AMADA ML-C200A/300A YAG Laser Welder is a AMADA Welding supplied by Guangzhou Yunke Electronics Co., Ltd. YAG laser welder with industry-leading power density, the first high-power model in China able to use a φ0.2 mm fiber.
Brand: AMADA | Category: AMADA Welding
Sales Inquiries: 15626018696 · 78403603@qq.com

| ML-C300A | ML-C200A(30J) / ML-C200A(60J) |
|---|---|
| Standard Type | High-brightness type |
| Resonator | Maximum rated output / 300 W / 200 W |
| Output Energy Type | 30J TYPE (pulse width 5 ms) / 90J TYPE (pulse width 25.7 ms) / 30J TYPE1 (pulse width 6.6 ms) / 30J TYPE2 (pulse width 8.5 ms) / 60J TYPE1 (pulse width 17.1 ms) / 60J TYPE2 (pulse width 20 ms) |
| Maximum Peak Power | 6 kW (5 ms or less only) / 5 kW (5 ms or less only) / 4 kW (5 ms or less only) / 5 kW (5 ms or less only) / 4 kW (5 ms or less only) |
| Recommended Fiber | SI Φ 0.4 mm and above / Up to 150 W: SI Φ 0.2 mm and above; 150-200 W: SI Φ 0.3 mm and above / SI Φ 0.2 mm and above / Up to 150 W: SI Φ 0.2 mm and above; 150-200 W: SI Φ 0.3 mm and above / SI Φ 0.2 mm and above |
| Pulse Width | Standard: 0.3-100.0 ms (0.1 ms step); switchable by setting: 0.25-5.00 ms (0.05 ms step) |
| Pulse Repetition Rate | 1~500pps |
| Resonant Wavelength | 1.064μm |
| Output Stability | ±3%: when the output energy of 1 pulse is 5 J or more and the peak power is 1 kW or more |
| Power Supply | Power supply / 3-phase 4-wire AC380 V ±10%, 50 Hz |
| Beam Splitting | Beam splitting type / Up to 4-way splitting: 1) single, 2) simultaneous 2-way, 3) simultaneous 3-way, 4) simultaneous 4-way, 5) time-shared 2-way, 6) time-shared 3-way, 7) time-shared 4-way, 8) simultaneous 2-way plus time-shared 2-way |
| Chiller | Heat exchange method / Water-to-water |
| Laser Controller | Model / Touch panel (domestic) (Traditional/Simplified Chinese, English); remote control unit: MLE-118A-01, 3 m extension cable (optional); MLE-118A-01 (Simplified Chinese); remote control: 3 m extension cable (optional) |
| Functions | Laser output waveform values, laser energy for upper/lower limit judgement, and the combination at left allow 32 setting patterns; output pulses per second, repeat count, laser energy (J), average power (W); total output count display (9 digits); display of outputs judged good (9 digits) |
| Operating Environment | Ambient temperature and humidity / 5-35°C, 85% or less |
| Other | Mass / Approx. 320 kg |
| Dimensions | 117 3 ( H ) x 5 60 ( W ) x 1310 ( D ) m m |
AMADA (Japan) ML-C200A/300A (domestic) is a YAG laser welder that uses an Nd:YAG solid-state laser with stable pulse output for ultra-precision spot welding and high-speed seam welding, commonly used for precision welding of electronic components, motors and batteries.
Industry-leading power density; the first high-power laser welder in China able to use a φ0.2 mm fiber, achieving high power density (ML-C200A); excellent stability, with real-time closed-loop energy feedback ensuring weld consistency.
Automotive parts, electrical components, motors, electronic components, semiconductors and ICs, batteries, medical devices and optical communications.
A typical configuration includes the laser (or laser engine), the output head or galvo scanner unit, the cooling system and a welding monitor. Selection starts from the spot size, material and penetration depth to determine spot diameter and power, then the worktable or automation method.
Q: Which materials can this laser welder handle?
A: It is suitable for precision spot and seam welding of stainless steel, carbon steel, aluminium and copper. For specific materials and weld requirements, send us samples and we will help confirm the process by trial welding.
Q: How do I choose between laser welding and resistance welding?
A: Laser welding has a small heat-affected zone and suits tiny welds and thin-walled parts; resistance welding suits stable, high-volume lap welding. The choice depends on material, weld size and cycle time.
Q: Do you provide selection and after-sales support?
A: Guangzhou Yunke Electronics Co., Ltd. provides selection consulting, spare parts and after-sales support. Call us or use the contact details on this page for a quotation.
Q: What site conditions are required for installation?
A: Confirm the power supply capacity, air supply (for pneumatic press models), floor space and fume extraction/protection. Refer to the manual of the specific model for details.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.