TOHNICHI BTG150CN Torque Testers (Model BTG150CN) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI BTG150CN Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Accuracy | Accuracy ±2% |
|---|---|
| Unit Model with Correction Surface Memory Pointer | BTG150CN-S |
| Torque Range [cN · M] Minimum ~ Maximum | 20~150 |
| Torque Range [cN · M] Scale (Graduation) | 2 |
| Its Unit Model | 15BTG |
| Metric Model with Correction Surface Memory Pointer | 15BTG-S |
| Torque Range [Gf · Cm] Minimum ~ Maximum | 2~15 |
| Torque Range [Gf · Cm] Scale (Graduation) | 0.2 |
| Imperial Model with Correction Surface Memory Pointer BTG60Z-S BTG120Z-S | 15BTG-A-S |
| Torque Range [Ozf · in / Lbf · in] Minimum ~ Maximum Ozf · in6~6 10~120 | 2~15 |
| Torque Range [Ozf · in / Lbf · in] Scale Ozf · in 1 2 | 0.2 |
| Memory Pointer Correction Surface | pcs |
| Memory Pointer Surface | Standard |
| Dimensions [Mm] Overall Length L’ | 127 |
| Dimensions [Mm] Diameter D | 64.2 |
| Dimensions [Mm] Clamp Фd | 1~8.5 |
| Dimensions [Mm] Scale Disk Diameter D1 | 53 |
| Dimensions [Mm] Body L1 | 67 |
| Weight [Kg] Body L1 | 0.52 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
DDHNINICHI Japanese TOHNICHI BTG 150CN pointer torque table (BTG150CN) is TOHNICHI Production (TOHNICHI) ATG/BTG (-S) XX Z Z (-S) he product of the tox table of the finger in the series, The torque range 20-150, accuracy 2%. The BTG series of pointers to twist the tow watch, three-clap clamps. 2%. series of pointers, 3-clap clips
Product location: . Official label: simulator, triclap, straight read/twarts. . Reference: >, 4
The differences in the same series of models are mainly in the order of the torque scale and the scale resolution: the larger the scale, the more the resolution, the smaller the scale, the more the resolution._._. The model should allow the usual measurement value to be dropped in the range of 20% ~ 100%, both to ensure the accuracy of readings and to avoid the long-term use of the very small dimension leading to the accuracy drift. The BTG150CN on this page belongs to the ATG/BTG(-S) series, where the accuracy of the factory is 2%, for example, in the BTG series of pointers to twist meters, and in the case of the three-clap clips
This page is taken from the official product map of TOHNICHI Production (TOHNICHI). This page is used for the official entry TOHNICHI "ATG/BTG(-S)" by the official TOHNICHIEntry (series)_FunctThe same official map is shared with a number of models in the series, so the picture may not be fully consistent with the model's placards, and the product looks as if it was actually supplied.Ams are standardized for white-grounds, and the image is standardized according to the uniform norms of the site. For product descriptions only, not as a basis for acceptance.!
Q: What is the torque range of BTG150CN?
A: The official torque range of BTG150CN is 20 — 150, Accuracy 2%, with a specific typographical view of the above parameter table
Q: How about a metro-type, a beauty model?!
A: TOHNICHI provides three models for international unit (N.m/cN.m et al.), public (kgf.cm et al.) and United States (lbf in/lbf.ft et al.) for the same product. The measurement capability is identical, with the difference being only in the unit or unit displayed. The station is built with an international unit type entry, and the other units type is included in the upper parameter list line " Backup/Other units model ", with the required unit system indicated at the next order
Q: Is the product picture the official original?
A: Yes. This page uses TOHNICHI to produce an official product map, which is processed and distributed through the standard and uniform watermarks of the white background, without changing the appearance of the product
Q: Is the calibration certificate provided? Q:Critetion certificate provided
A: The option of providing calibration certificates with uncertainty is provided by TOHNICHI, which is stated separately at the time of ordering; only the product body specification is listed on the site page, and does not contain the calibration certificate quotations
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.