NIDEC-SHIMPO FGPX-2 Force Gauges (Model FGPX-2) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO FGPX-2 Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: NIDEC-SHIMPO | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | FGPX-2(FGPX Series total 11 levels: FGPX-0.2 ~ FGPX-100, FGPX-250H, FGPX-500H) |
|---|---|
| Rated Capacity (R.C.) | ±20.00N(±2.000kg) |
| Display Resolution | 0.01N / 0.001kg |
| Measuring Method | Force, Pressure Dual toward Measuring Force; General Normal Meter Measure, Correction Peak Meter Measure, Peak Meter Measure three Type Mode |
| Accuracy | ±0.2% R.C. ±1/2 digit(23℃) |
| Sampling Rate | 1000 times / s; Display Period 1, 2, 3, 5, 10, 20 times / s switchable |
| Display and Judgment | 4 digits LCD(digits Height 12mm, supports Position Display)+ Hi_NG / OK / Lo_NG three Judgment LED |
| Measuring Unit | N, kg(g) a Key Switching |
| Overload Quantity | 200% R.C., Over when Display Screen Display OVR |
| Data Storage | Continuous Memory 1000 groups / Single times Memory 100 groups / Standard Memory 50 groups, built-in Statistical Functions (Maximum, Minimum, Peak, Average, Standard Deviation) |
| Communication Interface | USB(standard Data Cable, with TORIEMON USB Software); RS-232C(optional Wire FGTC-6006); can Connection Mitutoyo Digimatic Printing Unit DP-1VR |
| Analog Output | ±1V(to ± Display Range), Accuracy ±50mV, 12bit D / A Rotation Replace, Output more New 1000 times / s, Load Resistance 10kΩ or more |
| External Signal | Output: Overload PUSH / PULL, Comparison Device HI / OK / LO Open Circuit Electric Extreme (Maximum DC30V / 5mA); Input: ZERO, HOLD, PEAK |
| Power Supply Method | AC Adapter (DC9V / 200mA) or built-in NiMH Battery, can Edge Charging Edge Measurement; Full Rear Continuous operation Approx. 10 hours, Charging most Length 17 hours |
| Body Dimensions | Width 75mm × Thickness 38mm × Length 147mm |
| Total Weight | Approx. 450g |
| Standard accessories | Meter Measure Adapter 6 Type, Stand, AC Adapter, Portable Case, USB Data Cable |
| Operating Environment | 0~40℃, 35~85% RH, non-condensing |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Quantified capacity (R.C.) | Show Discreet%1%2%2%2 | Overload durability%%%2 |
|---|---|---|---|
| FGPX-0.2 | ±2.000N (±200.0g) | 0.001N / 0.1g | 200% R.C. |
| FGPX-0.5 | ±5.000N (±500.0g) | 0.001N / 0.1g | 200% R.C. |
| FGPX-1 | ±10.00N (±1000g) | 0.01N / 1g | 200% R.C. |
| FGPX-2 | ±20.00N (±2.000kg) | 0.01N / 0.001kg | 200% R.C. |
| FGPX-5 | ±50.00N (±5.000kg) | 0.01N / 0.001kg | 200% R.C. |
| FGPX-10 | ±100.0N (±10.00kg) | 0.1N / 0.01kg | 200% R.C. |
| FGPX-20 | ±200.0N (±20.00kg) | 0.1N / 0.01kg | 200% R.C. |
| FGPX-50 | ±500.0N (±50.00kg) | 0.1N / 0.01kg | 200% R.C. |
| FGPX-100 | ±1000N (±100.0kg) | 1N / 0.1kg | 200% R.C. |
| FGPX-250H | ±2500N (±250.0kg) | 1N / 0.1kg | 150% R.C. |
| FGPX-500H | ±5000N (±500.0kg) | 1N / 0.1kg | 150% R.C. |
Note: The above-mentioned resolution, excess tolerance and shape are based on the official list of NIDEC, FGPX-0.ZQ8/0.5, the pilot of the 141mm, and the owner of the aircraft, 141mm,, as well as the other party, the official list of the new treasures., is based on the following:, the size of the vehicle, is the size of the vehicle, and the FGPX-1 50 Captain 147mm, FGPX-100 Captain 149mm, GPX-250H / 500H is a high-cost heavy machine (82×57 x 214mm, overloadable 150% R.C.). Reference: 2. Reference values: 0.2.
What are the differences between the Q1: FGPX-2 and FGP series and how should they be chosen?
A: FGPX is a machine-type for enhanced data management and communication based on the FGP series, with a core of force consistency (0.2%R.C., 1000 times/sec sample).Stamp Z Stamp FGPX Additional provision of Z_SG/ OK/ Lo_NG Ruling LED, USB and RS-232C communications, X-X-X- X- X- X-ZX-X-X-X-ZX-X-X-X-X-X-X- A Mitutoyogpiaki interface and external ZERO/ HOLD/ PEAK signal input._ A single reading selection of FGP is sufficient; data records, decision output or connection to the upper machine / PLC are required and FGPX-2 is more appropriate
Q2: What is the appropriate measure for 20.00N (2.000kg)?. Reference: FGPX-2
A: Typical test projects include end pressure strength, switches action, package seal stripping, zipping and magic stick-up forces, etc. are recommended to keep the conventional test power in the 30%ZQ1% in the range of the process. Accuracy is ensured while a peak surplus is left; if a destructive test close to the full mass is required to be measured frequently, it is recommended that the stubble be selected.?. Reference: 80
Q3: Is the excess of FGPX-2 damaged?
A: FGPX-2 with a excess load tolerance of 200%R.C. The overload screen shows a warning warning for OVR. But the sensor is sensitive to instant shocks,_ Long-term or repeated excess use still causes zero drift or even damage, so avoid shock loads and reserve the amount of the excess of the mass of 20%30%
Q4: How do you import data from FGPX-2?
A: Two channels: 1 USB - labeled USB data lines, installed official TORIEMON USB software to import data directly to, The maximum 100 per second is collected continuously; 2 RS-232C - additional FGTC-6006 dots are required to be used in conjunction with TORIEMON-S software. The data stored on the machine can also be returned to the computer once and for all.!
Q5: How long can the battery of FGPX-2 be used in a continuous period?
A: A built-in nickel hydrogen charger cell measuring approximately 10 hours continuously after filling; maximum 17 hours after charging, automatically stopping after filling, supporting side charge side measurements. 10 does not turn off the automatic for minutes (continuous use of the insulation for the AC adapter) and this feature can also be set to close
Q6: What attachments do the FGPX-2 labels contain?
A: Host, 6 type of meter adapter (Cyclops 70°, Mountain 70°, V ditch 70°, plane 12mm, hook, The test racks, special kits, and special folders are to be purchased separately. Reference: 92mm, AC, USB
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.