and hard plastic, HAO for sponge foam cotton and HAM for thin film. The ruler selection error is much more important than the instrument's lack of accuracy; the sample should be of less thickness than 6 mm and should be superimposed to the same thickness, otherwise readings would be higher
Q: What is the range of measurements and reading methods for LX-AM?
A: LX-AM is a single-guide-skinnium AM hardmeter with recommended ranges 20~90 HAM. Recommended range of measurements 20~90 HAM
Q: How do you choose this type?
A: LX-AM of 1 models, as is the case for the sample of the measured material; for complete parameters, see the table on this page, " Model One Overview"
Q: What brand is SUNDOO (SUNDOO)?!
A: SUNDOO is the brand of SUNDOO Instrument Co. Ltd. in Wenzhou, founded in 1998, specialized in mechanics and hard gauges. The hard meter product line covers the hard scale of the dung-pod, the hard scale of the number-celebrium, the hard scale of the number-celebrium, the hard scale of the tungsten, the hardness of the tungsten-coated product..Screaks of the product.Scope-cracker.Scope of the product. Specially designed test racks and hard-forming fruit.!. Reference: ISO9001, 2015, CE
Q: Do you need calibration for the HDR?
A: It is recommended that you be calibrated once a year, or frequently used, and that you fall behind. the station can arrange for a check and issue a calibration certificate.The standard hard block is used for verification during the day-to-day period, and the reading deviations are sent when the maximum permitted error is exceeded
Q: How do the scales of HA, HD, HAO, HAM be distinguished? Q: Q: Q: Q, Q, Q, , X
Specifications: 1.25 mm HA HD HAO AO HAM AM. Please contact our engineers for the full technical wording.
Q: What about the pointer and the digital display?
A: Pointer-type without batteries, oil-resistant, long-term stability, suitable for workshop site and inspection; higher digital resolution (0.2), with USB output, data can be imported directly into a computer to make batch statements, Fit for quality and feed tests.!
Q: Do you need test racks?
A: The weight of the pressure during handheld measurements is entirely by hand sense, and the same sample may be measured by different people in several units. the load is fixed and the load is equal to the rate of the load behind the fixed-test frame, with a marked improvement in repeatability; when comparing data with the external presentation or batch, the data is not available. It is recommended that the racks be matched with the hardometers.!
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.