SUNDOO LD-A Hardness Testers (Model LD-A) is a Hardness Testers supplied by Guangzhou Yunke Electronics Co., Ltd. SUNDOO LD-A Hardness Testers — Hardness Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: SUNDOO | Category: Hardness Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | LD-A |
|---|---|
| Brand | SUNDOO(Temperature SUNDOO Instrument with Limit , WENZHOU SUNDOO INSTRUMENTS CO., LTD) |
| Category | Digital Hardness Testers |
| Product Type | Digital Type |
| Graduation | 0.2 HA |
| Hardness Scale | A Type (HA) |
| Measuring Range | 0~100 HA |
| Measuring Error | 20~90 Range internal Error ≤±1 |
| Operating Temperature | 20±10 ℃ |
| Temperature | -27 ℃~+70 ℃ |
| Relative Humidity | 15%~80% RH |
| Data output | USB Interface Output |
| Display | Digital Type, Measurement Device and Data Processing at a Body |
| Power Supply | 500 mAh can Battery, most Length Charging 1.5 hours |
| Operating Time | Fully charged Continuous Operating Approx. 40 hours |
| Dimensions | L170×W60.5×H44.5 mm |
| Weight | 0.4 kg |
| Applicable Standard | GB / T 531.1-2008《 Rubber or Thermal Property Rubber Pressure Hardness Test Method No. 1 Part Division: Hardness Testers( Hardness)》 |
| Origin | in Temperature |
| Calibration | Guangzhou Yunke Electronics Co., Ltd. can Check and Output Tool Calibration Certificate |
| Supply Notes | Guangzhou Yunke Electronics Co., Ltd. Item For , |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
SUNDOO (SUNDOO Instrument Ltd., WENZHOU SUNDOOINSTREMS CO., Wenzhou, Inc., WENZHOU . X . X Z XZ UNDOO SUNDOO LD-A number CZD, CZACystems,Cymmetric X-Z XZSZS, XZ XZ XZSZ The measure range 0~100 HA, the separation of 0.2 HA. The most commonly used specification is the number of times with USB output,_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Data can be exported directly for reporting when you do batch tests. Reference: LTD
Rubber products - tests of sulfination consistency with hardness for seals, tubes, glues, tremors; plastic products - engineering plastics, casings, hardscales of plates compared to the feed; foam cotton and sponges - low hard sponges, EVA, soft and hardness evaluation of tampons (AO); thin film and thin film - surface hardness of thin sample products (AM short-trip presses); Wire cables - hardness tests of insulation and protective gear; fruit and agriculture - maturity and storage judgement of fruit such as apples, pears, strawberrys, grapes; scientific research and quality inspection - hardness data collection, batch consistency analysis,. Third-party testing of sampling.!
A-synchronous scale of LD-A, measured range 0~100 HA, resolution 0.2 HA, most commonly used specification number, , X-X-X-X-X-X-X-Q, X-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X Take USB for output, and the data can be exported directly for the batch test. The pattern is selected by setting the scale before the process: soft rubber with HA, hard rubber with hard plastic with HD, SpongeBob cotton for HAO and thin film for HAM. The ruler selection is much more important than the instrument's lack of precision; the sample is not thick enough to add the same to the same size. Otherwise, readings will be high.!. Reference: 6 mm
Q: What is the range of measurements and reading methods for LD-A?
A: LD-A number of aglython type A hardometers with a range 0~100 HA, resolution 0.2 HA. A, XZ, X., XV
Q: How do you choose this type?
A: LD-A of 1 models, as is the case for the sample of the measured material; for complete parameters, see the table on this page, " Model One Overview"
Q: What brand is SUNDOO (SUNDOO)?!
A: SUNDOO is the brand of SUNDOO Instrument Co. Ltd. in Wenzhou, founded in 1998, specialized in mechanics and hard gauges. The hard meter product line covers the hard scale of the dung-pod, the hard scale of the number-celebrium, the hard scale of the number-celebrium, the hard scale of the tungsten, the hardness of the tungsten-coated product..Screaks of the product.Scope-cracker.Scope of the product. Specially designed test racks and hard-forming fruit.!. Reference: ISO9001, 2015, CE
Q: Do you need calibration for the HDR?
A: It is recommended that you be calibrated once a year, or frequently used, and that you fall behind. the station can arrange for a check and issue a calibration certificate.The standard hard block is used for verification during the day-to-day period, and the reading deviations are sent when the maximum permitted error is exceeded
Q: How do the scales of HA, HD, HAO, HAM be distinguished? Q: Q: Q: Q, Q, Q, , X
Specifications: 1.25 mm HA HD HAO AO HAM AM. Please contact our engineers for the full technical wording.
Q: What about the pointer and the digital display?
A: Pointer-type without batteries, oil-resistant, long-term stability, suitable for workshop site and inspection; higher digital resolution (0.2), with USB output, data can be imported directly into a computer to make batch statements, Fit for quality and feed tests.!
Q: Do you need test racks?
A: The weight of the pressure during handheld measurements is entirely by hand sense, and the same sample may be measured by different people in several units. the load is fixed and the load is equal to the rate of the load behind the fixed-test frame, with a marked improvement in repeatability; when comparing data with the external presentation or batch, the data is not available. It is recommended that the racks be matched with the hardometers.!
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.