Home › Products

Product Overview

AND EK-600i Electronic Balances (Model EK-600i) is a Electronic Balances supplied by Guangzhou Yunke Electronics Co., Ltd. AND EK-600i Electronic Balances — Electronic Balances · Yunke Electronics. Request a quotation and datasheet.

Brand: AND | Category: Electronic Balances

Sales Inquiries: 15626018696 · 78403603@qq.com

AND EK-600i Electronic Balances

Technical Specifications

ModelEK-600i
SeriesA&D EK-i / EW-i Series
CategoryType Electronic Balances( Type Electronic Balances, SUS304 not Steel Disk, EW-i is three Range)
Brand / OriginA&D(JapanAND / A&D Company, Limited)
Official Series PositioningCompact Balances
Maximum Capacity600 g
Readability (Graduation d)0.1 g
Accuracy ClassDivision a
Measuring Range of This Series30 g ~ 12 kg(Official model list for this series)
Reading Range of This Series0.01 g / 0.01 g / 0.02 g / 0.05 g / 0.1 g / 0.1 g / 0.2 g / 0.5 g / 1 g / 1 g / 2 g / 5 g(Official model list for this series)
Pan Size170 mm × 133 mm
Functions and Interfaces (per Official Icons)Software: Data management software available

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Technical Specifications

The following table is the official specification of EK-600i, the data being taken from the specification table of the series of pages of the A&D Japanese Official Network, without conversion or rewriting

A&D EK-i / EW-i series is selling a comparison of the model

The following table shows the full number and key parameters currently on sale in the official A&D EK-i / EW-i series, which is marked to facilitate horizontal comparison of volume and reading: / 1 Q X Q / All models and key parameters currently on sale : / / / / / / / / / / / / / / / / / / / / /

ModelMaximum CapacityReadability (Graduation)
EK-120i120 g0.01 g
EK-200i200 g0.01 g
EK-300i300 g0.01 g
EK-410i400 g0.01 g
EK-610i600 g0.01 g
EK-600i600 g0.1 g
EK-1200i1200 g0.1 g
EK-2000i2000 g0.1 g
EK-3000i3000 g0.1 g
EK-4100i4000 g0.1 g
EK-6100i6000 g0.1 g
EK-6000i6000 g1 g
EK-12Ki12000 g1 g
EW-150i30 g / 60 g / 150 g0.01 g / 0.02 g / 0.05 g
EW-1500i300 g / 600 g / 1500 g0.1 g / 0.2 g / 0.5 g
EW-12Ki3000 g / 6000 g / 12000 g1 g / 2 g / 5 g

Key Advantages

  1. SUS304 stainless steel scales, hygienic and chemical-resistant
  2. Responsible properties retortable to air currents and vibrations
  3. Multiple units of magnitude (additional tael, tola, N as required)
  4. Marked RS-232C interface
  5. Count mode ACAI Auto Count
  6. Percentage mode versus bee-beep comparison function%%%11%2
  7. Triple measure (EW-i series)
  8. Overload protection and anti-piracy security locks
  9. Auto-cutting function, optional for chargeable batteries%

Applied industry & test project

Selection Guide

  1. First choose the readability (graduation)The measurement error is usually assessed by reading and minimum; the sample is much more of a machine-type that is more economical than reading. One in 10,000 (0.0001 g) and above are used for analytical grade and one in 1,000 and below for conventional precision
  2. Then choose the maximum capacityThe common sample + container mass should be dropped between the maximum amount of 20%~80% to avoid long-term close to full process use
  3. Internal or external calibrationone key or automatic calibration of the machine type with built-in calibration codes such as GX / FZ / BA for high frequency usage and temperature fluctuations; / / / FZ / BA / / / / BA XX XX / / / / / / / / / / The GF / FX / BH base type needs to be extra external coded
  4. Whether the environment is humid or dustyIP65 dustproofing machine with an optional WP suffix (e.g. FX-223WP, GX-AWP, GX-M / GF-M). XX / GF-M XVX

FAQ

Q: What are the readings (points) of EK-600i?

A: The official specification table gives a reading (d by fraction) of 0.1 g with a maximum amount of 600 g. The double-degree model gives two readings, and the high-precision is valid only in a smaller section of the range._. Reference: EK-600i

Q: What about A&D and DeAnte, SETRA scales?

A: All three brands cover between one and one in 10,000: A&D is the most complete model on micro- and semi-minimum (0.001 mg ~ 0.01 mg) and built-in calibration machine models. Q1 Also have unique features such as ISD impact detection, ECL electronic control load; the technical precision of the DeAnte ES series; and SETRA primary value for money. The selection remains in order of magnitude. Readers and calibrations are on the basis of the number of readings.!

Q: Can this scale be used for density measurements?

A: Most A&D analysis/ precision skyband ( + hook) for density and weighting with official density measurement components (e.g. AD-1653/ AD-1654); The applicability of specific accessories to EK-600i is based on the official list of selected accessories

Q: How often does it take to calibrate?!?

A: It is recommended that verification be performed during the use of frequency and environment: the type of machine with built-in calibration codes can be automatically calibrated on a daily or per start-up basis; the external calibration type needs to be extra coded. Officially, minimum volume and duplicate verification functions are provided. The cycle can be created by the GLP/GMP requirement

Q: Is the product picture the official original?

A: An official original, but not a separate product photograph of this model.A&D provides a series of product photos.Ass.Ass.Ass.Ass.Ass.Ass.s.Ass.s.s. This page is illustrated by the official product of the A&D EK-i / EW-i series, which is standardized with the official original map and watermarked. The model is different in the description of the sign and the specification parameters. Please refer to this page specification.!

Q: Can data be exported or printed??

A: Yes. A&D scale with RS-232C or USB interfaces to support GLP/GMP/GCP/ISO compliance output, connecting official printers such as AD-8129TH, Or export to a computer via the lanCT series.!

Q: How do you confirm the offer and the period of submission?!

A: The price is not officially marked on a public page. Please contact the salesman of Guangzhou Yunke Electronics Co., Ltd. to confirm the price, spot and delivery of EK-600i; the price is not displayed on this page

Q: Are calibration certificates provided with the goods? Q: Q

A: Standard configuration usually does not include a third-party certificate. If you want to check a certificate/calibration certificate or a certificate from the Institute of Metrology, please specify at the next list that we can arrange it

About the Product Images on This Page

A&D officially provides product photos in series, consistent with a series of different models, so this page is an official product picture of the series, with variations in model numbers on the specification parameters of the model, volume and readings. Please refer to this page specification table. Pictures are standardized for the white bottom and watermarked as originally prepared and not replaced by a crowned plume.ScrewScreechSceneSc

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

AND MX-50 Electronic Balances
Electronic Balances

AND MX-50 Electronic Balances

MX-50
└ AND (Japan)
AND ML-53A Electronic Balances
Electronic Balances

AND ML-53A Electronic Balances

ML-53A
└ AND (Japan)
AND MF-53A Electronic Balances
Electronic Balances

AND MF-53A Electronic Balances

MF-53A
└ AND (Japan)
AND MX-53A Electronic Balances
Electronic Balances

AND MX-53A Electronic Balances

MX-53A
└ AND (Japan)
AND MX-53AT Electronic Balances
Electronic Balances

AND MX-53AT Electronic Balances

MX-53AT
└ AND (Japan)
AND MS-74A Electronic Balances
Electronic Balances

AND MS-74A Electronic Balances

MS-74A
└ AND (Japan)