TOHNICHI DOT50N Torque Testers (Model DOT50N) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI DOT50N Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Accuracy | Accuracy ±2% |
|---|---|
| Torque Range [N · M] Minimum ~ Maximum | 5~50 |
| Torque Range [N · M] Scale (Graduation) | 0.2 |
| Metric Model | 500DOT |
| Torque Range [Kgf · Cm] Minimum ~ Maximum | 50~500 |
| Torque Range [Kgf · Cm] Scale (Graduation) | 2 |
| Imperial Model | DOT430I |
| Torque Range [Lbf · in / Lbf · Ft] Minimum ~ Maximum | 50~430 |
| Torque Range [Lbf · in / Lbf · Ft] Scale (Graduation) | 2 |
| Torque Wrench Maximum Effective Length L[Mm] | 410 |
| Insertion Drive Head a [mm] | 9.53 |
| Dimensions [mm] | 511 |
| Dimensions [mm] | 263 |
| Dimensions [mm] | 221 |
| Dimensions [mm] | 245 |
| Dimensions [mm] | 150 |
| Dimensions [mm] | 87 |
| Dimensions [mm] | 142 |
| Weight [Kg] | 8 |
| Accessories [Mm] Minus Rotation Connection Head Square Drive (External Thread - Internal Thread) | □9.53 - □6.35 |
| Accessories [Mm] Rotation Connection Head Square Drive (External Thread)- Angle Head (Internal Thread) | □9.53 - W10·13·19 □9.53 - W12·14·17 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
DDHNINIIN Japanese TOHNICHI DOT 50N tow-screened wrench (DOT50N) in the TOHNICHI production series Dot XI (TOHNICHI) Dot The table-based tox-wire-dryer, the specification product, The torque range 5 — 50, accuracy 2%. The torque wrench detector with mechanical loader
Product location: Twist tow wrench tester with mechanical loader. Official labels: > products, > DOT, DOT, calibration, twarts, manual hand handles. , DOT, DOT, calibration, tamper, manual hand handle
The differences in the same series of models are mainly in the order of the torque scale and the scale resolution: the larger the scale, the more the resolution, the smaller the scale, the more the resolution._._. The model should allow the usual measurement value to be dropped in the range of 20%100%, which ensures the accuracy of readings and avoids the long-term use of the very small dimension leading to the accuracy drift. The DOT50N on this page belongs to the DOT series, where the accuracy of the factory 2% applies to the pointer to the toggler with mechanical loaders
This page is taken from the official product map of TOHNICHI Production (TOHNICHI). This page is for the official entry TOHNICHI "DOT"..Screech of the product by TOHNICHI.Screen Stamp of the official entry ZX. of the products.Scres of the productZEntry (series)_FunctThe same official map is shared with a number of models in the series, so the picture may not be fully consistent with the model's placards, and the product looks as if it was actually supplied.Ams are standardized for white-grounds, and the image is standardized according to the uniform norms of the site. For product descriptions only, not as a basis for acceptance.!
Q: What is the torque range of DOT50N?
A: The official torque range of DOT50N is 5 — 50, Accuracy 2%, with a specific typographical view of the above parameter table
Q: How about a metro-type, a beauty model?!
A: TOHNICHI provides three models for international unit (N.m/cN.m et al.), public (kgf.cm et al.) and United States (lbf in/lbf.ft et al.) for the same product. The measurement capability is identical, with the difference being only in the unit or unit displayed. The station is built with an international unit type entry, and the other units type is included in the upper parameter list line " Backup/Other units model ", with the required unit system indicated at the next order
Q: Is the product picture the official original?
A: Yes. This page uses TOHNICHI to produce an official product map, which is processed and distributed through the standard and uniform watermarks of the white background, without changing the appearance of the product
Q: Is the calibration certificate provided? Q:Critetion certificate provided
A: The option of providing calibration certificates with uncertainty is provided by TOHNICHI, which is stated separately at the time of ordering; only the product body specification is listed on the site page, and does not contain the calibration certificate quotations
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.