Home › Products

Product Overview

TOHNICHI DOT100N Torque Testers (Model DOT100N) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI DOT100N Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: TOHNICHI | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

TOHNICHI DOT100N Torque Testers

Technical Specifications

AccuracyAccuracy ±2%
Torque Range [N · M] Minimum ~ Maximum10~100
Torque Range [N · M] Scale (Graduation)0.5
Metric Model1000DOT
Torque Range [Kgf · Cm] Minimum ~ Maximum100~1000
Torque Range [Kgf · Cm] Scale (Graduation)5
Imperial ModelDOT1000I
Torque Range [Lbf · in / Lbf · Ft] Minimum ~ Maximum100~1000
Torque Range [Lbf · in / Lbf · Ft] Scale (Graduation)5
Torque Wrench Maximum Effective Length L[Mm]410
Insertion Drive Head a [mm]12.7
Dimensions [mm]511
Dimensions [mm]263
Dimensions [mm]221
Dimensions [mm]245
Dimensions [mm]150
Dimensions [mm]87
Dimensions [mm]142
Weight [Kg]8
Accessories [Mm] Minus Rotation Connection Head Square Drive (External Thread - Internal Thread)□12.7 - □6.35 □12.7 - □9.53
Accessories [Mm] Rotation Connection Head Square Drive (External Thread)- Angle Head (Internal Thread)□12.7 - W10·13·19 □12.7 - W12·14·17

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

DDHNINIIN Japanese TOHNICHI DOT 100N tow-screened wrench (DOT100N) in the TOHNICHI production series Dot XI (TOHNICHI) Dot The table-based tox-wire-dryer, the specification product, The torque range 10 — 100, accuracy 2%. The torque wrench detector with mechanical loader

Product location: Twist tow wrench tester with mechanical loader. Official labels: > products, > DOT, DOT, calibration, twarts, manual hand handles. , DOT, DOT, calibration, tamper, manual hand handle

Key Advantages

Application Scope

Options and Configuration Description

The differences in the same series of models are mainly in the order of the torque scale and the scale resolution: the larger the scale, the more the resolution, the smaller the scale, the more the resolution._._. The model should allow the usual measurement value to be dropped in the range of 20%100%, which ensures the accuracy of readings and avoids the long-term use of the very small dimension leading to the accuracy drift. The DOT100N on this page belongs to the DOT series, where the accuracy of the factory 2% applies to the pointer to the toggler with mechanical loaders

About the Product Images on This Page

This page is taken from the official product map of TOHNICHI Production (TOHNICHI). This page is for the official entry TOHNICHI "DOT"..Screech of the product by TOHNICHI.Screen Stamp of the official entry ZX. of the products.Scres of the productZEntry (series)_FunctThe same official map is shared with a number of models in the series, so the picture may not be fully consistent with the model's placards, and the product looks as if it was actually supplied.Ams are standardized for white-grounds, and the image is standardized according to the uniform norms of the site. For product descriptions only, not as a basis for acceptance.!

FAQ

Q: What is the torque range of DOT100N?

A: The official torque range of DOT100N is 10 — 100, Accuracy 2%, with a specific typographical view of the above parameter table

Q: How about a metro-type, a beauty model?!

A: TOHNICHI provides three models for international unit (N.m/cN.m et al.), public (kgf.cm et al.) and United States (lbf in/lbf.ft et al.) for the same product. The measurement capability is identical, with the difference being only in the unit or unit displayed. The station is built with an international unit type entry, and the other units type is included in the upper parameter list line " Backup/Other units model ", with the required unit system indicated at the next order

Q: Is the product picture the official original?

A: Yes. This page uses TOHNICHI to produce an official product map, which is processed and distributed through the standard and uniform watermarks of the white background, without changing the appearance of the product

Q: Is the calibration certificate provided? Q:Critetion certificate provided

A: The option of providing calibration certificates with uncertainty is provided by TOHNICHI, which is stated separately at the time of ordering; only the product body specification is listed on the site page, and does not contain the calibration certificate quotations

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver

STC500CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC500CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G Digital Torque Screwdriver

STC500CN3-G
└ TOHNICHI (Japan)
TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver

STC200CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC200CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC200CN3-G Digital Torque Screwdriver

STC200CN3-G
└ TOHNICHI (Japan)
TOHNICHI STC50CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC50CN3-G-BT Digital Torque Screwdriver

STC50CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC50CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC50CN3-G Digital Torque Screwdriver

STC50CN3-G
└ TOHNICHI (Japan)