NIDEC-SHIMPO PH-100A Stroboscopes / Tachometers (Model PH-100A) is a Stroboscopes / Tachometers supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO PH-100A Stroboscopes / Tachometers — Stroboscopes / Tachometers · Yunke Electronics. Request a quotation and datasheet.
Brand: NIDEC-SHIMPO | Category: Stroboscopes / Tachometers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | PH-100A |
|---|---|
| Measuring Method | Contact Type |
| Rotational Speed Range | 1.0 ~ 25,000 rpm |
| Accuracy | ±1 rpm(1.0 ~ 599.9 rpm) |
| Display | 5 digits 12 mm LCD |
| Power Supply | 3 × AA 1.5 V, Approx. 50 hours |
Q1: PH-100A and PH-200L, PH-200LC
A1: PH-100A YesContact%1.0 — 25, 000 rpm, to hold the rotation axis; PH-200L YessLaser non-contact6.0 — 99, 999 rpm, to reflect; PH-200LC YesExposure + Laser Dual-Usethe most powerful. The measured is capable of stopping, meeting, and 100A; the high-speed, untouchable or space-spanned 200L; and the two scenarios are 200 LC
Q2: Should we have a reflective sticker? Qu
A2: No need. PH-100A is contact mode, measured by direct contact with the rotor, independent of the surface reflection conditions
Q3: Can you measure the speed and length of the line?
A3: Yes. The surface velocity (a variety of units, such as 0.1-3,809.8) and the cumulative length of the random 6 inches can be measured after loading. The total number of transfers can also be counted. Reference: m/min
Q4: How is the low-speed segment precision?
A4: 1.0 599.9 rpm with 1 rpm; 600 rpm above 0.006% of the 0.5 digit. 0.5 sScreaksS
Q5: How long can the battery last?
A5: Three Sections 5 battery is used continuously for approximately 50 hours, with a low-volume alert and 5 minutes automatic shutdown, and no power is used to run out
Q6: Is there a calibration certificate?
A6: Yes, randomly attached calibration certificates can be incorporated directly into the internal metering counter of the enterprise
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.