SHIMPO DTMX-0.2C Tension Meters (Model DTMX-0.2C) is a Tension Meters supplied by Guangzhou Yunke Electronics Co., Ltd. SHIMPO DTMX-0.2C Tension Meters — Tension Meters · Yunke Electronics. Request a quotation and datasheet.
Brand: SHIMPO | Category: Tension Meters
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DTMX-0.2C |
|---|---|
| Range | 0.0~200.0cN(Rated 196.1cN(200.0gf)) |
| Accuracy | ±1% R.C.(Meter Measure Wire when) |
| Display | 4 digits LCD , digits Height 11.5mm |
| Response Time | 0.5s / 1s / 2s / 4s levels Adjustable |
| Measuring Wire Upper Limit | 1000 m / min, can at Wire Detection, No requires Unit |
| Reading Memory | This unit 100 groups Measurement Data + Maximum / Minimum / Peak / Average / Standard Deviation Statistics |
| Data output | ✅ Analog 0~1VDC + RS-232C/Mitutoyo Digital Output (DTMB No Output) |
| Body Material | Pressure Aluminium Housing, Electric, |
| Dimensions | 76(W) × 48(D) × 257(L) mm |
| Total Weight | Approx. 650g |
| Power Supply | 4 cells AA Alkaline Battery (Approx. 20 hours); can with AC AC Adapter |
| Operating Environment | 0~45℃, Relative Humidity ≤90%, non-condensing |
| Standard Accessories | Main unit, Guide toward groups, AA Alkaline Battery, Portable Instrument Case, Manual |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Rated capacity | Effective measurement of range | Accuracy | Suggested line diameter% |
|---|---|---|---|---|
| DTMX-0.2C | 196.1cN(200.0gf) | 0.0~200.0cN | ±1% R.C. | Cylinder wires 0.08mm below; copper wire 0.15mm below; fibre-optic 1000D below |
| DTMX-0.5C | 490.3cN(500.0gf) | 4.0~500.0cN | ±1% R.C. | Cylinder 0.01; copper wire 0.05 0.25mm 0.25mm. Reference: 0.15mm |
| DTMX-1C | 981cN(1000gf) | 100~1000cN | ±1.5% R.C. | Cylinder 0.05; copper wire 0.1 0.4mm 0.4mm. Reference: 0.25mm |
| DTMX-2C | 1961cN(2000gf) | 200~2000cN | ±1.5% R.C. | Cylinder 0.15; copper wire 0.3 0.6mm 0.6mm. Reference: 0.4mm |
| DTMX-2.5C | 2452cN(2500gf) | 250~2500cN | ±1.5% R.C. | Cylinder 0.15; copper wire 0.3 0.6mm 0.6mm. Reference: 0.4mm |
| DTMX-5C | 4903cN(5000gf) | 500~5000cN | ±1.5% R.C. | Cylinder 0.3; copper wire 0.4 1.0mm 1.0mm. Reference: 0.7mm |
| DTMX-10C | 9.81daN(10.00kgf) | 1.00~10.00daN | ±1.5% R.C. | Cylinder 0.4; copper wire 0.7 1.2mm 1.2mm. Reference: 0.8mm |
| DTMX-20C | 19.61daN(20.00kgf) | 2.00~20.00daN | ±1.5% R.C. | Crude wire; special calibration of customer sample lines |
Online tension detection and data tracking of running line items such as fibre-optic cables, paint-packed copper wires, textile fibres, carbon fibres, molten silk, metal wires, film/ tape curling, chords, batteries and polar wires are traced. —
Q: What about the same model of the DTMX-0.2C and DTMB?
A: The measure is the same as accuracy. DTMB has no output, only local readings, low prices; DTMX with RS-232C/ numerical output and simulation output, memory 100 group data, Computer/PLC or DTMX must be selected when data are to be traced.Spun:Spun.St
Q: Can a DTMX simulation output directly enter PLC?Spwx1
A: It is possible to export 0 — 1 VDC , with load resistance 2k more than once, with direct access to PLC analogue Input or Chart Recorder
Q: How thick are the lines?
A: DTMX-0. 2C standard applicable line material is wire 0.08mm; copper line ZQ2; fibre 1000D. 1000D. Strate Z Z St. St. St.St.s. The lined wheels are too rough and too fine to slip, and it is recommended that the specially designed wheeled components be selected or that larger slots be changed beyond the scope. Reference: 0.15mm. Reference values: 0.2.
Q: Can you measure the film, the flatband? Q: Can
A: No, this series can only measure the diameter of the radial material.??
Q: How long can the battery last?!?
A: Section 4 AA Alkaline Battery has been used continuously for approximately 20 hours; long-term online use of the recommended AC adapter. X Qu XX
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.