Home › Products

Product Overview

Mitutoyo 543-855B-DC Measuring Tools (Model 543-855B-DC) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 543-855B-DC Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.

Brand: Mitutoyo | Category: Mitutoyo Measuring Tools

Sales Inquiries: 15626018696 · 78403603@qq.com

Mitutoyo 543-855B-DC Measuring Tools

Technical Specifications

Order No.543-855B-DC
Series ModelsID-F0512NXB
SeriesMitutoyo 543 Series ID-FNX Height Performance ABSOLUTE Digital Indicators(supports Digimatic S1 Dual toward Communication)
Product TypeDigital Indicators(Height Performance Type, External Power Supply)
Measuring Range12.7 mm
Resolution0.0005 mm(0.5 μm)
Resolution Switching0.0005 / 0.001 / 0.01 mm three levels
Part Division Range Indication Error P MPE0.0025 mm
Full Range Indication Error E MPE0.0025 mm
Hysteresis Error H MPE0.002 mm
Repeatability R MPE0.002 mm
Measuring Force MPL1.5 N or less
Measuring DirectionFull Direction (to Measure Rod Horizontal Direction is )
Position Detection MethodABSOLUTE Electric Capacitance Type to Linearity Device
Rear TypeFlat Rear
Clamping Sleeve Diameterø8 mm
Installation Part ThreadM2.5×0.45
Contact PointHardness Surface Contact Point ø3 mm, Order No. No.901312(standard)
Display7 digits LCD(incl. No.)+ Analog Scale , with 2 Backlight Lamp (GO / ±NG )
Maximum Response SpeedNo Limit
IP RatingIP40(No Waterproof Protection)
Measuring FunctionsPeak Hold (MAX / MIN), Width degrees (MAX-MIN), Position Zero (INC), Preset (ABS), Counting Direction Rotation Replace, Tolerance Judgment, Resolution Switching, Meter Calculation f(x)=Ax, Analog Graduation Switching, Data Hold, Functions , Calibration Time Warning, Data Output, Display Part Rotatable 330°, Error Warning
Data outputDigimatic d1(6 digits), d2(8 digits) Output; Digimatic S1 Dual toward Communication
Power SupplyExternal Power Supply (AC Adapter 5.9 V, 2 A)No.06AGZ369DC(Standard Accessories), No built-in Battery
Operating TemperatureOperating Temperature 0 ℃~40 ℃; Storage Temperature -10 ℃~60 ℃
MassApprox. 170 g
Standard accessoriesAC Adapter No.06AGZ369DC, Hardness Surface Contact Point No.901312, Inspection Certificate

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Mitutoyo series . Reference: Mitutoyo, 543ID-FNXIt's from the ABSOLUTE digital indicator tableHigh Performance Type0.5 μm resolution, colour backlights, simulation tcbar, supported for the first time on the table of instructionsPirimat S1 two-way serial communicationThis paragraph543-855B-DC(ID-F0512NXB)Volume 12.7 mm, flat back cover, full-scale error 0.0025 mm, with a measurement 1.5 N below

ID-F is not the same as the usual battery power supply. It uses external power supply in exchange for a bright 2 color backlight with larger LCD: qualified to show green, The difference shows red, and you can see the result from a look at the table, without having to read the numbers. and you can see the balance of the current value range up and down, in conjunction with the simulation tic bar


543 Series ID-F cross-reference of whole-system specifications (total 5)

Order No.Series ModelsMeasuring rangeResolutionE MPEForce MeasurementBack coverMass
543-855-DCID-F0512NX12.7 mm0.0005 mm0.0025 mmAfter 1.5 NCharliePut your ear back on180 g
543-855B-DCID-F0512NXB12.7 mm0.0005 mm0.0025 mmAfter 1.5 NCharlieFlat back cover%170 g
543-851DCID-F0525NX25.4 mm0.0005 mm0.004 mmAfter 1.8 NCharlieFlat back cover%240 g
543-853DCID-F0550NX50.8 mm0.0005 mm0.004 mmAfter 2.3 NCharlieFlat back cover%330 g
543-857DCID-F0550HNX50.8 mm0.0005 mm0.003 mmAfter 2.3 NCharlieFlat back cover%330 g

Specifications: 0.0005 mm 0.01 mm 50.8 mm 0.003 mm 20 1 0.0005 0.001 543 857 MPE DC. Please contact our engineers for the full technical wording.

III. Key Product Advantages

IV. Industries and Typical Applications

V. FAQ

Q: Why do ID-F have to connect to the power source, not to load the battery?
A: ID-F is located on-line measurements and continuous collection over a long period of time. It is often light coloured backsliding, with analog twarts and two-way S1 communications, with far more power than normal numbers, and with batteries it cannot sustain continuous operations. So Mitutoyo directly provides external power (tagged with AC adapter 5.9 V/ 2 A). The advantage is that you do not need to change batteries, and do not fear low electricity to cause reading anomalies; The cost is that there must be a plug or a power source.!

Q: What can 0.5 μm demagogic measures?
A: A suitable area for mass matching, calibration of the test equipment, thickness of the precise parts to step, and thickness of the thin material, which requires sub-micro-mimemeter readings. Note that the resolution is not equal to accuracy: the full-scale error in this paragraph is 0.0025 mm. Actual credibility is measured by this indicator, 0.0005 mm, which shows the smallest step of the screen

Q: What is the fitting of the flat back cap?!??
A: Back level, fixed by a ø8 mm kit and suitable for space-constrained inspection, clamp or table rack. ear-plugs are selected for back-hear cover when the back screw is needed (goods without B)

Q: What can a two-way communication do?. Reference: S1
A: S1 is a Mitutoyo Third Generation Kiiman protocol, which supports two-way serial communications. The USB connection line and USB-ITPAK V3.0 software are used to support communications.ScreechScreaksStamps SSS You can also copy a table set to multiple tables for multiple-space management. If you only pick data without setting, should be able to use the data. Output with normal d1/d2 plus USB-ITN is sufficient. Reference: PC

Q: Protection level only for IP40. Can you get on the bedside?
A: IP40 only protects against solids above 1 mm in diameter and waterproofs.Technology, oil fog,.Stamps,. The dust-rich environment must be protected or selected as a dust-proofing type (e.g. IP53 in the ID-S series). ID-F has an advantage in accuracy and communication, not in environmental durability. .SSS

Source of specifications: Mitutoyo Consolidated Commodity Catalogue 2025-2026 Page 07-3,. High performance ABS numerical indicator table ID-C/ID-F sample (No. C12049),ScreaksS ID-F uses instructions (No. 99 MAH 054A ). Mitutoyo retains the right to change specifications, depending on random documents from the plant. XQ reserve the right to change specifications, depending on the random documents from the site. Reference: 2

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

Mitutoyo 543-857DC Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 543-857DC Measuring Tools

543-857DC
└ Digital Indicators
Mitutoyo 543-853DC Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 543-853DC Measuring Tools

543-853DC
└ Digital Indicators
Mitutoyo 543-851DC Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 543-851DC Measuring Tools

543-851DC
└ Digital Indicators
Mitutoyo 543-855-DC Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 543-855-DC Measuring Tools

543-855-DC
└ Digital Indicators
Mitutoyo 543-794B-10 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 543-794B-10 Measuring Tools

543-794B-10
└ Digital Indicators
Mitutoyo 543-794-10 Measuring Tools
Mitutoyo Measuring Tools

Mitutoyo 543-794-10 Measuring Tools

543-794-10
└ Digital Indicators