TOHNICHI ST10N3-G Torque Testers (Model ST10N3-G) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI ST10N3-G Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Accuracy | Accuracy ±1%+1 Scale |
|---|---|
| Its Unit Model | ST10N3-G-BT |
| Torque Range [N・m] Most ~ Maximum | 2~10 |
| Torque Range [N・m] Scale | 0.01 |
| Torque Range [cN・m] Most ~ Maximum | 200~1000 |
| Torque Range [cN・m] Scale | 1 |
| Torque Range [kgf・cm] Most ~ Maximum | 20~100 |
| Torque Range [kgf・cm] Scale | 0.1 |
| Torque Range [kgf・m] Most ~ Maximum | 0.2~1 |
| Torque Range [kgf・m] Scale | 0.001 |
| Torque Range [lbf・in] Most ~ Maximum | 17.6~88 |
| Torque Range [lbf・in] Scale | 0.1 |
| Torque Range [lbf・ft] Most ~ Maximum | 1.5~7.3 |
| Torque Range [lbf・ft] Scale | 0.01 |
| Torque Range [ozf・in] Most ~ Maximum | 285~1400 |
| Torque Range [ozf・in] Scale | 1 |
| Dimensions [Mm] L’ | 75 |
| Dimensions [Mm] E | 46(50) |
| Dimensions [Mm] C | 49 |
| Dimensions [Mm] ΦD | 13 |
| Dimensions [Mm] □a | 6.35 |
| Dimensions [Mm] Φd1 | 2.1 |
| Dimensions [Mm] Φd2 | 2.1 |
| Dimensions [Mm] A | 53 |
| Dimensions [Mm] E | 50(52) |
| Weight [Kg] | 0.25 |
| Angle measuring range | 0 - 999º |
| Angle accuracy | ±2º + 1 Scale (by 30º / s to 600º / s Rotatable 90º when) |
| Measuring Direction | CW( when Needle) / CCW( when Needle) |
| Display | 7 Range LCD Display Counting Value: 3 Digits (Text digits Height 3mm) Torque / Rotatable Angle Display: 4 Digits (Text digits Height 7mm) Unit, Electric Quantity, Measurement Direction |
| Measurement mode | PEAK/RUN |
| Data Storage Quantity | 999 |
| Calculation Functions | Sampling Number, Maximum, Minimum, Average |
| Power Supply | NiMH Battery groups |
| Continuous operating time | Approx. 8 hours ( when, Approx. 10 hours) |
| Charger | Input: 100 to 240V AC±10% (PSE, Compliant with CE Standard) |
| Charging time | Approx. 2 hours |
| Operating Temperature Range | 0-40ºC |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
DHNICHI Japanese TOHNICHI ST10N3-G Digital Twilight Wire Checker (ST10N3-G) is in the TOHNICHI Production (TOHNICHI) ST3-G/ST3-G-Turt series series he tortuous wrench calibration of the specifications, — Strangle range 2 — 10, accuracy 1%+1 tic. Number of tox wrencher verifications.Scretch 1 . Number-Stight wrest wrench
Product location: . Official labels: check, digital, empty, straight/text, chargeable. . Reference: >, 4
The differences in the same series of models are mainly in the order of the torque scale and the scale resolution: the larger the scale, the more the resolution, the smaller the scale, the more the resolution._._. The model should allow the usual measurement value to be dropped in the range of 20% ~ 100%, both to ensure the accuracy of readings and to avoid the long-term use of the very small dimension leading to the accuracy drift. The ST10N3-G on this page belongs to the ST3-G/ST3-G-BT series, where the accuracy of the production is 1%+1 tic, etc. for the number of the torque wrench hand checkers. 1
This page is taken from the official product map of TOHNICHI Production (TOHNICHI). This page is for the official entry TOHNICHI "ST3-G/ST3-G-BT"..Screech of the product by TOHNICHI.Screen Stamp of the products. of the product ST3-G/ST3-G-BT. of the official ZXEntry (series)_FunctThe same official map is shared with a number of models in the series, so the picture may not be fully consistent with the model's placards, and the product looks as if it was actually supplied.Ams are standardized for white-grounds, and the image is standardized according to the uniform norms of the site. For product descriptions only, not as a basis for acceptance.!
Q: What is the torque range of ST10N3-G?
A: The official torque range of ST10N3-G is 2 — 10, Accuracy 1%+1 scale, with a specific number of typographical scales to see the above parameter table. + 1
Q: How about a metro-type, a beauty model?!
A: TOHNICHI provides three models for international unit (N.m/cN.m et al.), public (kgf.cm et al.) and United States (lbf in/lbf.ft et al.) for the same product. The measurement capability is identical, with the difference being only in the unit or unit displayed. The station is built with an international unit type entry, and the other units type is included in the upper parameter list line " Backup/Other units model ", with the required unit system indicated at the next order
Q: Is the product picture the official original?
A: Yes. This page uses TOHNICHI to produce an official product map, which is processed and distributed through the standard and uniform watermarks of the white background, without changing the appearance of the product
Q: Is the calibration certificate provided? Q:Critetion certificate provided
A: The option of providing calibration certificates with uncertainty is provided by TOHNICHI, which is stated separately at the time of ordering; only the product body specification is listed on the site page, and does not contain the calibration certificate quotations
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.