Home › Products

Product Overview

MOTIVE Fully Automatic Insertion/Extraction Force Tester is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. MOTIVE automatic connector insertion/extraction force tester, 0-50 kg load, 0.01 kgf resolution, 150 mm stroke, 0-150 mm/min.

Brand: See datasheet | Category: Force & Material Testing

Sales Inquiries: 15626018696 · 78403603@qq.com

MOTIVE Fully Automatic Insertion/Extraction Force Tester

Technical Specifications

ModelFull Automatic Force Test Unit
SeriesFull Automatic Force Test Unit (units MOTIVE MOTIVE)
Maximum Test Load0 ~ 50 kg
Load Minimum Reading Value0.01 kgf
Maximum Range150 mm
Minimum Micro Adjustment Distance0.01 mm
Test Speed Range0 ~ 150 mm/min
Fixture Disk DimensionsΦ200 mm
Control Welding Systems Dimensions450 × 560 × 100 mm
Unit Unit Dimensions430 × 280 × 1150 mm
Unit Unit Net Weight70 kg
Unit Unit Power SupplyAC 220V 50Hz
Control Welding Systemsup to + Windows Control Welding Systems, can Setting Stroke, Speed, Times and Time, with Documentation can Storage
Fixtureeach Dedicated Clamp Fixture can Connection Device at Test when Automatic to Standard, 「 Single Edge 」
Test ContentsConnection Device Insertion Force and Output, Meter Calculation Unit Analysis to Load and Stroke to Wire

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Automatically: The data are more accurate when the various special fixes are tested to allow the connectors to automatically target, and to solve the problem of "square eating" caused by artificial bits
  2. Accurate curve: Computer analysis of the corresponding change curve with the weight of the process, with peaks, inserts and pulls visible
  3. Parameters are controlled: The process, speed, frequency and pause are set and the test conditions can be repeated as required by standard
  4. High resolution: The minimum reading value of the GHz is 0.01 kgf, the minimum fine-tune distance 0.01 mm, and the penetration differentials of the microconnector are also identifiable
  5. Server driver: Server motor drive, stable, accurate location, better repeat than cylinder or manual
  6. Full storage of data: Windows control system can store all test information for retroactive and report generation.!
  7. Easy to operate: Windows interface, setting and starting are both visual

Applied trade & test object

For insertion and pull tests for various types of connectors (USB, Type-C, needle-team, end, card), electronics, car beams, telecommunication equipment connectors, and R & D validation, And where standard interpolation lifetime and interpolation curves are required

FAQ

Q: What do you mean, "eat one-sided"?

A: The connector plug-in is not fully aligned with the plug-in, and only one side is pre-resistance when inserted, which leads to measured hyperpluging or curve abnormality. This problem is avoided by the automatic alignment of the connector with the special machine-set

Q: Do you have enough weight for 50 kg? Q

A: 50 kg (approximately 490 N) covers the range of plug-in power of most consumer electron-car connectors. If a higher weight or smaller resolution is required, the sample is given a different type of machine according to the actual strength of the sample

Q: Can you measure the interpolation lifetime?

A: Yes. Devices can set the number of times to be plugged and the time to be suspended, perform multiple times and record the load-trip curves for each time, for the life-and-power-decompression analysis

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

7100s Force & Material Testing
Force & Material Testing

7100s Force & Material Testing

7100s
└ MOTIVE Test Stands
JOB-C10N Force & Material Testing
Force & Material Testing

JOB-C10N Force & Material Testing

JOB-C10N
└ MOTIVE Test Stands
JSV-500H Force & Material Testing
Force & Material Testing

JSV-500H Force & Material Testing

JSV-500H
└ MOTIVE Test Stands
MX-2000N Force & Material Testing
Force & Material Testing

MX-2000N Force & Material Testing

MX-2000N
└ MOTIVE Test Stands
MH2-1000N Force & Material Testing
Force & Material Testing

MH2-1000N Force & Material Testing

MH2-1000N
└ MOTIVE Test Stands
MX2-1000N-L Force & Material Testing
Force & Material Testing

MX2-1000N-L Force & Material Testing

MX2-1000N-L
└ MOTIVE Test Stands