NIDEC-SHIMPO TNX-2+DSP-10 Torque Testers (Model TNX-2+DSP-10) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO TNX-2+DSP-10 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: NIDEC-SHIMPO | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | TNX-2+DSP-10 |
|---|---|
| Welding Systems | Height Functions Digital Torque Instrument TNX-2 + Motorised Torque pcs Stand DSP-10(two requires Division Order) |
| Rated Torque | 2N·m |
| Measuring Range | 0.000~±2.000N·m(0~±200.0N·cm) |
| Measuring Unit | N·m / N·cm |
| Display Resolution | 0.001N·m / 0.1N·cm |
| Accuracy | ±0.5% F.S.(Full Scale) |
| Rotatable Speed | 0.1~25.0rpm |
| Rotatable Direction | Open (CCW) or (CW) optional |
| Angle measuring range | 0°~1440° |
| Angle Resolution | 0.1° |
| Data Output Period | Approx. 10/20/50/100 times / s (optional) |
| Overload Protection | Detection to Overload Automatic |
| Clamping Range | Caliper Disk φ10~φ100mm |
| Shaft Speed | 10~600mm / min(Shift Range by above Lower Limit Limit digits Open Setting) |
| Shaft Maximum Stroke | 400mm |
| Test Mode | PP Test / Angle Test / Torque Test / Test / Test / Sample Test |
| Standard Software | TNT_DSP(Setting Rotational Speed and Angle, Guide Torque ‑ Angle Data, Control Torque ‑ Angle / Torque ‑ Time Wire) |
| Accessories | USB Data Cable, Power Cable etc. |
| Power Supply | AC100V |
| Dimensions | Width 324 × Depth 577 × Height 900(Maximum)mm |
| Total Mass | Approx. 43kg(TNX Main unit and DSP-10 pcs Stand Meter) |
| Notes | TNX Torque Instrument and DSP-10 pcs Stand requires Division Order; Product image is Type Capacity Combination total Use Official Unit Type Appearance Diagram |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Automation of tweeding/closed tangle tests for beverages, food (HACCP/GMP counterpart), cosmetics, medicine, etc., for various container caps; also available for electric gear cavities, gear head tweaking, The lens is focused/focal rings torque, the cell cap is turned on and torque is stunned, the screw is stunned, and the precise torque evaluation and destructive verification is done
This page is a picture of the official product of NIDEC..! TNX-0. 5+DSP-10/TNX-2+DSP-10/TNX-5+ZQ6/TNX-10+DSP-10 4 capacity combination shared 4 X/DSP-10-CTP4 X X/ he same type of skin,! Only one map was officially provided, so the four model pages used the same picture; the picture was printed with a “Guangzhou Yunke Electronics Co., Ltd.” watermark. Reference: DSP-10. Reference values: 0.5.
Q: What is the difference between TNX-2+DSP-10 and the separate TNX-2?
A: TNX-2 is a desktop digital torque, and DSP-10 is a dedicated electric torque support; the combination of the two is then automatically tested by the server at a set speed and angle, eliminating the measurement deviation caused by manual operation. Quest Quasi-Trance The TNX mainframe and the DSP-10 stand are ordered separately. Reference: PP
Q: How much work can be tested?
A: Card-set holding range 100, maximum lift-axis process 400mm, which is suitable for most bottle containers and small rotation components. Reference: 100mm. Reference values: 10.
Q: How are test data exported and analysed?!
A: Connect computers through USB, marked TNT_DSP software can set test speeds and angles, import torque and angle data, and show torque tangles and torque trangles for determination and traceability.A
Q: Is the product picture the official original?
A: Yes. This is an official map of the NIDEC product.! TNX-0. 5/2/5/10 and DSP-10 have the same machine-type look in four combinations of capacity, X The four models therefore use the same official map; the picture has been added to the “Guangzhou Yunke Electronics Co., Ltd.” watermark for the product display only. Reference values: 0.5.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.