AMADA ML-6810C (1000 W) Fiber Laser Welder (Model ML-6810C(1000W)) is a AMADA Welding supplied by Guangzhou Yunke Electronics Co., Ltd. 1000 W fiber laser welder with improved focusing, about 20% lower power consumption and a 30% smaller footprint than previous models.
Brand: AMADA | Category: AMADA Welding
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | ML-6810C |
|---|---|
| Maximum Rated Output | 1000 W (output power) |
| Oscillation Wavelength | 1080±5nm |
| Pulse Repetition Count / Modulation Function | 1-1000 PPS / 1-5000 Hz (sine, triangle, rectangular) |
| Number of Conditions | 256 conditions |
| Input Power Supply | 3-phase AC180-240 V, 50/60 Hz |
| Power Consumption (Max / Standby) | 4.0 kW or less / 1 kW or less |
| Cooling Method | Water cooling (21-25°C) |
| Weight | 320 kg or less |
| Dimensions H x W x D (mm) | 1102.6*556*1072.2 |
AMADA (Japan) ML-6810C(1000W) is a fiber laser welding system that uses a fiber laser as the light source and performs precision spot and seam welding through a focused spot. It offers good beam quality, a small heat-affected zone and high electro-optical conversion efficiency, making it suitable for micro welding of stainless steel, carbon steel, aluminium and copper.
Improved light focusing through an optimised design, giving much higher focusing performance than previous models; 20% lower power consumption thanks to a new oscillator and an improved external chiller; space saving, with length, width and depth all reduced and total volume including the chiller about 30% smaller
Automotive parts, electrical components, motors, electronic components, semiconductors and ICs, batteries, medical devices and optical communications.
A typical configuration includes the laser (or laser engine), the output head or galvo scanner unit, the cooling system and a welding monitor. Selection starts from the spot size, material and penetration depth to determine spot diameter and power, then the worktable or automation method.
Q: Which materials can this laser welder handle?
A: It is suitable for precision spot and seam welding of stainless steel, carbon steel, aluminium and copper. For specific materials and weld requirements, send us samples and we will help confirm the process by trial welding.
Q: How do I choose between laser welding and resistance welding?
A: Laser welding has a small heat-affected zone and suits tiny welds and thin-walled parts; resistance welding suits stable, high-volume lap welding. The choice depends on material, weld size and cycle time.
Q: Do you provide selection and after-sales support?
A: Guangzhou Yunke Electronics Co., Ltd. provides selection consulting, spare parts and after-sales support. Call us or use the contact details on this page for a quotation.
Q: What site conditions are required for installation?
A: Confirm the power supply capacity, air supply (for pneumatic press models), floor space and fume extraction/protection. Refer to the manual of the specific model for details.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.