NIDEC-SHIMPO FGS-50E-H Force & Material Testing (Model FGS-50E-H) is a Force & Material Testing supplied by Guangzhou Yunke Electronics Co., Ltd. NIDEC-SHIMPO FGS-50E-H Force & Material Testing — Force & Material Testing · Yunke Electronics. Request a quotation and datasheet.
Brand: NIDEC-SHIMPO | Category: Force & Material Testing
Sales Inquiries: 15626018696 · 78403603@qq.com

| Model | FGS-50E-H |
|---|---|
| Series | FGS-50E Series Length Stroke Motorised Measuring Force Instrument Test pcs Stand (NIDEC-SHIMPO New ) |
| Category | Measuring Force Instrument pcs Stand / Load Test units (Motorised) |
| Brand / Origin | NIDEC-SHIMPO( New , Japan New SHIMPO) |
| Drive Method | Motorised (Height Specifications) |
| Meter Measure Load | 500 N |
| Load | 500 N |
| Speed | 20 ~ 600 mm/min |
| Speed Setting | Operation Surface Plate Setting |
| Stroke | 400 mm |
| Display Part | LCD 3 digits, Display Shift Speed and Mode |
| Mode | Manual (MANU) / (JOG) / Single Ring (SIG) / (CON) |
| Overload Input | Connection FGPX(FGP) Overload Signal and |
| Measurement Unit | 93 × 150 mm |
| Operating Temperature Range | 0 ~ 45 ℃(non-condensing) |
| Power Supply | AC100 V ~ AC230 V ±10% |
| Mass | Approx. 20 kg |
| Dimensions | Width 220 × Depth 358 × Height 680 mm(Official Catalogue per 220×680×358 mm ) |
| Can Installation Measuring Force Instrument | FGJN-2 ~ 50 / FGP-0.2 ~ 50 / FGPX-0.2 ~ 50 |
| Supplied Accessories | Connection Wire 1 pcs, Power Cable 1 pcs, Wire Clamp 1 pcs, internal six Angle (M4×8 Measuring Force Instrument Installation Use 4 pcs, M6×12 Fixture Installation Use 2 pcs), six Angle Wrench M6 Use 1 pcs and M4 Use 1 pcs |
| Product image | Official Product Diagram (FGS-50E-L and FGS-50E-H is Same a Official records , Official total Use Same a Diagram) |
| Notes | Official in Text will Input Power Supply AC100 ~ 240V Width Voltage; This Gauge by Official Day Text Catalogue AC100V ~ AC230V ±10% is Standard. Unit units is plus Unit , Force Value by optional Measuring Force Instrument Reading Output. |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Applies to samples of electronic components, connectors and beams, key and switch, springs, rubber and plastics, film and glue, packaging and paper, hardware, textiles and wires, etc., stretching, compressing, stripping, plugging, bending, etc. The damage and the glue-strength test is used to impose a stable, consistent payload. Develops validation and control tables. The platform itself is the loading agency with the power values read out by the series of NIDEC-SHIMPO FGP/ FGPX/FGJN
NIDEC Officially placed FGS-50E-H under the same product entry as FGS-50E-L and shared the same official product photograph (the difference is in the way they look, in the type and capacity, speed, The image on this page is the official original of the purpose of the item, which is standardized and watered with a white bottom, without replacing the name of the crown, and the model difference is as shown in the specification table on this page
Q: What's the difference between FGS-50E-H and FGS-50E-L? Q: Q: Q
A: Only speed of entry is missing. FGS-50E-H is the high speed specification 20 — 600 mm/min, FGS-50E-L is a low speed specification 6 ~ 180 mm/min, with the remaining charge weight 500 N, process 400 mm, X XQW , The test stand 93 x 150 mm, which is all the same in mass, is about 20 kg.d for beats, mass double-test selection H; needs to see how the damage is done, sample is simpler to select L
Q: The platform contains a non-calculator?
A: Excludes. The platform is only loaded with the implementing agency and the force value is read out by the instrumentation.. The station may be equipped with a FGP/FGPX digital aerometric instrument or FGJN economic instrument, which is sufficient to select the corresponding measure according to the measured value. The officially identified installed machines are FGJN-2 — 50, FGP-0. 2 — 50, FGPX-0. 2 — 50. Reference: NIDEC-SHIMPO. Reference values: 0.2.
Q: Is 600 mm/min too fast to detect?
A: Speed does not per se affect the accuracy of the readings of the meter, but only the test time and curve patterns. High-speed silo benefits are quick to peak; to observe the complete force-position shift curve and the destruction process, either the low-rate or the FGS-50E-L are used. The two-stamp platform capacity is the same as 500 N
Q: Can you repeat the long-term tests?
A: Yes. Set the mode of action to CON, which allows the platform to travel continuously between top and bottom, in conjunction with the peak of the instrument or the upper or lower limit for use; the opportunity to stop immediately when the instrument detects the signal
Q: Is the product picture the official original?
A: NIDEC Officially placed FGS-50E-H under the same product entry and shared the same official product photograph (both look identical, the difference is in the sign type and capacity, speed, speed, etc.) The image on this page is the official original of the purpose of the item, which is standardized and watered with a white bottom, without replacing the name of the crown, and the model difference is as shown in the specification table on this page._._._._._. Reference: FGS-50E-L
Reference values from the original datasheet: 0.2.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.