Home › Products

Product Overview

SHIMPO DTMB-0.2C Tension Meters (Model DTMB-0.2C) is a Tension Meters supplied by Guangzhou Yunke Electronics Co., Ltd. SHIMPO DTMB-0.2C Tension Meters — Tension Meters · Yunke Electronics. Request a quotation and datasheet.

Brand: SHIMPO | Category: Tension Meters

Sales Inquiries: 15626018696 · 78403603@qq.com

SHIMPO DTMB-0.2C Tension Meters

Technical Specifications

ModelDTMB-0.2C
Range0.0~200cN(Rated 196.1cN/200.0gf)
Accuracy±1% F.S.(DTMB-0.2C, 0.5C is ±1%, its is ±1.5%)
Display4 digits LCD , digits Height 11.5mm; Unit cN
Response Time0.5s / 1s / 2s / 4s levels Adjustable
Measuring Wire Upper Limit1000 m / min, can at Wire Detection, No requires Unit
Reading MemoryReal-time Value, Maximum, Minimum, Peak (4 groups)⚠DTMB not can Quantity Memory (DTMX with 100 groups)
Body MaterialElectric Aluminium Housing,
Dimensions76(W) × 48(D) × 257(L) mm
Total WeightApprox. 650g
Power Supply4 cells AA Alkaline Battery (Continuous Approx. 20 hours); optional with AC AC Adapter
Operating Environment0~45℃, Relative Humidity ≤90%, non-condensing
Data output❌ DTMB No Signal Output; requires Acquisition DTMX
Standard AccessoriesMain unit, Guide toward groups, Portable Instrument Case, Manual

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

ModelRated capacityEffective measurement of rangeSuggested line diameter%
DTMB-0.2C196.1cN(200.0gf)0.0~200.0cNCylinder wires 0.08mm below; copper wire 0.15mm below; fibre-optic 1000D below

ModelRated capacityEffective measurement of rangeSuggested line diameter%
DTMB-0.2C196.1cN(200.0gf)0.0~200.0cNCylinder wires 0.08mm below; copper wire 0.15mm below; fibre-optic 1000D below
DTMB-0.5C490.3cN(500.0gf)4.0~500.0cNCylinder 0.01; copper wire 0.05 0.25mm 0.25mm. Reference: 0.15mm
DTMB-1C981cN(1000gf)100~1000cNCylinder 0.05; copper wire 0.1 0.4mm 0.4mm. Reference: 0.25mm
DTMB-2C1961cN(2000gf)200~2000cNCylinder 0.15; copper wire 0.3 0.6mm 0.6mm. Reference: 0.4mm
DTMB-2.5C2452cN(2500gf)250~2500cNCylinder 0.15; copper wire 0.3 0.6mm 0.6mm. Reference: 0.4mm
DTMB-5C4903cN(5000gf)500~5000cNCylinder 0.3; copper wire 0.4 1.0mm 1.0mm. Reference: 0.7mm
DTMB-10C9.81daN(10.00kgf)1.00~10.00daNCylinder 0.4; copper wire 0.7 1.2mm 1.2mm. Reference: 0.8mm
DTMB-20C19.61daN(20.00kgf)2.00~20.00daNCrude wire; special calibration of customer sample lines

III. Core strengths

  1. The following small-scale specialization of 200cN, which detects the fact that the yarn, single fibre, gold wire don't "stamp to the bottom" is better resolution and repetition
  2. Handheld handheld, which can be measured dynamically during the operation of a roller, a cylinder, without the need to stop sampling
  3. The built-in 5 type of line (bar, wire, copper + 2 group custom sample line) is preset, and the line is changed by a key switch
  4. Peak/minimum lock, capture tension-variant polar values during silk
  5. Anti-static aluminium alloy casings, suitable for precision electronics such as fibre-optics, fine paint wraps and copper wires.A-B-B-B-B-B
  6. Wheels are simple to unassemble and can be quickly replaced when the liner specifications are changed

IV. Applicable industries

Pressure detection of fine wires such as textile fibres, gold wires, paint-packed copper wires, fibre-optic cables, carbon fibres, film coatings, chords, electronic components, etc

V. OPTIONAL . Reference: FAQ

Q: DTMB-0. 2C and DTMX-0.2C. Reference values: 0.2.
A: The measure is exactly the same as the accuracy. DTMB-0.2C is the economic typeNo output, local reading onlywith high value value; DTMX-0.ZQ3 for high performance, with RS-232C and 0 — 1V for analogue, with computer, PLC, XX The 100 group measurements are stored and suitable for lined data retrospectively.SS. Reference: 2. Reference values: 0.2.

Q: How many lines can you measure?
A: Standard calibration lines are fibre-optic lines 1000D or below the yarn of 0.15mm, below the wire of 0.08mm, below the copper line 0.15mm; 0.15mm; Super-lines can also send samples for special calibration.!

Q: Can you measure the film, the flatband? Q: Can
A: No, this series can only measure the diameter of the radial material.??

Q: What if we need to take PLC for online control? Q
A: The same mass programme DTMX-0.2C, which simulates output and RS-232C direct docking control system

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

SHIMPO DTMX-20C Tension Meters
Tension Meters

SHIMPO DTMX-20C Tension Meters

DTMX-20C
└ SHIMPO
SHIMPO DTMX-10C Tension Meters
Tension Meters

SHIMPO DTMX-10C Tension Meters

DTMX-10C
└ SHIMPO
SHIMPO DTMX-5C Tension Meters
Tension Meters

SHIMPO DTMX-5C Tension Meters

DTMX-5C
└ SHIMPO
SHIMPO DTMX-2.5C Tension Meters
Tension Meters

SHIMPO DTMX-2.5C Tension Meters

DTMX-2.5C
└ SHIMPO
SHIMPO DTMX-2C Tension Meters
Tension Meters

SHIMPO DTMX-2C Tension Meters

DTMX-2C
└ SHIMPO
SHIMPO DTMX-1C Tension Meters
Tension Meters

SHIMPO DTMX-1C Tension Meters

DTMX-1C
└ SHIMPO