Home › Products

Product Overview

NIDEC-SHIMPO FGS-100VC Force & Material Testing (Model FGS-100VC) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO FGS-100VC Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.

Brand: NIDEC-SHIMPO | Category: Force & Material Testing

Sales Inquiries: 15626018696 · 78403603@qq.com

NIDEC-SHIMPO FGS-100VC Force & Material Testing

Technical Specifications

ModelFGS-100VC
SeriesFGS-100VC / 250VC Type Motorised Measuring Force Instrument Dedicated pcs Stand (NIDEC-SHIMPO New )
CategoryMeasuring Force Instrument pcs Stand / Type Motorised Test units (Height Capacity Type)
Brand / OriginNIDEC-SHIMPO( New , Japan New SHIMPO)
Drive MethodMotorised ( Type, Type )
Meter Measure Load1000 N(100 kg)
Load1000 N(100 kg)
Speed10 ~ 400 mm / min(Operation Surface Plate Setting)
Stroke400 mm
Display Partpoints LCD, with No. 4 digits
Display ContentsShift Speed 10 ~ 400 mm / min / Shift Distance 0.0 ~ 400.0 mm / Repeat Times 0 ~ 9999
ModeMANU Mode (Shift to Limit digits ) / JOG Mode () / SING Mode (Limit digits Single times Shift ) / CONT Mode (Limit digits Shift ) / PROG Mode (5 points Position Shift )
CommunicationUSB(Connection Electric Use)
Matching SoftwareFGT-VC Dedicated Communication Software (USB to , Official website under ); can Output and Distance Data and Display Wire, with Trigger Functions (up to to Setting Load Rear Open Number), Continuous Number Times Setting, Hi / Lo Limit Judgment
Overload InputConnection FGPX(FGP) Overload Signal and
Measurement Unit150 × 200 mm
Operating Temperature Range0 ~ 45 ℃(non-condensing)
Power SupplyAC100 V ±10%
MassApprox. 63 kg
Can Installation Measuring Force InstrumentFGP-0.2 ~ 50, 100 / FGPX-0.2 ~ 50, 100(can Measure 2 N ~ 1000 N)
Supplied AccessoriesPower Cable, FGPX(FGP) Use Connection Wire, USB Wire
OtherMeasuring Force Instrument Use Power Supply AC Base, Open
Product imageOfficial Product Diagram (FGS-100VC and FGS-250VC is Same a Official records , Official total Use Same a Diagram)
NotesUnit units is plus Unit , Force Value by optional Measuring Force Instrument Reading Output; Actual can Measure Load Upper Limit by Installed FGP / FGPX Rated Capacity is Standard.

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. The 1000 N (100 kg) capacity: covers the width of the range from 2 N to 1000 N, and the same machine can be replaced with different scale measures
  2. Five action mode + 5 Point Location: MANU/ JOG/ SING/ CONT/ PROG, The PROG mode presets 5 locations for automated trial processes with multiple locations and multiple trips
  3. USB Direct connection computer: with official FGT-VC special software (free download on the official network), power to collect and draw curves in sync with the migration data to support automatic trigger and bottom determination after the application of the assigned weight
  4. Four-digit array LCD: Display speed, distance and number of repeats, which can be set at 0 ~ 9999 to facilitate long-lasting test counting
  5. Security fully designed: Emergency shutdown, upper and lower limit blocks, and power source AC plug-in, which is directly disabled by the signal
  6. 150 x 200 mm Large table: fit for larger and heavier samples and special treatments

Applied trade & test object

Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, bending, etc. The damage and the glue-strength test is used to impose a stable, consistent payload. Develops validation and control tables. The platform itself is the loading agency with the power values read out by the series of NIDEC-SHIMPO FGP/ FGPX/FGJN

About the Product Images on This Page

NIDEC Officially placed FGS-100VC under the same product entry as FGS-250VC and shared the same official product photograph (the difference is in the way they look, in the type and capacity, speed, The image on this page is the official original of the purpose of the item, which is standardized and watered with a white bottom, without replacing the name of the crown, and the model difference is as shown in the specification table on this page

FAQ

Q: FGS-100VC and FGS-250VC

A: Selected according to the maximum test strength required. FGS-100VC measured load 1000 N (100 kg), mass approximately 63 kg; FGS-250VC measured charge weight 2500 N (250 kg), mass approximately 65 kg. The two processes are 400 mm,, and XX. The test stand is 150 x 200 mm and the speed is 10 ~ 400 mm/min

Q: Can you get the data directly into the computer?!?

A: Yes. The platform has a USB interface, which is accompanied by a dedicated official FGT-VC communication software (free download by the official network) that will synchronize the load with the movement data into the computer and draw a curve; Software supports the trigger function (starting to take numbers after reaching the set weight), setting number of consecutive takeouts and determining the upper and lower limits. Randomly attach a USB line._Back

Q: The platform contains a non-calculator?

A: Does not include. This aircraft is a loading agency with a force value read out by the monitor. Official labels can install FGP-0.2 — 50, 100 connected to FGPX-0.2 — 50, 100, randomly attached line. X , 100 X-X-X-X-X-X-X-X-X-X-X-X-X-X

Q: What is the threshold of detectability?

A: Officially marked to detect 2 N — 2500 N (0.2 kg — 250 kg, for example). Actual detectable ceilings depend on the rated capacity of the instrument(s) installed, For example, the maximum for loading FGPX-100 is 1000 N. Reference: FGS-250VC

Q: Is the product picture the official original?

A: NIDEC Officially placed FGS-100VC under the same product entry and shared the same official product photograph (both look identical, the difference is in the sign type and capacity, speed, speed, etc.) The image on this page is the official original of the purpose of the item, which is standardized and watered with a white bottom, without replacing the name of the crown, and the model difference is as shown in the specification table on this page._._._._._. Reference: FGS-250VC

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

NIDEC-SHIMPO FGS-5000TV Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-5000TV Force & Material Testing

FGS-5000TV
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-TV Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-TV Force & Material Testing

FGS-TV
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-50L Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-50L Force & Material Testing

FGS-50L
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-5S Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-5S Force & Material Testing

FGS-5S
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-50H Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-50H Force & Material Testing

FGS-50H
└ SHIMPO Test Stands
NIDEC-SHIMPO FGS-250VC Force & Material Testing
Force & Material Testing

NIDEC-SHIMPO FGS-250VC Force & Material Testing

FGS-250VC
└ SHIMPO Test Stands