TOHNICHI STC50CN3-G-BT Digital Torque Screwdriver (Model STC50CN3-G-BT) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI STC50CN3-G-BT digital torque screwdriver, 5–50 cN·m, torque and angle monitoring, 1,000-record memory, USB Type-C serial output, Bluetooth 5.1.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | STC50CN3-G-BT |
|---|---|
| Category | Digital Torque Screwdriver |
| Brand | TOHNICHI Control TOHNICHI |
| Torque measuring range (cN·m) | 5~50 |
| Resolution (cN·m) | 0.02 |
| Torque measuring range (kgf·cm) | 0.5~5 |
| Resolution (kgf·cm) | 0.002 |
| Torque measuring range (lbf·in) | 0.44~4.4 |
| Resolution (lbf·in) | 0.002 |
| Torque accuracy | 5~10 cN·m:±2%;10~50 cN·m:±1% |
| Angle measuring range | 0~999° |
| Angle resolution | 1° |
| Angle accuracy | ±2° +1 digit (when rotated 90° at 30–180°/s) |
| Measurement mode | Fastening mode / Inspection mode |
| Data memory | 1,000 records (torque, angle and pass/fail result) |
| Pass/fail judgement | Buzzer and LED indication when upper/lower limits are set |
| Other functions | two times Detection / Auto Store and Reset / Auto Power-off |
| Power Supply | Ni-MH battery (dedicated BP-8 battery pack) |
| Data output | Serial output via USB Type-C connector / Bluetooth (Bluetooth only on Bluetooth models) |
| Continuous operating time | Approx. 50 hours (Bluetooth model) |
| Charging time | Approx. 4.5 hours |
| Operating temperature | 0–40°C (no condensation) |
| Bluetooth version | 5.1 |
| Protocol profile | GATT private protocol / HOGP (HID over GATT Profile) |
| Wireless output power | 8 dBm |
| Communication distance | Approx. 10 m (varies with radio conditions and the connected device) |
| Overall length | Approx. 225 mm |
| Weight | Approx. 229 g |
| Standard accessories | Battery pack BP-8 |
| Bit interface | 6.35 HEX (accepts standard commercially available bits) |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The TOHNICHI STC50CN3-G-BT is a digital torque screwdriver in the STC3-G series from Tohnichi Mfg. Co., Ltd., with a range of 5–50 cN·m. It monitors torque and angle simultaneously to detect abnormalities such as double tightening, making it suitable for fastening and inspection of small screws. Built-in Bluetooth 5.1 (GATT private protocol / HOGP) allows direct linking with Excel® and management systems, making it well suited to fastening and inspection stations that require record keeping and data aggregation.
The body features a high-contrast organic EL (OLED) display and a 360° LED ring, so pass/fail status can be read instantly. The grip is offered in two diameters matched to torque capacity, reducing fatigue during long handheld operation.
The STC3-G series comes in three ranges: STC50CN3-G (5–50 cN·m), STC200CN3-G (20–200 cN·m) and STC500CN3-G (50–500 cN·m); each range is available as a standard model or a Bluetooth model (suffix -BT). When selecting, keep the working torque near the middle of the range to preserve accuracy while leaving headroom.
The bit interface is 6.35 HEX, so standard commercially available bits can be used directly. Power comes from the dedicated BP-8 Ni-MH battery pack; charging takes about 4.5 hours, with about 60 hours of continuous use for the standard model and about 50 hours for the Bluetooth model. The official specification table lists weight by range (approx. 229 g) without a separate value for the Bluetooth model; the actual shipped value prevails.
When ordering, please specify [TOHNICHI] [model], for example: TOHNICHI STC50CN3-G-BT.
Q: How do I choose among the three ranges?
A: Choose by the upper limit of your working torque: 5–50 cN·m for STC50CN3-G, 20–200 cN·m for STC200CN3-G and 50–500 cN·m for STC500CN3-G; keep the working torque near the middle of the range.
Q: What is the difference between the Bluetooth model and the standard model?
A: The Bluetooth model adds Bluetooth 5.1 (GATT private protocol / HOGP) and can link directly with Excel® and management systems; continuous use drops from about 60 hours to about 50 hours, while measurement performance is otherwise identical.
Q: How many data can be stored?!?
A: 1,000 records, including torque, angle and pass/fail results.
Q: Are the bit and battery proprietary?
A: The bit interface is standard 6.35 HEX, so commercially available standard bits can be used; the battery is the dedicated BP-8 pack.
Reference values from the original datasheet: 3, 50.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.