Home › Products

Product Overview

MOTIVE NK-500 Force Gauges (Model NK-500) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. MOTIVE NK-500 Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.

Brand: MOTIVE | Category: Force Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

MOTIVE NK-500 Force Gauges

Technical Specifications

ModelNK-500
SeriesNK
Sensor TypeMechanical Pointer Type (built-in Spring Unit , No requires Battery)
Maximum Test Range500N (50 kgf)
Minimum Scale2.5N (250 gf)
Stroke10 mm
etc. RangeApprox. 112.4 lbf
Accuracy±0.5% F.S
Main Unit DimensionsLength 223 × Width 60 × Height 51 mm
Power SupplyNo requires Battery

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

MOTIVE Taiwan MOTIVE QNK-500Condom thruster in the NK series with maximum test range 500N (51 kgf file corresponds to 500N (50 kgf Dz) X-X-X-X-X-Q (50 kgf-X-X-X-X-X-X-X-X-X-X-X-X-X-X-X- The minimum scale 2.5N (250 gf). NK is a mechanical meter for rapid field inspection and full production line inspection: no battery is needed, no power is activated, no power is used. High-resolution tic panel readings on the table 1/ 200 intuitively, the spin setting buttons can be switched between peak grab and instant-value testing, and a table with N and kgf double-tangs, Costs are far below numerically obvious and fit for a time of high staff capacity and limited budget and only reading.!?. Reference: MOTIVE


NK series of pointers thrusters List of specifications

ModelRangeDisplayed ValueResolutionEquivalent kgfEquivalent British_Equal British
NK-1010N10N (1 kgf)0.05N (5 gf)1.02 kgf2.248 lbf
NK-2020N20N (2 kgf)0.1N (10 gf)2.04 kgf4.496 lbf
NK-3030N30N (3 kgf)0.2N (20 gf)3.06 kgf6.744 lbf
NK-5050N50N (5 kgf)0.25N (25 gf)5.1 kgf11.24 lbf
NK-100100N100N (10 kgf)0.5N (50 gf)10.2 kgf22.48 lbf
NK-200200N200N (20 kgf)1N (100 gf)20.4 kgf44.96 lbf
NK-300300N300N (30 kgf)2N (200 gf)30.6 kgf67.44 lbf
NK-500500N500N (50 kgf)2.5N (250 gf)51 kgf112.4 lbf

II. Core advantages of productsCurrently

  1. Mechanical structure, no power supplyPure mechanical needles, without battery or power, can be measured and there is no battery ageing problem in long-term placement.?
  2. 1/200 High Resolution Sterling BoardThe tic sheet is based on a full-scale 1/200 fraction, is clear and understandable, and is consistent with the continuous reading of the needle, and the trend is judged to change the intuitive view of the number
  3. 0.5%F.S Precision0.5 per cent with full scale, meets the interpretation needs of the full and feed tests of the conventional production line
  4. N and kgf double teither N or kgf units can be read on the same pull pressure meter, one or two
  5. Peak / Intense SwitchRotate the button to capture peaks or read instant values, simple to operate
  6. The body is light223 x 60 x 51 mm with a single hand, with easy bearing and position
  7. Full specificationFrom 1 kgf to 50 kgf for a total of 8, with 3 for alternative sterilisation
  8. The hangar is more accurateinstalled on a manual or electric test platform, with a more stable test value and a higher degree of accuracy for rediscovery

III. Applicable industry and typical tests

IV. FAQ Questions and answers Question and answer Question

Q: How do you choose the measure?
A: The nearest range is selected by the measured value of 1.5 ~ 2. This model size 500N (approximately 51 kgf) Resolution 2.5N (250 gf), which recommends that the test force normally fall to the full mass of the 20% ~ 100%; If the measured force value is only below 10 per cent of the full range for a long time, it is recommended that a smaller level be changed to obtain a better and effective resolution

