Home › Products

Product Overview

AND GX-10202M Electronic Balances (Model GX-10202M) is a Electronic Balances supplied by Guangzhou Yunke Electronics Co., Ltd. AND GX-10202M Electronic Balances — Electronic Balances · Yunke Electronics. Request a quotation and datasheet.

Brand: AND | Category: Electronic Balances

Sales Inquiries: 15626018696 · 78403603@qq.com

AND GX-10202M Electronic Balances

Technical Specifications

ModelGX-10202M
SeriesA&D Apollo GX-M / GF-M Series
CategoryLarge Weighing Precision Electronic Balances(in Range Large Weighing Precision Balances, IP65 Dustproof Waterproof, Reading Maximum 0.01 g)
Brand / OriginA&D(JapanAND / A&D Company, Limited)
Official Series PositioningHigh-Capacity Precision Balances
Maximum Capacity10.2 kg
Readability (Graduation d)0.01 g
Accuracy ClassDivision a
Measuring Range of This Series2.2 kg ~ 32.2 kg(Official model list for this series)
Reading Range of This Series0.01 g / 0.01 g / / 0.1 g* / 0.1 g / 0.1 g / / 1 g*(Official model list for this series)
Repeatability (Standard Deviation)0.01 g
Linearity Error±0.03 g
Stabilization TimeApprox. 1.5 seconds
Counting Mode · Minimum Single Weight0.1 g
Counting Mode / Number of Samples10, 25, 50 or 100 pieces
Percent Mode / Minimum 100% Reference Mass10 g
Percent Reading Resolution0.01%, 0.1% or 1% (depends on the reference mass stored)
Pan Size270 mm × 210 mm
Dimensions300 (W) × 355 (D) × 111 (H) mm
Net WeightGX-M: Approx. 9.3 kg / GF-M: Approx. 8.3 kg
Functions and Interfaces (per Official Icons)Software: Data management software available

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Technical Specifications

The following table is the official specification of GX-10202M, the data being taken from the specification table of the series of pages of the A&D Japanese Official Network, without conversion or rewriting

A&D GX-M / GF-M seriess for sale model

The following table shows the official A&D GX-M / GF-M series All models and key parameters currently on sale, the current model is marked to facilitate horizontal comparison of volume and reading

ModelMaximum CapacityReadability (Graduation)
GX-8202M8.2 kg0.01 g
GF-8202M8.2 kg0.01 g
GX-8202MD2.2 kg / / 8.2 kg*0.01 g / / 0.1 g*
GF-8202MD2.2 kg / / 8.2 kg*0.01 g / / 0.1 g*
GX-10202M10.2 kg0.01 g
GF-10202M10.2 kg0.01 g
GX-12001M12.2 kg0.1 g
GF-12001M12.2 kg0.1 g
GX-22001M22.2 kg0.1 g
GF-22001M22.2 kg0.1 g
GX-32001M32.2 kg0.1 g
GF-32001M32.2 kg0.1 g
GX-32001MD6.2 kg / / 32.2 kg*0.1 g / / 1 g*
GF-32001MD6.2 kg / / 32.2 kg*0.1 g / / 1 g*

Key Advantages

  1. IP65 Dustproof water, adapted to dust and drop-drop samplesA-Vamin
  2. Impact detection (ISD) feedback tips to protect the heavy sensorsS
  3. FRD traffic display, traffic calculation and recording are easier
  4. Impact log function to record the impact events at 50 with a time stampScreechPackageScretScrellsScret
  5. Bressed structure below scale, significantly mitigating impact
  6. Flow comparisoner, indicate whether the flow is within the set range
  7. Decoder memory function for skin value in non-lossible storage%
  8. Automatic calibration at set time or at temperature change (GX-M)
  9. Minimum measure is automatically calculated, lower than the set value alarm
  10. UAC User Permission Management, Password to Prevent Misaction
  11. GLP/GMP/GCP/ISO Compliance Output, UFC Customized Print

Applied industry & test project

Selection Guide

  1. First choose the readability (graduation)The measurement error is usually assessed by reading and minimum; the sample is much more of a machine-type that is more economical than reading. One in 10,000 (0.0001 g) and above are used for analytical grade and one in 1,000 and below for conventional precision
  2. Then choose the maximum capacityThe common sample + container mass should be dropped between the maximum amount of 20%~80% to avoid long-term close to full process use
  3. Internal or external calibrationone key or automatic calibration of the machine type with built-in calibration codes such as GX / FZ / BA for high frequency usage and temperature fluctuations; / / / FZ / BA / / / / BA XX XX / / / / / / / / / / The GF / FX / BH base type needs to be extra external coded
  4. Whether the environment is humid or dustyIP65 dustproofing machine with an optional WP suffix (e.g. FX-223WP, GX-AWP, GX-M / GF-M). XX / GF-M XVX

FAQ

Q: What are the readings (points) of GX-10202M?

