Home › Products

Product Overview

TOHNICHI STC200CN3-G Digital Torque Screwdriver (Model STC200CN3-G) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI STC200CN3-G digital torque screwdriver, 20–200 cN·m, torque and angle monitoring, 1,000-record memory, USB Type-C serial output.

Brand: TOHNICHI | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

TOHNICHI STC200CN3-G Digital Torque Screwdriver

Technical Specifications

ModelSTC200CN3-G
CategoryDigital Torque Screwdriver
BrandTOHNICHI Control TOHNICHI
Torque measuring range (cN·m)20~200
Resolution (cN·m)0.1
Torque measuring range (kgf·cm)2~20
Resolution (kgf·cm)0.01
Torque measuring range (lbf·in)2~17
Resolution (lbf·in)0.01
Torque accuracy20~40 cN·m:±2%;40~200 cN·m:±1%
Angle measuring range0~999°
Angle resolution1°
Angle accuracy±2° +1 digit (when rotated 90° at 30–180°/s)
Measurement modeFastening mode / Inspection mode
Data memory1,000 records (torque, angle and pass/fail result)
Pass/fail judgementBuzzer and LED indication when upper/lower limits are set
Other functionstwo times Detection / Auto Store and Reset / Auto Power-off
Power SupplyNi-MH battery (dedicated BP-8 battery pack)
Data outputSerial output via USB Type-C connector
Continuous operating timeApprox. 60 hours (standard model)
Charging timeApprox. 4.5 hours
Operating temperature0–40°C (no condensation)
Overall lengthApprox. 225 mm
WeightApprox. 233 g
Standard accessoriesBattery pack BP-8
Bit interface6.35 HEX (accepts standard commercially available bits)

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

The TOHNICHI STC200CN3-G is a digital torque screwdriver in the STC3-G series from Tohnichi Mfg. Co., Ltd., with a range of 20–200 cN·m. It monitors torque and angle simultaneously to detect abnormalities such as double tightening, making it suitable for fastening and inspection of small screws. Data is output through the USB Type-C serial port; for wireless connection to Excel® or a management system, choose the -BT Bluetooth model with the same range.

The body features a high-contrast organic EL (OLED) display and a 360° LED ring, so pass/fail status can be read instantly. The grip is offered in two diameters matched to torque capacity, reducing fatigue during long handheld operation.

Key Advantages

  1. Simultaneous torque and angle monitoring reliably detects abnormalities such as double tightening.
  2. The OLED display and 360° LED ring make the pass/fail judgement visible at a glance, supported by a buzzer.
  3. A 1,000-record memory stores torque, angle and pass/fail results for traceability.
  4. Fastening mode and inspection mode can be switched, so one unit covers both assembly and sampling inspection.
  5. Supports double-tightening detection, auto memory and reset, and auto power-off.
  6. Data output through the USB Type-C serial port

Application Scope

Options and Configuration Description

The STC3-G series comes in three ranges: STC50CN3-G (5–50 cN·m), STC200CN3-G (20–200 cN·m) and STC500CN3-G (50–500 cN·m); each range is available as a standard model or a Bluetooth model (suffix -BT). When selecting, keep the working torque near the middle of the range to preserve accuracy while leaving headroom.

The bit interface is 6.35 HEX, so standard commercially available bits can be used directly. Power comes from the dedicated BP-8 Ni-MH battery pack; charging takes about 4.5 hours, with about 60 hours of continuous use for the standard model and about 50 hours for the Bluetooth model. The official specification table lists weight by range (approx. 233 g) without a separate value for the Bluetooth model; the actual shipped value prevails.

When ordering, please specify [TOHNICHI] [model], for example: TOHNICHI STC200CN3-G.

FAQ

Q: How do I choose among the three ranges?
A: Choose by the upper limit of your working torque: 5–50 cN·m for STC50CN3-G, 20–200 cN·m for STC200CN3-G and 50–500 cN·m for STC500CN3-G; keep the working torque near the middle of the range.

Q: What is the difference between the Bluetooth model and the standard model?
A: The Bluetooth model adds Bluetooth 5.1 (GATT private protocol / HOGP) and can link directly with Excel® and management systems; continuous use drops from about 60 hours to about 50 hours, while measurement performance is otherwise identical.

Q: How many data can be stored?!?
A: 1,000 records, including torque, angle and pass/fail results.

Q: Are the bit and battery proprietary?
A: The bit interface is standard 6.35 HEX, so commercially available standard bits can be used; the battery is the dedicated BP-8 pack.

Reference values from the original datasheet: 3, 200.

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver

STC500CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC500CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G Digital Torque Screwdriver

STC500CN3-G
└ TOHNICHI (Japan)
TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver

STC200CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC50CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC50CN3-G-BT Digital Torque Screwdriver

STC50CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC50CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC50CN3-G Digital Torque Screwdriver

STC50CN3-G
└ TOHNICHI (Japan)
TOHNICHI CEM850N3X32D-G Torque Testers
Torque Testers

TOHNICHI CEM850N3X32D-G Torque Testers

CEM850N3X32D-G
└ TOHNICHI (Japan)