Home › Products

Product Overview

ALGOL IT-20 Torque Testers (Model IT-20) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. ALGOL IT-20 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: ALGOL | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

ALGOL IT-20 Torque Testers

Technical Specifications

ModelIT-20
SeriesALGOL IT Series Torque Calibration Instrument (JapanALGOL ALGOL)
Maximum Torque20 N·m
Measurement Range0.2 ~ 20 N·m(200.0 kgf·cm)
Minimum Resolution0.01 N·m(F.S. 20.00)
Degree1/2000
Unit SwitchingN · m, kgf · cm, lbf · in three Type Unit switchable
Accuracy±0.5% F.S.
Load200% F.S., with with Overload (O.L.) Protection Device
A / D16 bit
Sampling Rate640 / s
Than Device FunctionsAccording to above, Lower Limit Setting, by LED and Buzzer Judgment Output
Maximum Memory Data511 groups
Output SignalRS-232C(requires Dedicated Connection Wire HOP-RS), Mitutoyo Series Gauge Unit (HOP-FC Connection Wire), CENTRONICS(requires Dedicated Interface HOP-CE / HOP-FC)
Continuous operating timeApprox. 16 hours (Fully charged when, Operating Temperature 25℃)
Charging timeApprox. 12 hours
Supply VoltageNiMH Battery, Pressure Device Charging Use Power Supply
Operating ConditionsTemperature 10℃ ~ 40℃, Humidity 85%RH or less (not can Condensation)
DimensionsBody 150D × 230W × 60H mm; incl. Fixed Use Knob and Output Part 180D × 230W × 72H mm
WeightApprox. 3300 g
NotesMeasuring Range by Official Text Version ±0.2 ~ ±20 N · m is Standard (and 0.01 N · m Minimum Resolution ); Official Body Version 0.02 N · m, Difference , under Single Front and Sales Accuracy .

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description


Comparison of the IT series, three-stage specificationsCharlie

ModelMaximum torqueMeasuring RangeMinimum decomposition energy%2Resolution._Other Organiser_Other Organiser
IT-55 N·m0.02 ~ 5 N·m(50.00 kgf·cm)0.001 N·m1/5000
IT-2020 N·m0.2 ~ 20 N·m(200.0 kgf·cm)0.01 N·m1/2000
IT-5050 N·m0.2 ~ 50 N·m(500.00 kgf·cm)0.01 N·m1/5000

Key Advantages

  1. High-precision torque sensors: using high unit prices of que2.32, good repeat accuracy, long life, less damage due to over-incarnation, long-term use can still maintain measurement consistency
  2. The resolution of the maximum 1/5000: IT-5 and IT-50 has a resolution of 1/5000, which can distinguish very minor changes in the twisting segment. XCCymmetrical XVCs: X XX XCystems of the maximum X Twisted settings suitable for small electrical batches and precision screws
  3. Up and down limits: A cap and a floor can be set for output by LOW/ OK/ HIGH in third file LED light in conjunction with the beeper, The line of production does not require reading to determine eligibility.!
  4. Three units are switched: N.m., kgf.cm., lbf.in. The solar system corresponds to the designation units of the Euro-American tool, thus exempting manual conversion
  5. Three data outputs: a computer or a list machine for Mitutoyo for statistical analysis, and a parallel output for CENTRONICS to facilitate access to established measurement systems._. Reference: RS-232C
  6. 511 group data memory: The value of the 511 group measurements can be stored directly on the machine, the site-based data can be stored and transmitted before, reducing time-time and recording errors
  7. Direct flow dual-use: NMMH cells are charged with electricity and can be used for approximately continuous 16 hours, as well as for long periods of time by a transformer, and are subject to both point and field operations
  8. Overload protection: Allowable load 200% F.S. with a loaded (O.L.) anti-intensity device, which occasionally overloads without immediate damage to the sensor

Applied trade & test object

The typical test subjects include the tow set and point check of electric (bar) starters, the tow wrench and the tow starter.Stight set and point check. The caps and containers open to twist measurements, switches and spin buttons for operation torque tests, etc.. can be used for routine pointing of the production line, or for regular correction of the torque tool in the metering room or the product security sector

FAQ

Q: What about the three slots in the IT series?

A: Select between the quantum of 20% ~ 80%, by the nominal torque of the measure tool.,..,..,., Twilight and point toggle settings for the little tox screwdriver to check IT-5 (0.02-5 N·m); conventional batch tox set, The caps open the torque measurements IT-20 (0.2-20 N·m); the larger torque selection IT-50 (0.2-50 N·m) is required. The three tranches are fully aligned except for the difference in the amount of the decomposition

Q: What is the difference between the IT series and the usual thin-swipe torque machine?

A: The IT series uses high accuracy, high unit value torque twitch sensors (Torque ion twig ) with good repeat accuracy, long life and no easy to overload damage; Many products on the market use thin-banded power sensors, to convert tots values by the multiplier of the force-arm conductor, low unit prices but with more uncertainty, high correction error and high risk of overload damage. —

Q: What are the objects that this instrument can measure?!?

A: In cases where "control only the torque, the torque angle" is used: torque and point the electric (bar) lift, torque wrench and torque daily check and correction, bottle caps to turn on the torque measurements, etc.A: torque and correct the torque of the torque, etc. to the torque, and then to the torque, to the torque of the torque, to the torque, to the torque It is a common configuration for the tow management and measurement room

Q: What's the top and bottom limit for?!??

A: The instrument may set a ceiling and a floor, respectively, and the measurements are determined by the output determined by the bee-beep with the LED light number on the panel (LOW / OK / HIGH tri-symposing instruction). / HIGH / HIGH The line operator can quickly determine eligibility without reading it.!?

Q: How do test data output and do statistics? Q

A: instrument provision of RS-232C interface (with dedicated connection HOP-RS) to the Mitutoyo (Mitutoyo) listwriter for statistical analysis (with HOP-FC connection); XX X-X-X-X-X-X-X-X There are also CENTRONICS parallel output (with a dedicated interface HOP-CE/ HOP-FC). The maximum memory of the 511 group measurements is available on the machine

Q: Battery Relay and Power?

A: NMMH batteries in storage, filled with electricity, which can be used continuously for approximately 16 hours (25°C) and charged for approximately 12 hours; or directly powered by transformers, It is suitable for use on site and can be brought to work on site.!

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

ALGOL IT-50 Torque Testers
Torque Testers

ALGOL IT-50 Torque Testers

IT-50
└ ALGOL (Japan)
ALGOL IT-5 Torque Testers
Torque Testers

ALGOL IT-5 Torque Testers

IT-5
└ ALGOL (Japan)
TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver

STC500CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC500CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G Digital Torque Screwdriver

STC500CN3-G
└ TOHNICHI (Japan)
TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver

STC200CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC200CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC200CN3-G Digital Torque Screwdriver

STC200CN3-G
└ TOHNICHI (Japan)