Home › Products

Product Overview

MOTIVE Z2S-SW-100N Force Gauges (Model Z2S-SW-100N) is a Force Gauges supplied by Guangzhou Yunke Electronics Co., Ltd. MOTIVE Z2S-SW-100N Force Gauges — Force Gauges · Yunke Electronics. Request a quotation and datasheet.

Brand: MOTIVE | Category: Force Gauges

Sales Inquiries: 15626018696 · 78403603@qq.com

MOTIVE Z2S-SW-100N Force Gauges

Technical Specifications

ModelZ2S-SW-100N
SeriesZ2S-SW
Sensor Typeexternal Standalone Sensor (Waterproof Dustproof Type)
Range100N(Approx. 10.2 kgf)
Displayed Value100.0N (10.00 kgf)
Resolution0.1N (0.01 kgf)
Accuracy±0.2%(MOTIVE Official to Z2S Series Nominal Accuracy).
Main Unit DimensionsLength 220.5 × Width 78 × Height 32.3 mm(Sensor Waterproof Dustproof)
Sampling Rate1000 times / s (MTM / MTA / MTF is 2 kHz)
Overload Capacity200% Full Range
Memory Functions1000 pcs Data Quantity Value
Data outputRS232C / USB / Analog -2~+2V / Comparison Signal

Product Description

MOTIVE Taiwan MOTIVE QZ2S-SW-100NA number of thrust-pulsors belonging to the Z2S-SW series of independent waterproof sensors with a range 100N, display value 100.0N (10.00 kgf) The resolution 0.1N (0.01 kgf). The sensors of Z2S-SW have waterproofing capabilities that can work long-term in a humid air, with coolant fluids and more dust. Automation control via RS232 interface with PLC. The process from 100N to 20 KN,. The sensor's tail is fitted with a thread interface for M6 ~ M16 in a quantum sequence to allow for direct penetration of the press, the platform and the work


Z2S-SW series of independent waterproof sensor push-pull metersScreen-Vamins-Valution-Treasure-Treasure-Treasure-T

ModelRangeDisplayed ValueResolutionEquivalent kgfEquivalent British_Equal British
Z2S-SW-100N100N100.0N (10.00 kgf)0.1N (0.01 kgf)10.2 kgf22.48 lbf
Z2S-SW-200N200N200.0N (20.00 kgf)0.1N (0.01 kgf)20.4 kgf44.96 lbf
Z2S-SW-500N500N500.0N (50.00 kgf)0.1N (0.01 kgf)51 kgf112.4 lbf
Z2S-SW-1000N1000N1000N (100.0 kgf)1N (0.1 kgf)102 kgf224.8 lbf
Z2S-SW-2000N2000N2000N (200.0 kgf)1N (0.1 kgf)204 kgf449.6 lbf
Z2S-SW-5000N5000N5000N (500.0 kgf)1N (0.1 kgf)510 kgf1.124 Klbf
Z2S-SW-10KN10KN10.00KN (1000 kgf)0.01KN (1 kgf)1020 kgf2.248 Klbf
Z2S-SW-20KN20KN20.00KN (2000 kgf)0.01KN (1 kgf)2039 kgf4.496 Klbf

Z2S-SW Sensor Scaling Specifications

Sensor typeCorresponding ProcessScalpel diameter
SW1-100N100NM6
SW1-200N200NM6
SW1-500N500NM8
SW1-1000N1000NM8
SW1-2000N2000NM10
SW1-5000N5000NM10
SW3-10KN10KNM16

II. Core advantages of productsCurrently

  1. Waterproof dust sensorCTPWThe official response of MOTIVE was "using a waterproof dust sensor" which can be used for long periods in the field environment in damp, spatter and dusty conditions
  2. Process overwrite to 20 KNScreaksFrom 100N to 20 KN in 8, the medium and low force values can be covered by large tonnage pressurized
  3. Scalorial interface standardizationThe sensor's tail is programmed to be attached to M6 / M8 / M10 / M16 threads, which can be directly interrupted into the press, the machine and the work, and installed in simple and reliable form. / M8 / M10 / M16 screws.SS
  4. RS232 direct company PLCConnect to automated equipment to PLC for automatic monitoring and qualification. Reference: RS232
  5. 0.2% High Precision.%%%2Continue the 0.2% accuracy level of the Z2 platform
  6. Independent sensor structure%The sensor is independent of the mainframe and can be installed at the point of measurement, and the host is located in a convenient position
  7. Three units to switch(K)N, Kgf (gf), Lbf (ozf) three units can be switched
  8. 1000 Group Data Storageinstrument to store the value of 1000 data

