NIDEC-SHIMPO DT-2100 Stroboscopes / Tachometers (Model DT-2100) is a Stroboscopes / Tachometers supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO DT-2100 Stroboscopes / Tachometers — Stroboscopes / Tachometers · Yunke Electronics. Request a quotation and datasheet.
Brand: NIDEC-SHIMPO | Category: Stroboscopes / Tachometers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | DT-2100 |
|---|---|
| Measuring Method | Laser Non- Contact + Contact two Use |
| Rotational Speed Range | Non- Contact 6 ~ 99,999 rpm/ Contact 0.8 ~ 25,000 rpm |
| Accuracy | ±0.006% of reading ±1 digit |
| Data Recording | Continuous 1000 groups / Single points 100 groups / Statistics 100 groups, USB Guide Output |
| Total Weight | Approx. 125 g |
| Model | Measuring Method | Quickity | Display | Power | Weight |
|---|---|---|---|---|---|
| DT-105A | Contact% | 0.10 ~ 25,000 rpm | 5 bit by StampsSt. Reference: 12 mm, LCD | 2 × AA | About 400 gScreaks |
| DT-107A | Contact% | 0.10 ~ 25,000 rpm | 5 bit by StampsSt. Reference: 10 mm, LED | 2 × AA | About 365 gScreaks |
| DT-205LR | Laser + Exposure Dual-Use | 6 ~ 99,999 rpm | 5 bit LCD | 2 × AA | About 365 gScreaks |
| DT-207LR | Laser + Exposure Dual-Use | 6 ~ 99,999 rpm | 5 bit LEDSpunners | 2 × AA | About 365 gScreaks |
| DT-2100 | Laser + dual-use contact (with records) | Non-contact 6 — 99, 999 rpm/Contact 0.8 — 25, 000 rpm | Blue Graphics OLEDSplit by | 2 x AA or USBSpunSpSpunnerSpuntionS | About 125 gScreaks |
| PH-100A | Contact% | 1.0 ~ 25,000 rpm | 5 bit by StampsSt. Reference: 12 mm, LCD | 3 × AA | About 170 gScreaks |
| PH-200L | Laser non-contact | 6.0 ~ 99,999 rpm | 5 bit by StampsSt. Reference: 12 mm, LCD | 3 × AA | About 160 gScreaks |
| PH-200LC | Exposure + non-contact dual-use laser | Contact 6.0 — 25,000/ Non-contact 6.0 — 99, 999 rpm | 5 bit by StampsSt. Reference: 12 mm, LCD | 3 × AA | About 160 gScreaks |
Q1: What is the biggest difference between DT-2100 and other speedsheets?
A1: Capable of recording and exporting data. Continuous measurements can be used to transfer to a computer memory from USB to 100 groups, single points and statistical groups. Other models can only read in situ and look back for short periods.!. Reference: 1000
Q2: What format is the exported data? Do you need a load drive??Accuse the engine?
A2: Links to computer export via USB line, the operation and supporting software should be based on random instructions; if you need to access a system, confirm whether the export format meets the requirements
Q3: What is the distance from the laser measurements?
A3: approximately 5 ~ 400 cm (2 in) ~ 13.1 in foot, belonging to the mid-distance proximity, Less than DT-205LR/207 LR, but covering the conventional machine measurements is fully adequate. Reference: 6 m
Q4: What are the lowest possible exposure patterns?
A4: Exposure mode 0.8 rpm, lower than the laser mode 6 rpm, suitable for slow-speed rotation axes and low-speed blending equipment
Q5: What does that mean if the screen is turned?!?
A5: OLED shows that content can be turned over as a whole 180°, and readings are still positive when held upside down or placed on the support
Q6: Can you keep the USB in place? Q
A6: Yes, support USB power supply. Fixed-level measurements recommend USB, which allows for both battery replacement and ready data export
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.