Home › Products

Product Overview

MH2-1000N Force & Material Testing (Model MH2-1000N) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. MH2-1000N Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.

Brand: See datasheet | Category: Force & Material Testing

Sales Inquiries: 15626018696 · 78403603@qq.com

MH2-1000N Force & Material Testing

Technical Specifications

ModelMH2-1000N
SeriesMH2 Series Motorised Type Unit units (units MOTIVE MOTIVE)
Range1000 N(Approx. 100 kgf)
Structure TypeType (Horizontal Direction plus )
Adjustment SpeedUse Disk Adjustment, Setting Resolution: [10 ~ 20 mm / min: 0.5 mm / min]; [20 ~ 100 mm / min: 5 mm / min]; [100 ~ 300 mm / min: 10 mm / min]
Can Adjustment Speed TypeOpen , Measurement, (three Range Speed Division Setting)
Measurement modeManual Mode (per above / under per Knob Shift ); Mode (Rotation Dial, Approx. per Revolution 0.05 mm); Ring Mode (at two pcs Stroke Limit Knob Ring)
Ring ModeRepeat Test Times Maximum 65535 times (with Meter when Device); Time Maximum 99 Division 59 s
Setting ModeSpeed, Measurement Speed, Range Speed, Time, Ring Times, external Configuration Mode
Matching Instrument GaugeSuitable with MOTIVE Digital and Mechanical Force Gauges( optional)
NotesType Structure Suitable Horizontal , and Service Life Test; Dimensions to Official Dimensions Diagram or Sales Accuracy

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. (a) Horizontal structure: A horizontally loaded direction suitable for plug-in, push-live and horizontal stretching tests, with sample chargers more closely aligned to the actual operational posture.?.Stampsss
  2. Three-stage velocity independent setting: start speed, measure velocity, return speed set separately, slow approach to the sample, steady measure, quick return, and more reasonable beat
  3. Quick speed dial: velocity is directly adjusted by dial, with resolution set by region to 0.5/5/10 mm/min without on-site switch to the menu
  4. Jogging mode: The twarts are approximately 0.05 mm per circle and are used to fine-tune the clips to the sample.A-Stamps
  5. Cycle life test: The cycle mode is 65535 times, the maximum 99 minutes 59 seconds is suspended and the extended unattended extended life-exposure test is performed. X-H X-H X-EX seconds. X-Enginet X- seconds QS
  6. Applies MOTIVE thrustometers: both numerical and mechanical, and is based on a quantum range

Applied trade & test object

The horizontal thrust and interpolation lifetime test applicable to the connector and end, the key press, switch, the horizontal thrust pull test of the slider and the sample requires the horizontal stretch, compression and fatigue test of the attitude jacket

FAQ

Q: What is the difference between MH2 and MX/ MX2?

A: MH2 is a horizontal (hierarchical) platform, and MX/MX2 is a vertical (vertical) platform. MH2 for plug-in, horizontal push and horizontal lifetime tests; Vertical loading test selection MX/ MX2 for stretching, compression, cutting etc

Q: How many times can the circular mode be done?

A: Maximum number of 65535 times (used with timer) with a time-suspension maximum 99 minutes 59 seconds to cover the majority of the need for extended life and fatigue tests

Q: How do you set the speed?

A: Adjusted by dial on the platform with resolution by region: 10 — 20 mm/min with 0.5 mm/min, he 2010 mm/min area is 5 mm/min, which is the first time that the project has been launched. The 100-300 mm/min zone is 10 mm/min; the velocity for start-up, measurement and return may be set separately. Reference: 100. Reference values: 20.

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

MOTIVE Fully Automatic Insertion/Extraction Force Tester
Force & Material Testing

MOTIVE Fully Automatic Insertion/Extraction Force Tester

└ MOTIVE Test Stands
7100s Force & Material Testing
Force & Material Testing

7100s Force & Material Testing

7100s
└ MOTIVE Test Stands
JOB-C10N Force & Material Testing
Force & Material Testing

JOB-C10N Force & Material Testing

JOB-C10N
└ MOTIVE Test Stands
JSV-500H Force & Material Testing
Force & Material Testing

JSV-500H Force & Material Testing

JSV-500H
└ MOTIVE Test Stands
MX-2000N Force & Material Testing
Force & Material Testing

MX-2000N Force & Material Testing

MX-2000N
└ MOTIVE Test Stands
MX2-1000N-L Force & Material Testing
Force & Material Testing

MX2-1000N-L Force & Material Testing

MX2-1000N-L
└ MOTIVE Test Stands