Home › Products

Product Overview

AND GR-202 Electronic Balances (Model GR-202) is a Electronic Balances supplied by Guangzhou Yunke Electronics Co., Ltd. AND GR-202 Electronic Balances — Electronic Balances · Yunke Electronics. Request a quotation and datasheet.

Brand: AND | Category: Electronic Balances

Sales Inquiries: 15626018696 · 78403603@qq.com

AND GR-202 Electronic Balances

Technical Specifications

ModelGR-202
SeriesA&D GR Series
CategoryHalf Micro Quantity Analytical Balances(Half Micro Quantity Analytical Balances, 0.01 mg Reading can up to 42 g)
Brand / OriginA&D(JapanAND / A&D Company, Limited)
Official Series PositioningSemi-Micro Analytical Balances
Maximum Capacity42 g/210 g
Readability (Graduation d)0.01 mg/0.1 mg
Accuracy ClassDivision a
Measuring Range of This Series42 g ~ 310 g(Official model list for this series)
Reading Range of This Series0.01 mg / 0.1 mg / 0.1 mg(Official model list for this series)
Repeatability (Standard Deviation)0.02 mg/0.1 mg
Linearity Error±0.03 mg /±0.2 mg
Sensitivity (10~30℃)±2 ppm/˚C (when automatic self calibration is not used)
Pan SizeØ85 mm
Functions and Interfaces (per Official Icons)Software: Data management software available
Optional Accessories (Official)AD-1653:Density determination Kit

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Technical Specifications

The following table is the official specification of GR-202, the data being taken from the specification table of the series of pages of the A&D Japanese Official Network, without conversion or rewriting

A&D GR series, sales-based comparisonSignage-Current Models.StampsStightStamps

The following table shows the full number and key parameters currently on sale in the official A&D GR series, which is marked to facilitate horizontal comparison of volume and reading

ModelMaximum CapacityReadability (Graduation)
GR-20242 g/210 g0.01 mg/0.1 mg
GR-120120 g0.1 mg
GR-200210 g0.1 mg
GR-300310 g0.1 mg

Key Advantages

  1. Half-miciliary 0.01 mg readings, up to 42 g (GR-202)
  2. Prep the pole, open the aneurysm from either side, and take out the efficiency
  3. Airframe only 249 x 330 mm, saving desktop spaceSp
  4. Responsible properties reticible (manual/ auto) to air currents and vibrations
  5. Temperature changes are automatically calibrated and accuracy maintained
  6. Anti-static glass wind shield (spray metal coating)
  7. Multiple units of measure: g, mg, oz, ozt, ct, mom, dwt, grain, weight
  8. GLP/GMP/GCP/ISO Compliance Output

Applied industry & test project

Selection Guide

  1. First choose the readability (graduation)The measurement error is usually assessed by reading and minimum; the sample is much more of a machine-type that is more economical than reading. One in 10,000 (0.0001 g) and above are used for analytical grade and one in 1,000 and below for conventional precision
  2. Then choose the maximum capacityThe common sample + container mass should be dropped between the maximum amount of 20%~80% to avoid long-term close to full process use
  3. Internal or external calibrationone key or automatic calibration of the machine type with built-in calibration codes such as GX / FZ / BA for high frequency usage and temperature fluctuations; / / / FZ / BA / / / / BA XX XX / / / / / / / / / / The GF / FX / BH base type needs to be extra external coded
  4. Whether the environment is humid or dustyIP65 dustproofing machine with an optional WP suffix (e.g. FX-223WP, GX-AWP, GX-M / GF-M). XX / GF-M XVX

FAQ

Q: What are the readings (points) of GR-202?

A: The official specification table gives a reading (d by fraction) of 0.01 mg with a maximum value of 42 g/210 g. The double-volume model gives two reading files, High-precision brackets are valid only at a smaller stage.!. Reference: GR-202

Q: What about A&D and DeAnte, SETRA scales?

A: All three brands cover between one and one in 10,000: A&D is the most complete model on micro- and semi-minimum (0.001 mg ~ 0.01 mg) and built-in calibration machine models. Q1 Also have unique features such as ISD impact detection, ECL electronic control load; the technical precision of the DeAnte ES series; and SETRA primary value for money. The selection remains in order of magnitude. Readers and calibrations are on the basis of the number of readings.!

Q: Can this scale be used for density measurements?

A: Most A&D analysis/ precision skyband ( + hook) for density and weighting with official density measurement components (e.g. AD-1653/ AD-1654); The applicability of specific accessories to GR-202 is based on the official list of selected accessories

Q: How often does it take to calibrate?!?

A: It is recommended that verification be performed during the use of frequency and environment: the type of machine with built-in calibration codes can be automatically calibrated on a daily or per start-up basis; the external calibration type needs to be extra coded. Officially, minimum volume and duplicate verification functions are provided. The cycle can be created by the GLP/GMP requirement

Q: Is the product picture the official original?

A: An official original, but not a separate product. A&D officially provides a series of product photos, and the official product of the A&D GR series is shown on this page. Standardised white bottom with watermarks, as per the official original. Model differences are in the sign and specification parameters, as shown in the specification table on this page

Q: Can data be exported or printed??

A: Yes. A&D scale with RS-232C or USB interfaces to support GLP/GMP/GCP/ISO compliance output, connecting official printers such as AD-8129TH, Or export to a computer via the lanCT series.!

Q: How do you confirm the offer and the period of submission?!

A: The price is not officially marked on a public page. Please contact the salesman of Guangzhou Yunke Electronics Co., Ltd. to confirm the price, spot and delivery of GR-202; the price is not displayed on this page

Q: Are calibration certificates provided with the goods? Q: Q

A: Standard configuration usually does not include a third-party certificate. If you want to check a certificate/calibration certificate or a certificate from the Institute of Metrology, please specify at the next list that we can arrange it

About the Product Images on This Page

A&D officially provides product photos in series, consistent with a series of different models, so this page is an official product picture of the series, with variations in model numbers on the specification parameters of the model, volume and readings. Please refer to this page specification table. Pictures are standardized for the white bottom and watermarked as originally prepared and not replaced by a crowned plume.ScrewScreechSceneSc

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

AND MX-50 Electronic Balances
Electronic Balances

AND MX-50 Electronic Balances

MX-50
└ AND (Japan)
AND ML-53A Electronic Balances
Electronic Balances

AND ML-53A Electronic Balances

ML-53A
└ AND (Japan)
AND MF-53A Electronic Balances
Electronic Balances

AND MF-53A Electronic Balances

MF-53A
└ AND (Japan)
AND MX-53A Electronic Balances
Electronic Balances

AND MX-53A Electronic Balances

MX-53A
└ AND (Japan)
AND MX-53AT Electronic Balances
Electronic Balances

AND MX-53AT Electronic Balances

MX-53AT
└ AND (Japan)
AND MS-74A Electronic Balances
Electronic Balances

AND MS-74A Electronic Balances

MS-74A
└ AND (Japan)