Home › Products

Product Overview

KANON 1200SPK Torque Testers (Model 1200SPK) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. KANON 1200SPK Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: KANON | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

KANON 1200SPK Torque Testers

Technical Specifications

Model1200SPK
BrandKANON(KANON / NAKAMURA MFG. Co., Ltd.)
CategoryPosition Type Torque Wrench
Range (kgf·cm / kgf·m)240~1200
Range (N·m)24~120
Wrench Port Dimensions W17 / 19 / 22 / 24 / 26 / 27 / 29 / 30 / 32 / 36 / 41
Overall length390 mm
Head Dimensions (mm)32.8×11.3
Weight0.75 kg
Accuracy±3%(Set Value)
OriginJapan
Calibration BasisISO 6789-1 / ISO 6789-2
Supply NotesGuangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

KANON (Cooked by KANON/ NAKAMURA MFG. Co., (f) 1200 SPK is a section in the SPK series, Pre-set torque wreary. The official specification table gives the appropriate bolt/nex side width by the W(mm) size of the wrench, with the same type covering multiple openings

SPK Model 1 View

The following table shows the mass and weight of all SPK models in the SPK series, which allows for the selection of the actual hard torque type._. Reference: 10

ModelRange (kgf·cm / kgf·m)Weight
30SPK5~300.1 kg
80SPK15~800.11 kg
190SPK35~1900.15 kg
380SPK80~3800.29 kg
670SPK130~6700.45 kg
1200SPK240~12000.75 kg
1600SPK300~16000.94 kg
2200SPK450~22001.1 kg
3100SPK650~31001.3 kg
4200SPK900~42001.45 kg

Key Advantages

  1. Torque preset, reach the set value and jump and make a sound to prevent excessive tightness
  2. Single function type, suitable for the same torque-fixing of the line of production
  3. No validation of set values required, efficient operations%%
  4. ++3% for precision to set value%%

Applied trade & test object

(a) Automobiles and parts assembly - engine, transmission box, torque and torque of the bottom plate bolts; 3C electronic and precision assembly - cellular phones, laptop computers, small torque of video modules, tight; — — — — — — — — — — torque and — — to the bottom plate — — — to the engine, — to the engine, the transmission, — to the bottom, the torque, the (a) Household and white household electricity - air conditioners compressors, washing machines, refrigerator assembly torque management; engineering machinery and heavy works - large-scale bolts, wheels, screws'high torque hardening; — Aeronautical and orbital traffic - recheck and record of key connecting to torque; medical instruments and instruments - assembly and exit inspection of microtrangles

FAQ

Q: What is the accuracy of 1200 SPK? Q: What is the accuracy of 1200?SQQQQ

A: This model is 3 per cent (set value) and the measurements are stable and reliable within the recommended range. (set

Q: Is there any other measure in this series?!

A: Yes. Pre-set series has 10 models, and X-rays. The process covers 5~30 to 900~4200, which is selected in a tight torque size; for a complete comparison see the " Series I " table on this page

Q: Where does KANON (KANON) belong? Q: What brand is this?s

A: KANON is the brand of the torque tool of the Japanese factory KANON (NAKAMURA MFG. Co., ff.), which was created in the year 1938, which is the first to be created by the Japanese company 1938. The main battalion has a manual twister, a torque, a torque test instrument and a torque device, and has production and sales outlets both inside Japan and abroad.!

Q: Is this product imported in Japanese original? Q

A: The KANON product listed at this station is the prototype of the Japanese factory KANON, which is produced in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd., with randomly attached inspection reports; please specify at the time of submission if a third party calibration certificate is required

Q: Can you open a calibration certificate or do an annual calibration?!

A: Yes. The KANON full-system tortile tool can produce calibration data, and the station provides a check-and-annual calibration service based on ISO 6789-1/ISO 6789-2

Q: How should the wrench choose the measure?!

A: 20%~100%% area recommended to use torque to land in tool process (partly numbered with 10%~100%) The least error measurement margin when the torque approach the maximum quantum range and the tool lifetime is the longest; the working conditions below the mass 20 per cent suggest a smaller process model

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

KANON 2000GCK Torque Testers
Torque Testers

KANON 2000GCK Torque Testers

2000GCK
└ KANON Torque Wrenches
KANON 1400GCK Torque Testers
Torque Testers

KANON 1400GCK Torque Testers

1400GCK
└ KANON Torque Wrenches
KANON 1000GCK Torque Testers
Torque Testers

KANON 1000GCK Torque Testers

1000GCK
└ KANON Torque Wrenches
KANON 500GCK Torque Testers
Torque Testers

KANON 500GCK Torque Testers

500GCK
└ KANON Torque Wrenches
KANON 250GCK Torque Testers
Torque Testers

KANON 250GCK Torque Testers

250GCK
└ KANON Torque Wrenches
KANON 120GCK Torque Testers
Torque Testers

KANON 120GCK Torque Testers

120GCK
└ KANON Torque Wrenches