MOTIVE Z2H-5000N/ZPH-5000N Force Gauges (Model Z2H-5000N/ZPH-5000N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. MOTIVE Z2H-5000N/ZPH-5000N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.
Brand: MOTIVE | Category: Force Gauges
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | Z2H-5000N |
|---|---|
| Series | Z2H |
| Sensor Type | built-in Sensor a Body Type (Large Load Type) |
| Range | 5000N(Approx. 510 kgf) |
| Displayed Value | 5000N (500.0 kgf) |
| Resolution | 1N (0.1 kgf) |
| Accuracy | ±0.2% F.S ±1 digit。 |
| Main Unit Dimensions | Length 232.5 × Width 92 × Height 44.5 mm |
| Sampling Rate | 1000 times / s (MTM / MTA / MTF is 2 kHz) |
| Overload Capacity | 200% Full Range |
| Memory Functions | 1000 pcs Data Quantity Value |
| Data output | RS232C / USB / Analog -2~+2V / Comparison Signal |
MOTIVE Taiwan MOTIVE QZ2H-5000NA large-scale electronic thruster (with the same type of ZPH as in the series), process 5000N,Stamps, and a single-size-type, medium-sized, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high-speed, high- Resolution 1N (0.1 kgf). Z2H is an extension of the Z2 platform to the weight of the Hz: the body and sensor structure is strengthened by the process of 1000N ~ 5000N, and the system is not used for the purpose of the control of the aircraft. , ~ 5000N, 0.2%F.S accuracy, 1000 second sampling, 1000 group data storage, F.S, The colour LED qualification is a fully integrated PLC/ computer output interface suitable for testing for large force values such as metal pull, wire break, large key presses and structural strength. Reference: Z2H
| Model | Range | Displayed Value | Resolution | Equivalent kgf | Equivalent British_Equal British |
|---|---|---|---|---|---|
| Z2H-1000N | 1000N | 1000N (100.0 kgf) | 1N (0.1 kgf) | 102 kgf | 224.8 lbf |
| Z2H-2000N | 2000N | 2000N (200.0 kgf) | 1N (0.1 kgf) | 204 kgf | 449.6 lbf |
| Z2H-5000N | 5000N | 5000N (500.0 kgf) | 1N (0.1 kgf) | 510 kgf | 1.124 Klbf |
Q: How do you choose the measure?
A: The nearest range is selected by the measured value of 1.5 ~ 2. This model size 5000N (approximately 510 kgf) Resolution 1N (0.1 kgf), which recommends that the test force normally fall to the full mass of the 20% ~ 100%; If the measured force value is only below 10 per cent of the full range for a long time, it is recommended that a smaller level be changed to obtain a better and effective resolution
Q: What's the difference between Z2H and standard Z2?
A: Z2 standard type covers 2N ~ 1000N, Z2H dedicated to the heavy sections of 1000N ~ 5000N. . XS XSXX he mainframes are electronicly identical (0.2%F.S, 1000 times/ s, 1000 group storage). 11%F.S, 12 times/ s, 13 group storage)SSSS Difference in the tensile structure and size of the aircraft: Z2H for 232.5 x 92 x 44.5 mm, It is thicker than 220.5 x 78 x 32.3 mm for Z2 to withstand a greater force value._ Also, the ZPH model is identical to the Z2H specification and is named differently from the same series
Q: Can you still measure this size?!?
A: Small weights can be held hand-held, but the norm above 1000N isStaple the instrument on a manual or electric monitor, a material testeruse the clip to hold the sample, and the person is not subject to direct counter-activities. Z2H randomly armed with bolts is prepared for the platform
Q: What do you bring randomly?!??
A: 6 test attachments, handles, bolts, AC adapters, instructions, condoms, and USB wire and drive CD-ROMs., comparison function, Memory functions are standard configurations.!?
Q: Can you use the automation?Assem
A: Yes. Except for the RS232C/ USB digital interface, Also available -2 ~ +2 V Simulation of voltage output and +NG / OK / -NG open arctic comparison signal (MAX Z) XXC 10 mA) The automatic up and downs and the eligibility determination can be made directly from PLC, which is accompanied by the electrodynamic power station. Reference: 30 V
Q: How does precision be called? Can it be traced?!!?
A: 0.2% F.S ZQ1 digit. Randomly checked accomplishment books, which can be sent to relevant protocols such as JJG if they require third party measurement; 1 Daily verification in the field can be conducted using standard gauges or calibrated calibrated code matching
Q: What should be the watchful side of daily usage?!?
A: 1 The force shall be directed at the sensor axis to avoid side-direction and bending; 2 Do not remain for long beyond 110 per cent and be discharged in time after warning; 3 Battery low voltage instructions appear and charged in a timely manner. Long-term absences should also be repeated at intervals;4 the environment is generally 0 ~ +40 °C, 20 ~ 80 % RH, avoiding condensation, Corrosionable gases and strong vibration environments;5 Regularly used standard gauges or coded verifications to maintain traceability.5
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.