Home › Products

Product Overview

KANON KDTA-8DH Torque Testers (Model KDTA-8DH) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. KANON KDTA-8DH Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: KANON | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

KANON KDTA-8DH Torque Testers

Technical Specifications

ModelKDTA-8DH
BrandKANON(KANON / NAKAMURA MFG. Co., Ltd.)
CategoryDigital Torque Testers(Torque Screwdriver Use · Micro Small Torque)
Range / Display Range3~800 mN·m
Conversion Range0.03~8 kgf·cm
Minimum Reading (Increment)0.1 mN·m
Dimensions (Mm)230×123×65
Weight1.8 kg
Accuracy±0.5% F.S. ±1 digit
OriginJapan
Calibration BasisISO 6789-1 / ISO 6789-2
Supply NotesGuangzhou Yunke Electronics Co., Ltd. Item For , can Open Calibration Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

KANON (Standing from KANON) KDTA-8DH is a piece in the KDTA-DH series, which is a piece of the "Standard" series.Standing the "Standard" series.ssssStampsss of the Internet, and also the "Standards" are a piece in the series of KDTA-DHs.s of the Internet, and the Internet torqueñers for torqueeth. Smaller volume (mN.m./ cN.m.) than the KDTA-D series Check for small torque starters. Measurement mode: RUN in real time / Peak01 Peak to Peak01 Peak._. Reference: NAKAMURA, MFG

KDTA-DH Model 1 View

The following table shows the mass and weight of all 2 models in the KDTA-DH series, which allows for the selection of the actual hard torque type

ModelProcess / Display RangeWeight
KDTA-8DH3~800 mN·m1.8 kg
KDTA-80DH3~800 cN·m1.8 kg

Key Advantages

  1. Torque check for electric/air lift and manual torque%
  2. Micro-tangled segment overlays both 800 mN mm/ 800 cN mStightsStand
  3. RUN (real time)/ Peak01 (peak maintenance)/ Peak to Peak01 (peak to summit maintenance)
  4. Internal charger cells, which can be used on site without external power supply
  5. Precision 0.5%F.S. 1

Applied trade & test object

(a) Automobiles and parts assembly - engine, transmission box, torque and torque of the bottom plate bolts; 3C electronic and precision assembly - cellular phones, laptop computers, small torque of video modules, tight; — — — — — — — — — — torque and — — to the bottom plate — — — to the engine, — to the engine, the transmission, — to the bottom, the torque, the (a) Household and white household electricity - air conditioners compressors, washing machines, refrigerator assembly torque management; engineering machinery and heavy works - large-scale bolts, wheels, screws'high torque hardening; — Aeronautical and orbital traffic - recheck and record of key connecting to torque; medical instruments and instruments - assembly and exit inspection of microtrangles

FAQ

Q: What is the accuracy of KDTA-8DH?

A: This model is 0.5% F.S. 1 §, with stable measurements within recommended use range. ZX

Q: Is there any other measure in this series?!

A: Yes. Ddittal torqueñers for torquetis series of 2 models, The process covers 3~800 mN.m to 3~800 cN.m. The process is selected in the size of the tight torque; for a complete comparison, see the " Series One " table on this page._Serious _Text_Stamps_Standard_File_File_Standard_TypesStight_Stands

Q: Where does KANON (KANON) belong? Q: What brand is this?s

A: KANON is the brand of the torque tool of the Japanese factory KANON (NAKAMURA MFG. Co., ff.), which was created in the year 1938, which is the first to be created by the Japanese company 1938. The main battalion has a manual twister, a torque, a torque test instrument and a torque device, and has production and sales outlets both inside Japan and abroad.!

Q: Is this product imported in Japanese original? Q

A: The KANON product listed at this station is the prototype of the Japanese factory KANON, which is produced in Japan and supplied by Guangzhou Yunke Electronics Co., Ltd., with randomly attached inspection reports; please specify at the time of submission if a third party calibration certificate is required

Q: Can you open a calibration certificate or do an annual calibration?!

A: Yes. The KANON full-system tortile tool can produce calibration data, and the station provides a check-and-annual calibration service based on ISO 6789-1/ISO 6789-2

Q: How should the wrench choose the measure?!

A: 20%~100%% area recommended to use torque to land in tool process (partly numbered with 10%~100%) The least error measurement margin when the torque approach the maximum quantum range and the tool lifetime is the longest; the working conditions below the mass 20 per cent suggest a smaller process model

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

KANON KDTA-N1000GTH-UC Torque Testers
Torque Testers

KANON KDTA-N1000GTH-UC Torque Testers

KDTA-N1000GTH-UC
└ KANON
KANON KDTA-N600GTH-UC Torque Testers
Torque Testers

KANON KDTA-N600GTH-UC Torque Testers

KDTA-N600GTH-UC
└ KANON
KANON KDTA-N300GTH-UC Torque Testers
Torque Testers

KANON KDTA-N300GTH-UC Torque Testers

KDTA-N300GTH-UC
└ KANON
KANON KDTA-N200GTH-UC Torque Testers
Torque Testers

KANON KDTA-N200GTH-UC Torque Testers

KDTA-N200GTH-UC
└ KANON
KANON KDTA-N100GTH-UC Torque Testers
Torque Testers

KANON KDTA-N100GTH-UC Torque Testers

KDTA-N100GTH-UC
└ KANON
KANON KDTA-N20GTH-UC Torque Testers
Torque Testers

KANON KDTA-N20GTH-UC Torque Testers

KDTA-N20GTH-UC
└ KANON