SHIMPO DTMX-0.5C Tension Meters (Model DTMX-0.5C) is a Tension Meters supplied by Guangzhou Yunke Electronics Co., Ltd. SHIMPO DTMX-0.5C Tension Meters — Tension Meters · Yunke Electronics. Request a quotation and datasheet.
Brand: SHIMPO | Category: Tension Meters
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DTMX-0.5C |
|---|---|
| Range | 4.0~500.0cN(Rated 490.3cN(500.0gf)) |
| Accuracy | ±1% R.C.(Meter Measure Wire when) |
| Display | 4 digits LCD , digits Height 11.5mm |
| Response Time | 0.5s / 1s / 2s / 4s levels Adjustable |
| Measuring Wire Upper Limit | 1000 m / min, can at Wire Detection, No requires Unit |
| Reading Memory | This unit 100 groups Measurement Data + Maximum / Minimum / Peak / Average / Standard Deviation Statistics |
| Data output | ✅ Analog 0~1VDC + RS-232C/Mitutoyo Digital Output (DTMB No Output) |
| Body Material | Pressure Aluminium Housing, Electric, |
| Dimensions | 76(W) × 48(D) × 257(L) mm |
| Total Weight | Approx. 650g |
| Power Supply | 4 cells AA Alkaline Battery (Approx. 20 hours); can with AC AC Adapter |
| Operating Environment | 0~45℃, Relative Humidity ≤90%, non-condensing |
| Standard Accessories | Main unit, Guide toward groups, AA Alkaline Battery, Portable Instrument Case, Manual |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
| Model | Rated capacity | Effective measurement of range | Accuracy | Suggested line diameter% |
|---|---|---|---|---|
| DTMX-0.2C | 196.1cN(200.0gf) | 0.0~200.0cN | ±1% R.C. | Cylinder wires 0.08mm below; copper wire 0.15mm below; fibre-optic 1000D below |
| DTMX-0.5C | 490.3cN(500.0gf) | 4.0~500.0cN | ±1% R.C. | Cylinder 0.01; copper wire 0.05 0.25mm 0.25mm. Reference: 0.15mm |
| DTMX-1C | 981cN(1000gf) | 100~1000cN | ±1.5% R.C. | Cylinder 0.05; copper wire 0.1 0.4mm 0.4mm. Reference: 0.25mm |
| DTMX-2C | 1961cN(2000gf) | 200~2000cN | ±1.5% R.C. | Cylinder 0.15; copper wire 0.3 0.6mm 0.6mm. Reference: 0.4mm |
| DTMX-2.5C | 2452cN(2500gf) | 250~2500cN | ±1.5% R.C. | Cylinder 0.15; copper wire 0.3 0.6mm 0.6mm. Reference: 0.4mm |
| DTMX-5C | 4903cN(5000gf) | 500~5000cN | ±1.5% R.C. | Cylinder 0.3; copper wire 0.4 1.0mm 1.0mm. Reference: 0.7mm |
| DTMX-10C | 9.81daN(10.00kgf) | 1.00~10.00daN | ±1.5% R.C. | Cylinder 0.4; copper wire 0.7 1.2mm 1.2mm. Reference: 0.8mm |
| DTMX-20C | 19.61daN(20.00kgf) | 2.00~20.00daN | ±1.5% R.C. | Crude wire; special calibration of customer sample lines |
Online tension detection and data tracking of running line items such as fibre-optic cables, paint-packed copper wires, textile fibres, carbon fibres, molten silk, metal wires, film/ tape curling, chords, batteries and polar wires are traced. —
Q: What about the same model of the DTMX-0.5C and DTMB?
A: The measure is the same as accuracy. DTMB has no output, only local readings, low prices; DTMX with RS-232C/ numerical output and simulation output, memory 100 group data, Computer/PLC or DTMX must be selected when data are to be traced.Spun:Spun.St
Q: Can a DTMX simulation output directly enter PLC?Spwx1
A: It is possible to export 0 — 1 VDC , with load resistance 2k more than once, with direct access to PLC analogue Input or Chart Recorder
Q: How thick are the lines?
A: DTMX-0. 5C standard application line material is wire 0.01 0.15mm; copper line 0.05 0.25mm. card wheels. 0.25mm. Standard application line material is 0.01 CZ C CZ Too fine and easy to skim, and beyond the scope, it is recommended that the specially designed wheeled components be selected or that larger slots be changed. Reference values: 0.5.
Q: Can you measure the film, the flatband? Q: Can
A: No, this series can only measure the diameter of the radial material.??
Q: How long can the battery last?!?
A: Section 4 AA Alkaline Battery has been used continuously for approximately 20 hours; long-term online use of the recommended AC adapter. X Qu XX
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.