A: The official specification table gives a reading (d by fraction) of 0.01 g with a maximum amount of 10.2 kg. The double-degree model gives two readings, and the high-precision is valid only in a smaller section of the range._. Reference: GX-10202M

Q: What's the difference between GX and GF?SQ

A: A&D naming rules, GX for built-in calibration code type (automatic calibration with one key), GF base type (required external calibration); process, The readings are consistent with the size of the aircraft and the differences are calibrated.!

Q: What about A&D and DeAnte, SETRA scales?

A: All three brands cover between one and one in 10,000: A&D is the most complete model on micro- and semi-minimum (0.001 mg ~ 0.01 mg) and built-in calibration machine models. Q1 Also have unique features such as ISD impact detection, ECL electronic control load; the technical precision of the DeAnte ES series; and SETRA primary value for money. The selection remains in order of magnitude. Readers and calibrations are on the basis of the number of readings.!

Q: Can this scale be used for density measurements?

A: Most A&D analysis/ precision skyband ( + hook) for density and weighting with official density measurement components (e.g. AD-1653/ AD-1654); The applicability of specific accessories to GX-10202M is based on the official list of selected accessories

Q: How often does it take to calibrate?!?

A: It is recommended that verification be performed during the use of frequency and environment: the type of machine with built-in calibration codes can be automatically calibrated on a daily or per start-up basis; the external calibration type needs to be extra coded. Officially, minimum volume and duplicate verification functions are provided. The cycle can be created by the GLP/GMP requirement

Q: Is the product picture the official original?

A: An official original, but not a separate product photograph of this model.A&D provides a series of product photos.Ass.Ass.Ass.Ass.Ass.Ass.s.Ass.s.s. This page is illustrated by the official product of the A&D GX-M/GF-M series, which is standardized with the official original white base and watermarked. Model differences are in the label and specification parameters, as shown in the table of specifications on this page

Q: Can data be exported or printed??

A: Yes. A&D scale with RS-232C or USB interfaces to support GLP/GMP/GCP/ISO compliance output, connecting official printers such as AD-8129TH, Or export to a computer via the lanCT series.!

Q: How do you confirm the offer and the period of submission?!

A: The price is not officially marked on a public page. Please contact the salesman of Guangzhou Yunke Electronics Co., Ltd. to confirm the price, spot and delivery of GX-10202M; the price is not displayed on this page

Q: Are calibration certificates provided with the goods? Q: Q

A: Standard configuration usually does not include a third-party certificate. If you want to check a certificate/calibration certificate or a certificate from the Institute of Metrology, please specify at the next list that we can arrange it

About the Product Images on This Page

A&D officially provides product photos in series, consistent with a series of different models, so this page is an official product picture of the series, with variations in model numbers on the specification parameters of the model, volume and readings. Please refer to this page specification table. Pictures are standardized for the white bottom and watermarked as originally prepared and not replaced by a crowned plume.ScrewScreechSceneSc

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

AND MX-50 Electronic Balances
Electronic Balances

AND MX-50 Electronic Balances

MX-50
└ AND (Japan)
AND ML-53A Electronic Balances
Electronic Balances

AND ML-53A Electronic Balances

ML-53A
└ AND (Japan)
AND MF-53A Electronic Balances
Electronic Balances

AND MF-53A Electronic Balances

MF-53A
└ AND (Japan)
AND MX-53A Electronic Balances
Electronic Balances

AND MX-53A Electronic Balances

MX-53A
└ AND (Japan)
AND MX-53AT Electronic Balances
Electronic Balances

AND MX-53AT Electronic Balances

MX-53AT
└ AND (Japan)
AND MS-74A Electronic Balances
Electronic Balances

AND MS-74A Electronic Balances

MS-74A
└ AND (Japan)