FLUKE 369 / CN Leakage Current Clamp Meter (Model 369 / CN) is a FLUKE supplied by Guangzhou Yunke Electronics Co., Ltd. Fluke 369 / CN true-RMS leakage current clamp meter, 61 mm jaw, 1 μA resolution, 3 mA to 60 A ranges, CAT III 600 V.
Brand: FLUKE | Category: FLUKE
Sales Inquiries: 15626018696 · 78403603@qq.com

| Measuring Functions | AC Current |
|---|---|
| AC Current Range | 3 mA、30 mA、300 mA、3 A、30 A、60 A |
| Range Selection | mA / A: Manual Selection / 3 mA / 30 mA / 300 mA: Automatic Selection / 3 A / 30 A / 60 A: Automatic Selection |
| Range / Resolution | 3 mA¹ / 0.001 mA / 30 mA / 0.01 mA / 300 mA / 0.1 mA / 3 A / 0.001 A / 30 A / 0.01 A / 60 A / 0.1 A |
| Accuracy – Filtering Device (40 to 70 Hz), Filtering Device (40 to 1 kHz)² | 3 mA – 30 A / 60 A / 1% + 5 digits / 2% + 5 digits |
| Frequency | 40 Hz to 1 kHz |
| Peak Series Number | ="3" |
| Display (LCD) | Number digits Reading: 3300 digits |
| Display More Rate | 4 times / s |
| Maximum Can Measure Test Lead Diameter | 61 mm |
| Dimensions | 257 x 116 x 46 mm |
| Weight | 600 g |
| Battery | 2 AA, IEC LR6, NEDA 15A, Alkaline |
| Battery Life | at not Operating Backlight Lamp and Light Lamp under, Meter Battery Life can by Over Over 150 hours |
| Auto Power-off | Clamp Gauge will at 15 minutes No Operation Rear Auto Power-off |
| Safety | IEC 61010-1: Pollution Degree 2 |
| Measuring Safety | IEC 61010-2-032:CAT III 600 V / CAT IV 300 V |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -40°C to +60°C |
| Operating Humidity | non-condensing (<10°C) / 90% Relative Humidity (10°C to 30°C) / 75% Relative Humidity (30°C to 40°C) / 45% Relative Humidity (40°C to 50°C) |
| IP Rating | IEC 60529: IP30(Clamp Port ) |
| Operating Altitude | 2000 m |
| Storage Altitude | 12000 m |
| Current Sensor Category | IEC 61557-13: 1 Class, ≤100 A / m |
| IEC 61326-1 | Electromagnetic Environment |
| CISPR 11 | No. 1 groups B Class |
| No. 1 Set | Device internal Part requires Origin and / or Operating and Guide Energy Quantity Phase RF Energy Quantity, to Device internal Part Functions not can . |
| B Class | Device Applicable at Use Electric Device and Direct Connection to is Power Supply Low Voltage Device. This Device and Test Connection when, can Energy Over Over CISPR 11 in Gauge Setting Emission class. / (KCC): A Class Device ( and Communication Device) |
| A Class | This Product Full Electromagnetic Device , Sales or Operating Notes. This Device Meter Use at Environment, and Non- Environment. / USA (FCC): 47 CFR 15 B Part Division. per No. 15.103 records Gauge Setting, This Product by is Device. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The Fluke 369 / CN is a true-RMS leakage-current clamp meter for AC current measurement. True-RMS measurement preserves accuracy on complex, non-sinusoidal waveforms. The 61 mm jaw opening accepts very large conductors, and the fully shielded clamp captures extremely weak leakage signals while minimising external electromagnetic interference. Resolution reaches 1 μA, the lowest range is 3 mA and the maximum measurable current is 60 A.
The official product literature describes the Fluke 369 FC variant, which can continuously detect, archive, record and compare leakage-current readings without removing equipment from the production line — helping prevent unplanned downtime and trace intermittent GFCI and RCD tripping. The 369 FC also connects wirelessly through Fluke Connect®, part of a system of more than 40 wireless test tools, and adds a forward-facing LED work light for dark cabinets. Note on model scope: apart from the FC and its related functions, the 369 has the same electrical performance and measuring functions as the 369 FC; the features tied to Fluke Connect® apply to the FC version.
AC current ranges 3 mA, 30 mA, 300 mA, 3 A, 30 A and 60 A; resolution 0.001 mA / 0.01 mA / 0.1 mA / 0.001 A / 0.01 A / 0.1 A respectively; accuracy 1% + 5 digits (3 mA – 30 A) and 2% + 5 digits (60 A) with the filter active; frequency 40 Hz to 1 kHz; crest factor 3; 3300-count LCD updated 4 times per second; maximum conductor diameter 61 mm; dimensions 257 × 116 × 46 mm; weight 600 g; 2 × AA alkaline batteries (IEC LR6, NEDA 15A) with an expected life over 150 hours without backlight or work light. Operating temperature -10 °C to +50 °C, storage -40 °C to +60 °C; protection IEC 60529 IP30 (jaw closed); operating altitude 2000 m, storage altitude 12000 m; current sensor category IEC 61557-13 class 1, ≤100 A / m; IEC 61326-1 industrial electromagnetic environment; CISPR 11 group 1 class B, with KCC class A (Korea) and FCC 47 CFR part 15 B notes as published by the manufacturer.
Clamp meters measure AC / DC current without breaking the circuit, which suits distribution inspections and live measurements. When selecting, check the current range, jaw diameter, bandwidth and true-RMS capability. Typical industries are electrical installation and maintenance, distribution system inspection, industrial equipment service, HVAC repair, and renewable-energy and photovoltaic maintenance.
What does it measure? AC leakage current, with the official main features listed above. Send us the measurement object and range requirement and we can confirm the model for your working conditions.
Where do the specifications come from? The specification table above contains 29 items compiled from official Fluke documentation. Accuracy is valid for one year after calibration, expressed as ±(% of reading + digits) at a reference temperature of 23 ± 5 °C and maximum relative humidity of 80%; the minimum true-RMS value is 10 μA. Footnotes on temperature coefficient (18 °C to 28 °C, 0.02 + 1) and on safety and environmental standards are published in the official manual; this page does not reproduce every condition.
How do I confirm selection, lead time and support? Yunke Electronics supplies the full Fluke range. Please provide the model, quantity and working conditions; our staff will confirm selection, documentation and after-sales coordination with the manufacturer. The instrument is supplied with the official manual and warranty service.
All figures are transcribed from the official Fluke specification sheet without conversion or inferred values; where the official revision differs, the original manual takes precedence. This is a quotation-only catalogue; no prices are listed.
For a quotation, lead time or an English datasheet, please contact our engineers.