III. Applicable industry and typical tests

IV. FAQ Questions and answers Question and answer Question

Q: How do you choose the measure?
A: The nearest range is selected by the measured value of 1.5 ~ 2. This model size 100N (approximately 10.2 kgf) Resolution 0.1N (0.01 kgf), which recommends that the test force normally fall to the full mass of the 20% ~ 100%; If the measured force value is only below 10 per cent of the full range for a long time, it is recommended that a smaller level be changed to obtain a better and effective resolution

Q: Can you use it in a place where the air is more wet? Q
A: Yes. MOTIVE official reply is "A waterproofing sensor" and Z2S-SW is designed for the wet, cooling fluid, dusty environmentSensorWith protective capabilities, the mainframe itself should still avoid water and soaking

Q: How do you connect to the automation?!!?
A: The official response of MOTIVE is that "and the automated device is connected to RS232 via the RS232 interface ", which is sufficient to bind the sensor to the press or platform in conjunction with the sensor's thread interface._. Reference: PLC

Q: What should we do with the screwdriver?
A: Sensor screws increased with increased mass: 100N / 200N for M6, 500N / 1000N for M8, XI X-X-X-X-X-X-X-X-X-X-X-X-X-X-Z-Z-Z-Z-Z-Z-Z-Z-Z-Z-Z-Z 2000N / 5000N for M10 and 1011 for M16. It is sufficient to set aside the conch punctures in the selected slot for the design of the assembly. / 2000N / 5000N for M10 and 10 for M16 Q. Reference: KN

Q: How to read the display value of the 20 KN?
A: 20 KN shows 20.00 KN (2000 kgf) resolution 0.01 KN (1 kgf). Q Q QQ QQ he N display value of the MOTIVE official specification table for this line is printed as "20.00N " and the corresponding mass-resolution ratio is 20.00 KN, which has been amended in this table. Que

Q: Can you use the automation?Assem
A: Yes. Except for the RS232C/ USB digital interface, Also available -2 ~ +2 V Simulation of voltage output and +NG / OK / -NG open arctic comparison signal (MAX Z) XXC 10 mA) The automatic up and downs and the eligibility determination can be made directly from PLC, which is accompanied by the electrodynamic power station. Reference: 30 V

Q: How does precision be called? Can it be traced?!!?
A: 0.2 per cent (officially known accuracy of the Z2S series). Randomly accompanied by a check of accomplishment book, which can be sent in accordance with the relevant protocols such as JJG if it is required to be measured by a third party;;Systems of the Z2S series;Systems of the Systems of the Systranges; Daily verification in the field can be conducted using standard gauges or calibrated calibrated code matching. Reference: MOTIVE

Q: What should be the watchful side of daily usage?!?
A: 1 The force shall be directed at the sensor axis to avoid side-direction and bending; 2 Do not remain for long beyond 110 per cent and be discharged in time after warning; 3 Battery low voltage instructions appear and charged in a timely manner. Long-term absences should also be repeated at intervals;4 the environment is generally 0 ~ +40 °C, 20 ~ 80 % RH, avoiding condensation, Corrosionable gases and strong vibration environments;5 Regularly used standard gauges or coded verifications to maintain traceability.5

V. Qualified uses

  1. Short-scale measures and fractions of springs, springs, etc
  2. Switch key action measurement (phone, computer, remote control, film key)
  3. Connector, port insertion and pull test%
  4. End pull strength, silicon strength test%
  5. Cracking peaks for new materials such as glass, carbon, ceramics, plastics
  6. Built-plate, stick, wood, etc
  7. Strip test: duct tape, PCB, protective film, glued duct tape stripingA-Va-Va-Va-V
  8. Easily open cans, pull cans, and so on, to the peak when pulling
  9. The power line, the copper line, the pull-out test
  10. Switching TPN test: the touch power of the mechanical interface
  11. Stretch (extenssion) test of new materials such as rubber, film, etc
  12. Hardness test: density and hardness of tiles, fruits, lipstick, etc

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

MOTIVE Z2S-SW-20KN Force Gauges
Force Gauges

MOTIVE Z2S-SW-20KN Force Gauges

Z2S-SW-20KN
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-10KN Force Gauges
Force Gauges

MOTIVE Z2S-SW-10KN Force Gauges

Z2S-SW-10KN
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-5000N Force Gauges
Force Gauges

MOTIVE Z2S-SW-5000N Force Gauges

Z2S-SW-5000N
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-2000N Force Gauges
Force Gauges

MOTIVE Z2S-SW-2000N Force Gauges

Z2S-SW-2000N
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-1000N Force Gauges
Force Gauges

MOTIVE Z2S-SW-1000N Force Gauges

Z2S-SW-1000N
└ MOTIVE (Taiwan, China)
MOTIVE Z2S-SW-500N Force Gauges
Force Gauges

MOTIVE Z2S-SW-500N Force Gauges

Z2S-SW-500N
└ MOTIVE (Taiwan, China)