FLUKE 368 / CN (Model 368 / CN) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. FLUKE 368 / CN — FLUKE · Yunke Electronics. Request a quotation and datasheet.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Measuring Functions | AC Current |
|---|---|
| AC Current Range | 3 mA、30 mA、300 mA、3 A、30 A、60 A |
| Range Selection | mA / A: Manual Selection / 3 mA / 30 mA / 300 mA: Automatic Selection / 3 A / 30 A / 60 A: Automatic Selection |
| Range / Resolution | 3 mA¹ / 0.001 mA / 30 mA / 0.01 mA / 300 mA / 0.1 mA / 3 A / 0.001 A / 30 A / 0.01 A / 60 A / 0.1 A |
| Accuracy – Filtering Device (40 to 70 Hz), Filtering Device (40 to 1 kHz)² | 3 mA – 30 A / 60 A / 1% + 5 digits / 2% + 5 digits |
| Frequency | 40 Hz to 1 kHz |
| Peak Series Number | ="3" |
| Display (LCD) | Number digits Reading: 3300 digits |
| Display More Rate | 4 times / s |
| Maximum Can Measure Test Lead Diameter | 40 mm |
| Dimensions | 234 x 101 x 46 mm |
| Weight | 500 g |
| Battery | 2 AA, IEC LR6, NEDA 15A, Alkaline |
| Battery Life | at not Operating Backlight Lamp and Light Lamp under, Meter Battery Life can by Over Over 150 hours |
| Auto Power-off | Clamp Gauge will at 15 minutes No Operation Rear Auto Power-off |
| Safety | IEC 61010-1: Pollution Degree 2 |
| Measuring Safety | IEC 61010-2-032:CAT III 600 V / CAT IV 300 V |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -40°C to +60°C |
| Operating Humidity | non-condensing (<10°C) / 90% Relative Humidity (10°C to 30°C) / 75% Relative Humidity (30°C to 40°C) / 45% Relative Humidity (40°C to 50°C) |
| IP Rating | IEC 60529: IP30(Clamp Port ) |
| Operating Altitude | 2000 m |
| Storage Altitude | 12000 m |
| Current Sensor Category | IEC 61557-13: 2 Class, ≤30 A / m |
| IEC 61326-1 | Electromagnetic Environment |
| CISPR 11 | No. 1 groups B Class |
| No. 1 Set | Device internal Part requires Origin and / or Operating and Guide Energy Quantity Phase RF Energy Quantity, to Device internal Part Functions not can . |
| B Class | Device Applicable at Use Electric Device and Direct Connection to is Power Supply Low Voltage Device. This Device and Test Connection when, can Energy Over Over CISPR 11 in Gauge Setting Emission class. / (KCC): Device Type ( Wireless Electric and Communication Device) |
| A Class | This Product Full Electromagnetic Device , Sales or Operating Notes. This Device Meter Use at Environment, and Non- Environment. / USA (FCC): 47 CFR 15 B Part Division. According to 15.103 Part Division Gauge Setting, This Product can by is Device. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Reduction of downtime - Find electrical currents without having to remove equipment from the production line Fluke 368 FC. effective flash-blank table to help users detect, archive, and record continuous detection effective Recording and comparing current leaks to prevent unplanned downtime and timely detection of the intermittent jumps of GFCI and RCD, all of which did not require the removal of equipment from the production line. Fluke 368 FC with a large plier diameter of 40 mm, which can be used in conjunction with a large guidance line. The plier clamp is completely shielded and can capture very weak leak signals accurately. It also minimizes external electromagnetic interference. 368 FC can also connect wireless data via Flukeby._._. As part of the large software system in the industry - Fluke, the government has been working on the issue of the use of software. 368 FC, which has a multi-wire test tool, allows you to track the current changes continuously, thus helping to identify potential failures and avoid serious failures due to minor problems. * 368 has the same electrical performance and measurement functions as 368 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =. Reference: 40
Communication/direct currents are measured by means of a clamp, suitable for distribution patrol and duct measurements; in the selection, attention is given to the flow range, the diameter of the clamp, bandwidth and real-effect capability
Q: FLUKE Fluke 368/ CCN plier table / What can be done primarily?
A: FLUKE Fluke 368/ CN plier table is a plier-form product of FLUKE Fluke. XOX. X. Cp XX QS. Q. XS The main functions listed officially include: a true value measurement that ensures accuracy in complex, non-sine wave-form measurements; 40 mm clamp-opening; and a maximum resolution of 1 mA, which is the most important of the applications for the use of the data.Screech_Screaks_Screech_Trescres_Trescs_Trescs_Trescs_Trescs_Scene_Sc The minimum range is lower than 3mA (the maximum measured current is 60 A). the measurement object and the process requirements, if required by the working conditions selected, are confirmed with cloud help
Q: What are the key technical indicators for 368/ CN?
A: The list of parameters for this page has been compiled by official information and has a total of 29 items covering electrical technology indicators/calculations, with accuracy valid for one year.A.A.Sc.Sc.Screts.SSSSS The accuracy is (% reading + digits) reference temperature conditions are 23 5 °C and the maximum relative humidity is 80 per cent. / 1 minimum value 10 μA valid value / / 2 over TC/ °C 18 °C to 28 °C, For more detailed information on accuracy and environmental conditions, please refer to the official manual, which is not open on this page. + 1/Safety/environmental norms. Reference: 0.02
Q: How can the selection and the cargo date be confirmed?!
A: Guangzhou Yunke Electronics Co., Ltd. supplies a full range of FLUKE Fluke products, which can provide selective advice, technical information and post-sale support. Please provide a specific model, quantity and usage profile, which will be confirmed with the assistance of staff
Q: What is the object of the FLUKE Fluke 368/ CN plier? What are the scenes?
A: This product is a clamp-form (FLUKE Fluke/ clamp-sheet). Communication/direct currents are used to detect and measure electrical traffic; the type is selected with attention to the flow range, the diameter of the clamp, the diameter of the plier. Bandwidth versus real value capability.!
Q: How can technical support be obtained after purchase?!
A: Products with official instructions and quality assurance services; Guangzhou Yunke Electronics Co., Ltd. provides pre-sale selection and post-sale coordination services, which can be submitted through site contact, supported by staff assistance to connect to the original plant
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.