Home › Products

Product Overview

TOHNICHI LC1000N3-G Torque Testers (Model LC1000N3-G) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI LC1000N3-G Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: TOHNICHI | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

TOHNICHI LC1000N3-G Torque Testers

Technical Specifications

AccuracyAccuracy ±1%+1 Digits
Torque Range [N · M] PEAK50.0~99.9
Torque Range [N · M] 1 Digits (Minimum Reading)0.1
Torque Range [N · M] RUN50.0~1000.0
Torque Range [Kgf · Cm / Kgf · M] PEAKkgf·m5.0~9.99
Torque Range [Kgf · Cm / Kgf · M] 1 Digits (Minimum Reading)kgf·m0.01
Torque Range [Kgf · Cm / Kgf · M] RUNkgf·m5.0~100.0
Torque Range [Lbf · in] PEAK500~999
Torque Range [Lbf · in] 1 Digits (Minimum Reading)1
Torque Range [Lbf · in] RUN500~8800
Insertion Drive Head a [mm]25.4
Dimensions [Mm] Overall Length500
Dimensions [Mm] Full Width290
Dimensions [Mm] Full Height186
Weight [kg]34
Accessories [Mm] Sleeve Rotation Connection Head□19.05(external Thread)- □12.7(internal Thread) No.274 □25.4(external Thread)- □19.05(internal Thread) No.276
DisplayFilm LCD( · · )
Display Digits3 Digits (PEAK) / 5 Digits (RUN)
Data Storage Quantity1000 records Data (Counting Device, Time, Torque Data)
Measurement modePEAK/RUN
Zero Setting AdjustmentC Key, Power Supply OFF / ON Auto Zero
Setting Upper / Lower Limit Value10 pcs
Data outputcompatible RS232C Standard, USB(B Type) Connection Head Use at Communication
Memory / DigitManual / Automatic (can at 0.1~5.0 s Range internal Switching)
Operating Temperature Range [°C]0~40(non-condensing)
Power Supply AC[V]100~240 ±10% 50/60Hz

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

DDHNICHI Japanese TOHNICHI LC1000N3-G Digital Twilight Wire Checker (LC1000N3-G) is a significant number in the TOHNICHI Production (TOHNICHI) LC3/LC3-G series XV series ZX X-G XZX QT XV X The torque wrench calibrations, the specifications.. — The torque range 50.0 — 99.9, accuracy 1%+1 bits. The assembly line is fitted with a numerical torque wrencher, with a qualified determination

Product location: High-speed screening is more advanced. The results are clear and the test is carried out with a "qualified function" based on the colour of the display.Screen A more simple and accurate daily check of the tow wrench in the assembly line is the TOHNICHI digital wrench verification "Conforming line with the LL3/LC3-G series". Official labels: > products, LC3/LC3-G, assembly line calibration, verification, digital, manual loading

Key Advantages

Application Scope

Options and Configuration Description

The differences in the same series of models are mainly in the order of the torque scale and the scale resolution: the larger the scale, the more the resolution, the smaller the scale, the more the resolution._._. The model should allow the usual measurement value to be dropped in the range of 20% ~ 100%, both to ensure the accuracy of readings and to avoid the long-term use of the very small dimension leading to the accuracy drift. LC1000N3-G on this page belongs to the LC3/LC3-G series, where the accuracy of the manufacturer 1%+1 bits, which are suitable for the numerical twisting wrench verification of the assembly line,_ Take the qualifying decision and so on. —

About the Product Images on This Page

This page is taken from the official product map of TOHNICHI Production (TOHNICHI). This page is for the official entry TOHNICHI "LC3/LC3-G"..Screech of the product by TOHNICHI.Screen Stamp of the products. of the product LC3/LC3-G. of the official ZXEntry (series)_FunctThe same official map is shared with a number of models in the series, so the picture may not be fully consistent with the model's placards, and the product looks as if it was actually supplied.Ams are standardized for white-grounds, and the image is standardized according to the uniform norms of the site. For product descriptions only, not as a basis for acceptance.!

FAQ

Q: What is the torque range of LC1000N3-G?

A: The official torque range of LC1000N3-G is 50.0 — 99.9, with precision 1%+1 digits, with specific typologies to see the above parameter table. 1 digits. to the

Q: How about a metro-type, a beauty model?!

A: TOHNICHI provides three models for international unit (N.m/cN.m et al.), public (kgf.cm et al.) and United States (lbf in/lbf.ft et al.) for the same product. The measurement capability is identical, with the difference being only in the unit or unit displayed. The station is built with an international unit type entry, and the other units type is included in the upper parameter list line " Backup/Other units model ", with the required unit system indicated at the next order

Q: Is the product picture the official original?

A: Yes. This page uses TOHNICHI to produce an official product map, which is processed and distributed through the standard and uniform watermarks of the white background, without changing the appearance of the product

Q: Is the calibration certificate provided? Q:Critetion certificate provided

A: The option of providing calibration certificates with uncertainty is provided by TOHNICHI, which is stated separately at the time of ordering; only the product body specification is listed on the site page, and does not contain the calibration certificate quotations

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver

STC500CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC500CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G Digital Torque Screwdriver

STC500CN3-G
└ TOHNICHI (Japan)
TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver

STC200CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC200CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC200CN3-G Digital Torque Screwdriver

STC200CN3-G
└ TOHNICHI (Japan)
TOHNICHI STC50CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC50CN3-G-BT Digital Torque Screwdriver

STC50CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC50CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC50CN3-G Digital Torque Screwdriver

STC50CN3-G
└ TOHNICHI (Japan)