Mitutoyo 543-730B Measuring Tools (Model 543-730B) is a Mitutoyo Measuring Tools supplied by Guangzhou Yunke Electronics Co., Ltd. Mitutoyo 543-730B Measuring Tools — Mitutoyo Measuring Tools · Yunke Electronics. Request a quotation and datasheet.
Brand: Mitutoyo | Category: Mitutoyo Measuring Tools
Sales Inquiries: 15626018696 · 78403603@qq.com

| Order No. | 543-730B |
|---|---|
| Series Models | ID-C0550NXB |
| Series | Mitutoyo 543 Series ID-CNX Digital Indicators(Standard Type) |
| Product Type | Digital Indicators( Division Gauge Type, Resolution 0.0005 / 0.001 / 0.01 mm(switchable)) |
| Measuring Range | 50.8 mm |
| Resolution | 0.0005 / 0.001 / 0.01 mm(switchable) |
| Maximum Permissible Error E MPE | ±0.005 mm |
| Hysteresis H MPE / Repeatability R MPE | 0.002 mm / 0.002 mm |
| Measuring Force | 2.3 N or less |
| Display | 7 Range LCD, digits Height 11.0 mm, with ±20 Scale Analog records |
| Display Rotatable | 330° |
| Position Detection Method | Electric Capacitance Type ABSOLUTE Direct Wire Device |
| Response Speed | No Limit ( Measurement except external) |
| Data Output Interface | Digimatic d1 / S1 |
| Clamping Sleeve Diameter | ø8 mm(ISO / JIS Type) |
| Contact Point | Hardness Contact Point, Installation Part Thread M2.5 × 0.45(ISO / JIS Type) |
| Back Cover Type | Flat back cover (Flat back) |
| Dust / Water IP Rating | Equivalent at IP42(IEC 60529, requires Installed Good Output Interface Protection ) |
| Power Supply / Battery Life | Battery CR2032 × 1; Normal Operating Approx. 2.5 years, Continuous Operating Approx. 2700 hours |
| Operating Temperature / Storage Temperature | 0 ~ 40 ℃ / −10 ~ 60 ℃ |
| Alarm Display | each Type Setting Error, Sensor Normal, Display Output, Low Voltage |
| Total Mass | Approx. 260 g |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Mitutoyo Mitutoyo 543 series ID-CNX (ABSOLUTEgbinikal ID-C) It's MitutoyoNew generation standard-type indicator tablewhich replaces the previous generation of ID-C series (e.g. 543-390B/543-400B, which has been discontinued)543-730B(ID-C0550NXB)Measurement range 50.8 mm, differential 0.0005/ 0.001/0.01 mm (toggleable), maximum permissible error (EZQ11) 0.005 mm,ScreenScreak Stampsssssss of the MPE is the highest precision in the 543 series: 0.5 µm with the resolution power of ABSOLUTE with the absolute static capacitator encoder, which starts with the absolute position of the pole relative to the original point, without re-doing zero, . Large-sized liquid crystal screen words with simulators 11.0 mm are visible at first glance when approaching the original or the public boundary; three big buttons customize the usual function, and the screen is rotated at 330°. All cross-slants can find a pro-hand view. This model is also loaded beyond the traditional d1/ d2 one-way outputPirimat S1 two-way serial communicationin addition to collecting measurements, the original, batch configuration parameters and the tool serial number can be set remotely by PC end, with calibration date alerts, and the time management of the mass is no longer dependent on paper-based desktops
| Order No. | Series Models | Measuring range | Resolution | Maximum permissible error EMPE_Backgrounds_Backgrounds | Force Measurement | Mass |
|---|---|---|---|---|---|---|
| 543-700 | ID-C0512NX | 12.7 mm | 0.0005 / 0.001 / 0.01 mm (switchable)StightStampStightSt | ±0.003 mm | After 1.5 NCharlie | 175 g |
| 543-700B | ID-C0512NXB | 12.7 mm | 0.0005 / 0.001 / 0.01 mm (switchable)StightStampStightSt | ±0.003 mm | After 1.5 NCharlie | 165 g |
| 543-705 | ID-C0512CNX | 12.7 mm | 0.0005 / 0.001 / 0.01 mm (switchable)StightStampStightSt | ±0.003 mm | 0.7 / 0.6 / 0.4 N | 170 g |
| 543-705B | ID-C0512CNXB | 12.7 mm | 0.0005 / 0.001 / 0.01 mm (switchable)StightStampStightSt | ±0.003 mm | 0.7 / 0.6 / 0.4 N | 160 g |
| 543-720B | ID-C0525NXB | 25.4 mm | 0.0005 / 0.001 / 0.01 mm (switchable)StightStampStightSt | ±0.005 mm | After 1.8 NCharlie | 195 g |
| 543-730B | ID-C0550NXB | 50.8 mm | 0.0005 / 0.001 / 0.01 mm (switchable)StightStampStightSt | ±0.005 mm | After 2.3 NCharlie | 260 g |
| 543-710 | ID-C1012NX | 12.7 mm | 0.01 mm | ±0.02 mm | After 0.9 NCharlie | 170 g |
| 543-710B | ID-C1012NXB | 12.7 mm | 0.01 mm | ±0.02 mm | After 0.9 NCharlie | 160 g |
| 543-715 | ID-C1012CNX | 12.7 mm | 0.01 mm | ±0.02 mm | 0.5 / 0.4 / 0.3 / 0.2 N below | 165 g |
| 543-715B | ID-C1012CNXB | 12.7 mm | 0.01 mm | ±0.02 mm | 0.5 / 0.4 / 0.3 / 0.2 N below | 155 g |
| 543-725B | ID-C1025NXB | 25.4 mm | 0.01 mm | ±0.02 mm | After 1.8 NCharlie | 190 g |
| 543-735B | ID-C1050NXB | 50.8 mm | 0.01 mm | ±0.04 mm | After 2.3 NCharlie | 245 g |
The above list is a new paragraph in the 543 seriesPublicThe same range provides the same setup as the flat backhead (barrel B) and the same measurement performance; The low-caliber type (543-705 / 705 XB / 715 / 715 XQB) reduces the force by replacing springs and adding heavy blocks, / 705 / 715 / 715 QB Fits to soft and mutated worksPublic/English 24 cargo number(543-701 ~ 543-737 series) Shows the switching between mm and inch, of which M is assigned to ISO / JIS mechanical interface (8 mm cylinder, M2.5 header thread) E afterfixed to ASME / ANSI / AGD mechanical interface (3/8 ',SpSSSSSSS #4-48 UNF headprints, matching the existing staircases and head attachments when selecting. Reference: 0.45
