AMADA MAWA-050A/300B Micro-TIG Welder (Model MAWA-050A/300B) is a AMADA Welding supplied by Guangzhou Yunke Electronics Co., Ltd. Micro-TIG welder for high-melting-point and dissimilar metals, with non-contact arc welding and pulse modulation to limit heat input.
Brand: AMADA | Category: AMADA Welding
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | MAWA-050A / MAWA-300B |
|---|---|
| Supply Voltage | Single-phase AC200V-AC230V ±10% (50/60 Hz) / 3-phase AC200V ±10% (50/60 Hz) |
| Maximum Output Current | 50A / 300A |
| Load Voltage | 12 V (at 50 A) / 22 V (at 300 A) |
AMADA (Japan) MAWA-050A/300B is a micro-TIG welder that performs low-current precision welding in micro-arc TIG mode, with low heat input and a stable arc; it suits joining small parts and thin-walled components.
Welds high-melting-point metals and dissimilar metals; being an arc process it allows non-contact welding; a pulse modulation function suppresses heat effects.
Automotive parts, electrical components, motors, electronic components, semiconductors and ICs, batteries, medical devices and optical communications.
A typical configuration includes the welding power supply, welding transformer (AC type), welding head and monitor. Selection is based on the weld material, thickness and cycle time to determine current, pressurisation method and monitoring items.
Q: How do I determine the required welding power?
A: It is determined by the weld material, thickness and cycle time. The specification table for each model lists the maximum welding current or output power for an initial selection, which we then help confirm against your process.
Q: How do the power supply, welding head and monitor work together?
A: The power supply delivers the current waveform, the welding head applies pressure, and the monitor measures and judges the result; the three are selected together according to interface and range.
Q: Do you provide selection and after-sales support?
A: Guangzhou Yunke Electronics Co., Ltd. provides selection consulting, spare parts and after-sales support. Enquiries are welcome.
Q: What site conditions are required for installation?
A: Confirm the power supply capacity, air supply (for pneumatic press models), floor space and fume extraction/protection. Refer to the manual of the specific model for details.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.