TOHNICHI TCC100N2-G Torque Testers (Model TCC100N2-G) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI TCC100N2-G Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Accuracy | Accuracy ±1%+1 Digits |
|---|---|
| Channel CH | 1 |
| Torque Range [N · M] Minimum ~ Maximum | 4~100 |
| Torque Range [N · M] 1 Digits (Minimum Reading) | 0.01 |
| Torque Range [Kgf · Cm] Minimum ~ Maximum | 40~1000 |
| Torque Range [Kgf · Cm] 1 Digits (Minimum Reading) | 0.1 |
| Torque Range [Lbf · in] Minimum ~ Maximum | 35.5~885 |
| Torque Range [Lbf · in] 1 Digits (Minimum Reading) | 0.1 |
| Can Measure Effective Length L[Mm] | 575 |
| Insertion Drive Head a [mm] | 12.7 |
| Dimensions [Mm] Overall Length L’ | 714 |
| Dimensions [Mm] Full Width B | 388 |
| Dimensions [Mm] Full Height H | 375 |
| Dimensions [mm] | 480 |
| Dimensions [mm] | 270 |
| Dimensions [mm] | 230 |
| Weight [kg] | 35 |
| Accessories [Mm] Body Minus Rotation Connection Head Square Drive (External Thread - Internal Thread) | □12.7 - □9.53 □9.53 - □6.35 |
| Accessories [Mm] Body Rotation Connection Head Square Drive (External Thread)- Angle Head (Internal Thread) | □12.7 - W10·13·19 □12.7 - W12·14·17 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
DDHNICHI Japanese TOHNICHI TCC100N2-Dr.Tractor (TCC100N2-G) is a very strong torque in the TOHNICHI series (TOHNICHI) TCC2/TCC2-G series X-G Calibration of the specification product,_ Strangle range 4 — 100, accuracy 1%+1 bits. Touch screen number stylistic calibrationer/tool management system. 1%+ digits. Touch screen number Stight toggle screen number. Tact screen number tomort torque calibrator and tool
Product location: . Official labels: calibration, digital, manual handle, straight read/twarts, tool management system. . . TCC100N2. Reference: >, 4
The differences in the same series of models are mainly in the order of the torque scale and the scale resolution: the larger the scale, the more the resolution, the smaller the scale, the more the resolution._._. The model should allow the usual measurement value to be dropped in the range of 20% ~ 100%, both to ensure the accuracy of readings and to avoid the long-term use of the very small dimension leading to the accuracy drift. The TCC100N2-G on this page belongs to the TCC2/TCC2-G series, where the accuracy of the product is 1%+1 bits, for example, for touch screen numbers and tow calibrations and tool management systems
This page is taken from the official product map of TOHNICHI Production (TOHNICHI). This page is for the official entry TOHNICHI "TCC2/TCC2-G"..Screech of the product by TOHNICHI.Screen Stamp of the products. of the product TCC2/TCC2-G. of the official ZXEntry (series)_FunctThe same official map is shared with a number of models in the series, so the picture may not be fully consistent with the model's placards, and the product looks as if it was actually supplied.Ams are standardized for white-grounds, and the image is standardized according to the uniform norms of the site. For product descriptions only, not as a basis for acceptance.!
Q: What is the torque range of TCC100N2-G?
A: The official torque range of TCC100N2-G is 4 — 100, with precision 1%+1 digits, with specific typologies to see the above parameter table. 1 digits. to the
Q: How about a metro-type, a beauty model?!
A: TOHNICHI provides three models for international unit (N.m/cN.m et al.), public (kgf.cm et al.) and United States (lbf in/lbf.ft et al.) for the same product. The measurement capability is identical, with the difference being only in the unit or unit displayed. The station is built with an international unit type entry, and the other units type is included in the upper parameter list line " Backup/Other units model ", with the required unit system indicated at the next order
Q: Is the product picture the official original?
A: Yes. This page uses TOHNICHI to produce an official product map, which is processed and distributed through the standard and uniform watermarks of the white background, without changing the appearance of the product
Q: Is the calibration certificate provided? Q:Critetion certificate provided
A: The option of providing calibration certificates with uncertainty is provided by TOHNICHI, which is stated separately at the time of ordering; only the product body specification is listed on the site page, and does not contain the calibration certificate quotations
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.