Home › Products

Product Overview

NIDEC-SHIMPO FGS-50E-L Force & Material Testing (Model FGS-50E-L) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO FGS-50E-L Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.

Brand: NIDEC-SHIMPO | Category: Force & Material Testing

Sales Inquiries: 15626018696 · 78403603@qq.com

NIDEC-SHIMPO FGS-50E-L Force & Material Testing

Technical Specifications

ModelFGS-50E-L
SeriesFGS-50E Series Length Stroke Motorised Measuring Force Instrument Test pcs Stand (NIDEC-SHIMPO New )
CategoryMeasuring Force Instrument pcs Stand / Load Test units (Motorised)
Brand / OriginNIDEC-SHIMPO( New , Japan New SHIMPO)
Drive MethodMotorised (Low Specifications)
Meter Measure Load500 N
Load500 N
Speed6 ~ 180 mm/min
Speed SettingOperation Surface Plate Setting
Stroke400 mm
Display PartLCD 3 digits, Display Shift Speed and Mode
ModeManual (MANU) / (JOG) / Single Ring (SIG) / (CON)
Overload InputConnection FGPX(FGP) Overload Signal and
Measurement Unit93 × 150 mm
Operating Temperature Range0 ~ 45 ℃(non-condensing)
Power SupplyAC100 V ~ AC230 V ±10%
MassApprox. 20 kg
DimensionsWidth 220 × Depth 358 × Height 680 mm(Official Catalogue per 220×680×358 mm )
Can Installation Measuring Force InstrumentFGJN-2 ~ 50 / FGP-0.2 ~ 50 / FGPX-0.2 ~ 50
Supplied AccessoriesConnection Wire 1 pcs, Power Cable 1 pcs, Wire Clamp 1 pcs, internal six Angle (M4×8 Measuring Force Instrument Installation Use 4 pcs, M6×12 Fixture Installation Use 2 pcs), six Angle Wrench M6 Use 1 pcs and M4 Use 1 pcs
Product imageOfficial Product Diagram (FGS-50E-L and FGS-50E-H is Same a Official records , Official total Use Same a Diagram)
NotesOfficial in Text will Input Power Supply AC100 ~ 240V Width Voltage; This Gauge by Official Day Text Catalogue AC100V ~ AC230V ±10% is Standard. Unit units is plus Unit , Force Value by optional Measuring Force Instrument Reading Output.

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Long-range 400 mm pillar: A single-loading clip covers a larger range of highly variable samples and does not require frequent reloading of the product
  2. Four modes of action: manual (MANU), infractor (JOG), single cycle (SIG), repeat (CON), in which repeat pattern is suitable for key press, shrapnel, (c) Persistence tests for glue products
  3. The speed of entry is set in two stages: the low speed specification 6 — 180 mm/min is more suitable for the crispy elements and the tests that require careful observation of the destruction process
  4. Autostopping of overload: Immediately ceases after receiving the over-mounted signal from the FGPX (FGP) meter, protecting the meter and the work
  5. Security front caps and clear LCD panels: LCD 3 bits display moving speed and movement patterns, set and read as easily as possible
  6. Broad voltage input AC100V ~ AC230V 10% is available directly for use both domestically and exportable positions

Applied trade & test object

Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, bending, etc. The damage and the glue-strength test is used to impose a stable, consistent payload. Develops validation and control tables. The platform itself is the loading agency with the power values read out by the series of NIDEC-SHIMPO FGP/ FGPX/FGJN

About the Product Images on This Page

NIDEC Officially placed FGS-50E-L under the same product entry as FGS-50E-H and shared the same official product photograph (the difference is in the way they look, in the type and capacity, speed, The image on this page is the official original of the purpose of the item, which is standardized and watered with a white bottom, without replacing the name of the crown, and the model difference is as shown in the specification table on this page

FAQ

Q: What's the difference between FGS-50E-L and FGS-50E-H? Q: Q: Q

A: Only speed of entry is missing. FGS-50E-L is a low speed specification 6 ~ 180 mm/min, FGS-50E-H is the high-speed specification 20 — 600 mm/min, with the remaining charge weight 500 N, process 400 mm, X XQu The test stand 93 x 150 mm, which is all the same with approximately 20 kg mass, requires a clear view of the destruction process, a sample that is more brittled to select L; a beat-tick, a mass repeat test option H

Q: The platform contains a non-calculator?

A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the instrumentation.. The station may be equipped with a FGP/FGPX digital aerometric instrument or FGJN economic instrument, which is sufficient to select the corresponding measure according to the measured value. The officially identified installed machines are FGJN-2 — 50, FGP-0. 2 — 50, FGPX-0. 2 — 50. Reference: NIDEC-SHIMPO. Reference values: 0.2.

Q: Can you do tests other than compression and stretching?

A: Yes. The platform provides four modes of action: manual, inflexive, single loop, repeat and repeat, which, in conjunction with the corresponding special treatment, completes the tests of compression, stretching, stripping, interpolation, bending and durability; the treatment is separately tailored to the sample shape

Q: What are the requirements for power and installation?

A: Input power to AC100V — AC230 V 10% (official Chinese page writing AC100 — 240V wide voltage) Randomly attached power lines and connections, occupying a surface of approximately 220 x 358 mm, machine quality of approximately 20 kg, are recommended for use on a solid horizontal table

Q: Is the product picture the official original?

A: NIDEC Officially placed FGS-50E-L under the same product entry and shared the same official product photograph (both look identical, the difference is in the sign type and capacity, speed, speed, etc.) The image on this page is the official original of the purpose of the item, which is standardized and watered with a white bottom, without replacing the name of the crown, and the model difference is as shown in the specification table on this page._._._._._. Reference: FGS-50E-H

Reference values from the original datasheet: 0.2.

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

NIDEC-SHIMPO FGS-5000TV Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-5000TV Force & Material Testing

FGS-5000TV
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-TV Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-TV Force & Material Testing

FGS-TV
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-50L Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-50L Force & Material Testing

FGS-50L
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-5S Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-5S Force & Material Testing

FGS-5S
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-50H Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-50H Force & Material Testing

FGS-50H
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-250VC Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-250VC Force & Material Testing

FGS-250VC
└ SHIMPO Test Stands