Home › Products

Product Overview

NIDEC-SHIMPO TNP-5 Cap Torque Tester (Model TNP-5) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO TNP-5 bench digital cap torque tester, 0-5.00 N.m, +/-0.5% FS, opening and closing peak capture, USB data upload.

Brand: SHIMPO | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

NIDEC-SHIMPO TNP-5 Cap Torque Tester

Technical Specifications

ModelTNP-5
Measuring Range0~5.00N·m(0~500N·cm / 0~50.99kg·cm / 0~44.25lb-in)
Accuracy±0.5% Full Scale (FS)

Product Description

The NIDEC-SHIMPO TNP-5 is a bench-top digital torque tester built specifically for cap torque. It measures both the opening (loosening) torque and the closing (tightening) torque of screw caps, with independent peak capture in the clockwise and counter-clockwise directions, so the maximum value of each action is recorded separately. It is a standard quality-control instrument in beverage, food, pharmaceutical, daily-chemical and cosmetics packaging lines.

The measuring range is 0–5.00 N·m (0–500 N·cm / 0–50.99 kgf·cm / 0–44.25 lb-in) with an accuracy of ±0.5% of full scale. High-speed sampling captures the brief torque spike at the instant a cap breaks loose, and the unit switches freely between measuring units. Readings can be stored in the instrument and uploaded to a computer over USB for production QC reports.

Key Features

Typical Applications

Food and beverage, pharmaceutical packaging, household chemicals and cosmetics. Typical samples are plastic caps, glass jar lids, tube closures and cosmetic caps, tested for both opening / loosening torque and closing / tightening torque.

Model Selection & Reference Figures

Choose between the TNP-2 and the TNP-5 by the torque you actually measure: the TNP-2 (2 N·m) suits small pharmaceutical bottles and sample-size cosmetic caps, while the TNP-5 (5 N·m) suits beverage bottles and large sauce jars. As a rule, keep routine readings inside 20%–80% of full scale for the best accuracy. A standard clamping-pin set is supplied and can hold round samples of 10–190 mm; the TNP-2 and TNP-5 share the same fixture design.

Frequently Asked Questions

Q: Should I order the TNP-2 or the TNP-5?
A: Match the range to the cap. The TNP-2 covers 2 N·m for small vials and cosmetic sample caps; the TNP-5 covers 5 N·m for drinks and large food jars. Keep the expected torque in the 20%–80% band of full scale.

Q: Is a fixture included?
A: Yes. A clamping-pin assembly is supplied as standard and holds round samples of 10–190 mm.

Service & Support

Guangzhou Yunke Electronic Co., Ltd. supplies the NIDEC-SHIMPO TNP range with selection advice, quotations, demonstrations and after-sales support, and can arrange factory calibration certificates and spare fixtures on request.

Specification Sources

Values above are transcribed from the official NIDEC-SHIMPO TNP series datasheet; no values have been converted or rewritten. This is a quotation-only catalogue and no prices are listed.

For a quotation, lead time, a demonstration or an English datasheet, please contact our engineers.

Related Products

NIDEC-SHIMPO TNX-10+DSP-10 Torque Testers
Torque Testers

NIDEC-SHIMPO TNX-10+DSP-10 Torque Testers

TNX-10+DSP-10
└ SHIMPO (Japan)
NIDEC-SHIMPO TNX-5+DSP-10 Torque Testers
Torque Testers

NIDEC-SHIMPO TNX-5+DSP-10 Torque Testers

TNX-5+DSP-10
└ SHIMPO (Japan)
NIDEC-SHIMPO TNX-2+DSP-10 Torque Testers
Torque Testers

NIDEC-SHIMPO TNX-2+DSP-10 Torque Testers

TNX-2+DSP-10
└ SHIMPO (Japan)
NIDEC-SHIMPO TNX-0.5+DSP-10 Torque Testers
Torque Testers

NIDEC-SHIMPO TNX-0.5+DSP-10 Torque Testers

TNX-0.5+DSP-10
└ SHIMPO (Japan)
SHIMPO TNX-10 Torque Testers
Torque Testers

SHIMPO TNX-10 Torque Testers

TNX-10
└ SHIMPO (Japan)
SHIMPO TNX-5 Torque Testers
Torque Testers

SHIMPO TNX-5 Torque Testers

TNX-5
└ SHIMPO (Japan)