Q: Which is the choice for the pointer and the digital display??
A: The NK pointer is the most cost-effective option if reading, non-conducting data and budget or number of jobs are limited; higher resolution is required, data are stored/exported, and PLC is taken for automatic determination. The Z2/ Z2S/ MTF equivalent should be selected._ 0.5%F.S has a discrepancy between the accuracy of NK and the number-expressed 0.2%F.S. Please select the exact measure. F.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S

Q: What does the minimum scale mean by 5 gf?
A: refers to the strength (discrimination) of each small cell on the table. For example, NK-10, full range 10N (1 kgf), with a tic at 1/200 minutes,Screaks, 1/200,s, and the XX-X-rays,s, and the X-X-X-rays,s, The minimum scale is therefore 0.05N (approximately 5 gf). The reading is estimated by pointer position, and the actual effective resolution depends on the user’s reading habits..Screen

Q: What does the process mean by 10 mm? Q
A: means that the effective shift of the pole (sensor-resistor-end) is 10 mm. When you perform compression or stretching tests, the force shift should not exceed this range, otherwise it will reach mechanical limits and damage internal springs

Q: Do you need calibration for NK?
A: Yes. The mechanical meter will be used for a period of time to show a fatigue drifting spring, and it is recommended that the standard gauge or code matching be used for verification on a cycle (usually from half to one year) and that the deviation be recovered or adjusted in a timely manner

Q: How does precision be called? Can it be traced?!!?
A: 0.5 per cent (i.e. 0.5%F.S) with full scale, , ZX, Z200,, resolution, 1/200, randomly checked report of achievement,, ZX,, ZX, , Third party measurements are available for inspection in accordance with relevant protocols such as JJG; daily verification in the field can be performed using standard calculators or calibrated code matching.Scrells

Q: What should be the watchful side of daily usage?!?
A: 1 The force shall be directed at the sensor axis to avoid side-direction and bending; 2 Do not remain for long beyond 110 per cent and be discharged in time after warning; 3 Battery low voltage instructions appear and charged in a timely manner. Long-term absences should also be repeated at intervals;4 the environment is generally 0 ~ +40 °C, 20 ~ 80 % RH, avoiding condensation, Corrosionable gases and strong vibration environments;5 Regularly used standard gauges or coded verifications to maintain traceability.5

V. Qualified uses

  1. Short-scale measures and fractions of springs, springs, etc
  2. Switch key action measurement (phone, computer, remote control, film key)
  3. Connector, port insertion and pull test%
  4. End pull strength, silicon strength test%
  5. Cracking peaks for new materials such as glass, carbon, ceramics, plastics
  6. Built-plate, stick, wood, etc
  7. Strip test: duct tape, PCB, protective film, glued duct tape stripingA-Va-Va-Va-V
  8. Easily open cans, pull cans, and so on, to the peak when pulling
  9. The power line, the copper line, the pull-out test
  10. Switching TPN test: the touch power of the mechanical interface
  11. Stretch (extenssion) test of new materials such as rubber, film, etc
  12. Hardness test: density and hardness of tiles, fruits, lipstick, etc

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

MOTIVE Z2S-SW-20KN Force Gauges
Force Gauges

MOTIVE Z2S-SW-20KN Force Gauges

Z2S-SW-20KN
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-10KN Force Gauges
Force Gauges

MOTIVE Z2S-SW-10KN Force Gauges

Z2S-SW-10KN
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-5000N Force Gauges
Force Gauges

MOTIVE Z2S-SW-5000N Force Gauges

Z2S-SW-5000N
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-2000N Force Gauges
Force Gauges

MOTIVE Z2S-SW-2000N Force Gauges

Z2S-SW-2000N
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-1000N Force Gauges
Force Gauges

MOTIVE Z2S-SW-1000N Force Gauges

Z2S-SW-1000N
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-500N Force Gauges
Force Gauges

MOTIVE Z2S-SW-500N Force Gauges

Z2S-SW-500N
└ MOTIVE (Taiwan, China)