Home › Products

Product Overview

NIDEC-SHIMPO TNX-5+DSP-10 Torque Testers (Model TNX-5+DSP-10) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO TNX-5+DSP-10 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: NIDEC-SHIMPO | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

NIDEC-SHIMPO TNX-5+DSP-10 Torque Testers

Technical Specifications

ModelTNX-5+DSP-10
Welding SystemsHeight Functions Digital Torque Instrument TNX-5 + Motorised Torque pcs Stand DSP-10(two requires Division Order)
Rated Torque5N·m
Measuring Range0.000~±5.000N·m(0~±500.0N·cm)
Measuring UnitN·m / N·cm
Display Resolution0.001N·m / 0.1N·cm
Accuracy±0.5% F.S.(Full Scale)
Rotatable Speed0.1~25.0rpm
Rotatable DirectionOpen (CCW) or (CW) optional
Angle measuring range0°~1440°
Angle Resolution0.1°
Data Output PeriodApprox. 10/20/50/100 times / s (optional)
Overload ProtectionDetection to Overload Automatic
Clamping RangeCaliper Disk φ10~φ100mm
Shaft Speed10~600mm / min(Shift Range by above Lower Limit Limit digits Open Setting)
Shaft Maximum Stroke400mm
Test ModePP Test / Angle Test / Torque Test / Test / Test / Sample Test
Standard SoftwareTNT_DSP(Setting Rotational Speed and Angle, Guide Torque ‑ Angle Data, Control Torque ‑ Angle / Torque ‑ Time Wire)
AccessoriesUSB Data Cable, Power Cable etc.
Power SupplyAC100V
DimensionsWidth 324 × Depth 577 × Height 900(Maximum)mm
Total MassApprox. 43kg(TNX Main unit and DSP-10 pcs Stand Meter)
NotesTNX Torque Instrument and DSP-10 pcs Stand requires Division Order; Product image is Type Capacity Combination total Use Official Unit Type Appearance Diagram

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Key Advantages

  1. Server power drive, measuring torque at constant rotation speeds and angles, eliminating measurement deviations from manual twitching, higher data repetition, and achieving higher levels of testing and management
  2. Six test models: angle/tangle test/back-to-back test/PP test/sampling/destruct test, over which research and development is validated to produce line tests
  3. TNT_DSP: The conditions for test speed, angle, etc., import torque and angle data and draw torque & torque & torque & torque & time curves
  4. TNX High-Full Number Toxler supports the opening of the tactile /2app/3rd 3 peaks record,s3rdZp3P3S3P3S3S3S3S3S3S3S3S3S3S3S3S3 1000 data storage and USB memory (TNX host function)Spunners. Reference: 1
  5. Axes 10 ~ 600mm/min tuned, maximum process 400mm, card-set range ~ 100mm, suitable for various bottles and small parts 100mm. Reference: 10

Applied trade & test sample

Automation of tweeding/closed tangle tests for beverages, food (HACCP/GMP counterpart), cosmetics, medicine, etc., for various container caps; also available for electric gear cavities, gear head tweaking, The lens is focused/focal rings torque, the cell cap is turned on and torque is stunned, the screw is stunned, and the precise torque evaluation and destructive verification is done

About the Product Images on This Page

This page is a picture of the official product of NIDEC..! TNX-0. 5+DSP-10/TNX-2+DSP-10/TNX-5+ZQ6/TNX-10+DSP-10 4 capacity combination shared 4 X/DSP-10-CTP4 X X/ he same type of skin,! Only one map was officially provided, so the four model pages used the same picture; the picture was printed with a “Guangzhou Yunke Electronics Co., Ltd.” watermark. Reference: DSP-10. Reference values: 0.5.

FAQ

Q: What is the difference between TNX-5+DSP-10 and the separate TNX-5?

A: TNX-5 is a desktop digital torque, and DSP-10 is a dedicated electric torque support; the combination of the two is then automatically tested by the server at a set speed and angle, eliminating the measurement deviation caused by manual operation. Quest Quasi-Trance The TNX mainframe and the DSP-10 stand are ordered separately. Reference: PP

Q: How much work can be tested?

A: Card-set holding range 100, maximum lift-axis process 400mm, which is suitable for most bottle containers and small rotation components. Reference: 100mm. Reference values: 10.

Q: How are test data exported and analysed?!

A: Connect computers through USB, marked TNT_DSP software can set test speeds and angles, import torque and angle data, and show torque tangles and torque trangles for determination and traceability.A

Q: Is the product picture the official original?

A: Yes. This is an official map of the NIDEC product.! TNX-0. 5/2/5/10 and DSP-10 have the same machine-type look in four combinations of capacity, X The four models therefore use the same official map; the picture has been added to the “Guangzhou Yunke Electronics Co., Ltd.” watermark for the product display only. Reference values: 0.5.

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

NIDEC-SHIMPO TNX-10+DSP-10 Torque Testers
Torque Testers

NIDEC-SHIMPO TNX-10+DSP-10 Torque Testers

TNX-10+DSP-10
└ SHIMPO (Japan)
NIDEC-SHIMPO TNX-2+DSP-10 Torque Testers
Torque Testers

NIDEC-SHIMPO TNX-2+DSP-10 Torque Testers

TNX-2+DSP-10
└ SHIMPO (Japan)
NIDEC-SHIMPO TNX-0.5+DSP-10 Torque Testers
Torque Testers

NIDEC-SHIMPO TNX-0.5+DSP-10 Torque Testers

TNX-0.5+DSP-10
└ SHIMPO (Japan)
SHIMPO TNX-10 Torque Testers
Torque Testers

SHIMPO TNX-10 Torque Testers

TNX-10
└ SHIMPO (Japan)
SHIMPO TNX-5 Torque Testers
Torque Testers

SHIMPO TNX-5 Torque Testers

TNX-5
└ SHIMPO (Japan)
SHIMPO TNX-2 Torque Testers
Torque Testers

SHIMPO TNX-2 Torque Testers

TNX-2
└ SHIMPO (Japan)