Q: New paragraph 543 series (ID-CNX) and previous generation ID-C (e.g. 543-390B/ 543-400B) XQXXQZZZXB ZXB XZXZ XB XZ X ♪ And I'm gonna be ♪
A: Mitutoyo has been updated with the numerical indicator form 543 series ID-C: the old ID-C is discontinued and the new item number is unified to 543-7.StampsStancess of the seriesSt.Stratections of the X The main change is four points: 1 minimum resolution from 0.001 mm to444444%244%24444440.0005 mm2 display to large-sized circular LCD and tagming simulators;3 add to the original d1/ d2S1 double-directional serial communicationwhich can be set zero and configuration parameters at PC; 4 Add a calibration date tip with serial number to be read and easily measureable. The mechanical specification is compatible with the installed dimensions..Screech_Technology_Technology_Fox.Scope_Technology.SS
Q: How does the separation 0.0005 / 0.001 / 0.01 mm use the third file?
A: Three-stage switching of the 1,000-minute watch type (of this type in this section): conventional matching 0.001 mm; to 0.0005 mm when the exact value is matched or the reading is stabilized to sub-μm; Only the gross position or the mechanical scale readings are cut to 0.01 mm, with fewer readings. The percentage watch type is fixed to 0.01 mm, which cannot be changed..ScreechsScene Note that the maximum permissible error of the 12.7 mm quantum resolution 0.0005 mm is 0.003 mm and the resolution is not equal to accuracy
Q: What about the Q-shirts with ears and the Q-shirts? Q
A: The measurements are identical, with only the difference in the way the back cap is installedPut your ear back on(e.g., 543-700) with ear-mounted belts that can be directly placed on the staircase or the testerFlat Recap%1%2The tablet is either in a puncture or on a dedicated positioning plate (e.g. 543-700B) and is a plane. The folder is selected in the form of a clamp, and the new set is recommended to confirm the support interface
Q: What is the appropriate occasion for the low-caliber type (543-705 / 543-715 etc.)? Q: What is the appropriate occasion for the low-caliber type ( & )?
A: When the work is a thin film, sheet, plastic piece, rubber piece or a very delicate piece of deformed parts, the normal work pressure is reduced by a small reading. — The low-caliber type can reduce the force to 0.7/0.6/ 0.4 N (thousands of minutes) or 0.5/ 0.4/ by replacing the standard attachment spring and weight mass XE/0.6 / 0.4 N (thousands of minutes) 0.3 / 0.2 N (percentage chart) / / 0.2 N / The specific available measurements are related to the direction of the pole and are configured in combination with the instructions.!
Q: What are the options for a public and a public/British model?
A: Pure commons (543-700 series) only show X; public/British (543-701 series) can be switched between mm and inch, Two more mechanical interfaces are available within the common/English typeM afterfixed to ISO / JISSecret_screw_scancerSpSpSpS(Packing of 8 mm, head-trace x 0.45). Reference: M2.5E afterfixed to ASME / ANSI / AGDSecSecret_Secure_Secure(Toolet 3/8', head-trace #4-48 UNF) matching the existing staircase and head-tock attachments when selecting the model
Q: Can you get a computer for data collection?
A: Yes. The 12.7 mm-track d1/ d2 / S1 interface, 25.4 mm and 50.8 mm with d1/ S1. A single-direction collection of SPC cables or USBOLUTO series with data switches is sufficient; To use S1 for two-way communication (PC end zero, batch configuration parameters, read sequence number) you need to have a dedicated connection line and install USB-ITPAK V3.0 software._ A wireless sender can also be used for U-WAVE-TM/TMB, but two-way communication is not supported when walking for U-WAVE._. Reference: USB-ITN
Q: What is the protection of IP42? Q: What is the protection of ZX
A: By IEC 60529, level 4 means to prevent intrusion of solids above 1 mm in diameter, level 2 means droplets in vertical direction, The level is "sprayproof" and not waterproof. It is suitable for the general workshop environment, but cannot be soaked and used for long periods by a machine bed with a cut-off fluid. The cable is connected to a reduced protection capability
Q: What's the battery for? How long?
A: Use of lithium metal batteries CR2032 one (randomly attached 1 for action confirmation). Normal use of approximately 2.5 years, continuous use of approximately 2700 hours. Real life is associated with frequency of use, regularity of drive and external access, and timely replacement of low voltage icons on screens is sufficient.!
Q: What are the limits to the direction of the installation of the poles?
A: The 12.7 mm quantum model can be measured in any direction; the 25.4 mm and 50.8 mm quantum model only supports the direction of the head down to the pole level, so that the header is used upwards, A different help rod spring (selection) is required. The direction of the low-calculation type is related to the measurement slotting, and is combined with a description
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.