Mitutoyo 547-212A Measuring Tools (Model 547-212A) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 547-212A Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Mitutoyo | Category: Mitutoyo Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Order No. | 547-212A |
|---|---|
| Series | Mitutoyo 547 Series ABSOLUTE Digital Depth Indicators(Digimatic Depth Gage) |
| Product Type | Digital Depth Indicators(with Gauge Depth Scale / Indicator Type Depth Scale) |
| Measuring Range | 0-200 mm(with 5 pcs Extension Rod Extension) |
| Indicator Stroke | 12.7 mm |
| Resolution | 0.01 mm |
| Maximum Permissible Error | ±20 μm(not Package Quantisation Error ±1) |
| Measuring Force | 1.5 N or less |
| Base Size W | 101.6 mm |
| Base Size T | 16 mm |
| Base Flatness | 5 μm |
| Contact Point | with Hardness Contact Point No.21JAA224(standard) |
| Extension Rod | 5 pcs (10, 20, 30, 30, 100 mm) |
| Matching Indicator | Depth Indicator Use 543-710B(ID-C1012NXB) |
| Display | Digital + LCD Analog records (can Tolerance, Pressure Quantity etc. Micro ) |
| Position Detection Method | ABSOLUTE Electric Capacitance Type to Device (Open Unit No requires points digits) |
| Data output | Digimatic Output Port, can Connection Statistics Over Range Control (SPC) and Measurement Data Welding Systems |
| Main Functions | Peak Hold (Maximum / Minimum), Width degrees Measurement, INC Position Zero, ABS Preset, Counting Direction Switching, Tolerance Judgment, Meter Calculation f(x)=Ax, Functions , Calibration Day Warning, Automatic Electric, Displayed Value Hold, Display Part 330° Rotatable, Low Electric Quantity and Error Warning |
| Operating Notes | Extension Rod Total Length Over Over 110 mm when Energy toward Operating (Contact Point under); Installed Extension Rod Rear Use Standard Gauge (such as Quantity ) Position Zero |
| Specification Source | Mitutoyo Product Catalogue 2025-2026 No. 06-15 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Mitutoyo547 Seriesis a ABSOLUTE numerical depth indicator table, which replaces the pointer estimation with the number of first readings of the tab, and a simulator on LCD, which can see straight through the small changes in the headlines, the volume of input547-212A0.01 mm, Discriminating 0.01 mm, 20 μm, base 101.6 mm x 16 mm, plane 5 μm,Screaks16 mm, plane 5 μmsss Scresss of the 0.01 mm The accompanying depth table is used in 543-710B (ID-C1012NXB)
What needs to be clarified is the "0-200 mm" process: the top of the table itself is the only one that can get a job12.7 mm0-200 mm is a marked 5 root pole (10, 20, 30, 30, , 30, 30, X-X-X-X-X-X-X-X-X-X-X-X-X-X-X- The 100 mm sub-paragraph is expanded. The 101.6 mm broad base is larger in length, less prone to tilt and more stable reading across narrow slots and steps. The base is hard and carefully studied and is aligned to the workframe. The pole is inserted vertically into the hole or bottom of the sink to read directly; the ABSOLUTE absolute encoder remembers the position of the original point and the switch off does not have to be re-set to zero
The position of 547-212A compared to the other three paragraphs in the series is thatSpunnersWide Base + 0.01 mm.Split +Spew +Split0.01 mm file value error 20 μm, base level 5 μm, for General Gorge Depth, Steak and Pressure Enter; 101.6 mm base greater range, Better anti-slant; resolution and base width combines 547-211A / 212A / 251A / 252A four cargo numbers, /S / 251A / 252A The configuration is selected in a precise sequence and then in a base size.!
| Order No. | Resolution | Indication Error | Base W | Base T | Flat_Face_File__File_Face_Face_File_F | Table of instructions | Force Measurement |
|---|---|---|---|---|---|---|---|
| 547-211A | 0.01mm | ±20 μm | 63.5 mm | 16 mm | 5 μm | 543-710B | After 1.5 NCharlie |
| 547-212A | 0.01mm | ±20 μm | 101.6 mm | 16 mm | 5 μm | 543-710B | After 1.5 NCharlie |
| 547-251A | 0.0005mm | ±5 μm | 63.5 mm | 16 mm | 2 μm | 543-700B | After 1.5 NCharlie |
| 547-252A | 0.0005mm | ±5 μm | 101.6 mm | 16 mm | 2 μm | 543-700B | After 1.5 NCharlie |
Note: The indicative error does not include the quantitative error 1; the four paragraphs measure range, process, gauge, base T, header and long pole configuration. Sights, Sights, Geometers, T-T, and T-SwissSpins
Q: Is the range of measurements for 547-212A read at once by 0-200 mm?
A: No. The schedule is dated 12.7 mm, 0-200 mm by tagging 5 root poles (10, 20, 30,, 30, 20, ZX X The length of the poles is increased by 30, 100 mm; the change of the poles requires a standard rule (e.g. blocks) to be replaced with zero..Stamps of the poles are only vertically used when the length exceeds 110 mm
Q: 547-212A and 547-212A/ 251A/ 252A Q: Q: Q: Q: Q - and / 251A / 252A Q? Q: Q: Q
A: This paragraph is a value error for 0.01 mm, base W=101.6 mm. 0.01 mm (211A/ 212A) 20 μm, 20 plane 5 μm; 0.0005 mm (251A/ 252A) display error 5 μm, The plane 2 μm supports the diffraction switch. The suffix 211A/ 251A is the base of 63.5 mm,, and the stint is the base of the 63.5 mm.s for the XQuestion.s the XQSStrates the Q the base 212A/ 252A is a 101.6 mm wide base. The location is by two distances between the exact and the work
Q: Can you connect to a computer or SPC system? Q: Can
Specifications: U-WAVE 06 15 PC USB. Please contact our engineers for the full technical wording.
Q: Can the header be changed?
A: A header with a rigid alloyed sphere. No. Z. JAA 224. The replacement of different sizes will alter the movement of the base of the head relative to the base of the base and the range of measurements may change; The heading diameter is not installed when greater than the base aperture; the change plane / needle header is adjusted to parallel with the base floor, and such needs are treated as special orders.?.Screakssssss.s. Reference: 21
Source of specifications: Mitutoyo Commodity Catalogue 2025-2026 Page 06-15,. The blog is a blog of the blog of the Global Voices Online Network for Human Rights (CC BY-NC-ND 2.0).. The product is shown in the same series of physical photographs of the official catalogue of Mitutoyo, which is used to identify the most important items in the series. The base width is based on the technical parameters of this page. Mitutoyo reserves the right to change the specification, whichever is the case. Reference: Mitutoyo, E2025, 06, 19, 547, ABSOLUTE
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.