Home › Products

Product Overview

KANON 1000SPCKH Torque Testers (Model 1000SPCKH) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. KANON 1000SPCKH Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: KANON | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

KANON 1000SPCKH Torque Testers

Technical Specifications

Model1000SPCKH
BrandKANON(KANON / NAKAMURA MFG. Co., Ltd.)
CategoryPosition Type Interchangeable Head Torque Wrench
Range (kgf·cm / kgf·m)200~1000
Range (N·m)20~100
Interchangeable Head100(QCK,SCK,RCK,HCK)
Overall length312 mm
Head Dimensions (mm)15×65×18
Body Dimensions (mm)27.5×12.4×37
Weight0.62 kg
Accuracy±3%(Set Value)
OriginJapan
Calibration BasisISO 6789-1 / ISO 6789-2
Supply NotesGuangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

KANON (Cooked by KANON/ NAKAMURA MFG. Co., (f) 1000 SPCKH is a section in the SPCK series, Pre-set, capable of being taken to the first session of the Committee. The retweet (QCK ratchet wheel / SCK / RCK ring / HCK head) is to be selected at a tight spot and not all head types are randomly included.Stamp / RCK ring / HCKStightStampStSSSt

SPCK Model 1 View

The following table shows the mass and weight of all SPCK models in the SPCK series, which allows for the selection of the actual hard torque type._. Reference: 13

ModelRange (kgf·cm / kgf·m)Weight
60SPCK20~600.15 kg
120SPCK40~1200.19 kg
250SPCK50~2500.27 kg
500SPCK100~5000.57 kg
1000SPCK200~10000.92 kg
2000SPCK400~20001.7 kg
2800SPCK600~28002.6 kg
4400SPCK600~44002.6 kg
60SPCKH20~600.17 kg
120SPCKH40~1200.21 kg
250SPCKH50~2500.3 kg
500SPCKH100~5000.62 kg
1000SPCKH200~10000.62 kg

Key Advantages

  1. The switch will be able to adapt to multiple hardened parts of the ring, the thorn wheel, the opening, the inner hexagon
  2. Strangle value preset, reach set value decoupling.%%
  3. SPCK as standard handle, SPCKH as rubber handle (60~1000)
  4. ++3% for precision to set value%%

Applied trade & test object

(a) Automobiles and parts assembly - engine, transmission box, torque and torque of the bottom plate bolts; 3C electronic and precision assembly - cellular phones, laptop computers, small torque of video modules, tight; — — — — — — — — — — torque and — — to the bottom plate — — — to the engine, — to the engine, the transmission, — to the bottom, the torque, the (a) Household and white household electricity - air conditioners compressors, washing machines, refrigerator assembly torque management; engineering machinery and heavy works - large-scale bolts, wheels, screws'high torque hardening; — Aeronautical and orbital traffic - recheck and record of key connecting to torque; medical instruments and instruments - assembly and exit inspection of microtrangles

FAQ

Q: What is the accuracy of 1000 SPCKH? Q: What is the accuracy of 1000?SQQQQ

A: This model is 3 per cent (set value) and the measurements are stable and reliable within the recommended range. (set

Q: Is there any other measure in this series?!

A: Yes. Pre-set, able to be a tool for the development of a series of 13 models, and X-rays. The process covers 20~60 to 200~1000, which is selected in a tight torque size; for a complete comparison see the " Series I " table on this page

Q: Where does KANON (KANON) belong? Q: What brand is this?s

A: KANON is the brand of the torque tool of the Japanese factory KANON (NAKAMURA MFG. Co., ff.), which was created in the year 1938, which is the first to be created by the Japanese company 1938. The main battalion has a manual twister, a torque, a torque test instrument and a torque device, and has production and sales outlets both inside Japan and abroad.!

Q: Is this product imported in Japanese original? Q

A: The KANON product listed at this station is the prototype of the Japanese factory KANON, which is produced in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd., with randomly attached inspection reports; please specify at the time of submission if a third party calibration certificate is required

Q: Can you open a calibration certificate or do an annual calibration?!

A: Yes. The KANON full-system tortile tool can produce calibration data, and the station provides a check-and-annual calibration service based on ISO 6789-1/ISO 6789-2

Q: How should the wrench choose the measure?!

A: 20%~100%% area recommended to use torque to land in tool process (partly numbered with 10%~100%) The least error measurement margin when the torque approach the maximum quantum range and the tool lifetime is the longest; the working conditions below the mass 20 per cent suggest a smaller process model

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

KANON 2000GCK Torque Testers
Torque Testers

KANON 2000GCK Torque Testers

2000GCK
└ KANON Torque Wrenches
KANON 1400GCK Torque Testers
Torque Testers

KANON 1400GCK Torque Testers

1400GCK
└ KANON Torque Wrenches
KANON 1000GCK Torque Testers
Torque Testers

KANON 1000GCK Torque Testers

1000GCK
└ KANON Torque Wrenches
KANON 500GCK Torque Testers
Torque Testers

KANON 500GCK Torque Testers

500GCK
└ KANON Torque Wrenches
KANON 250GCK Torque Testers
Torque Testers

KANON 250GCK Torque Testers

250GCK
└ KANON Torque Wrenches
KANON 120GCK Torque Testers
Torque Testers

KANON 120GCK Torque Testers

120GCK
└ KANON Torque Wrenches