TOHNICHI TME2000CN3-G Torque Testers (Model TME2000CN3-G) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI TME2000CN3-G Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Accuracy | Accuracy ±0.3% Full Scale |
|---|---|
| Torque Range [cN・m] Minimum - Maximum | 200 - 2000 |
| Torque Range [cN・m] 1 Digits (Minimum Reading) | 2 |
| Torque Range [N・m] Minimum - Maximum | 2 - 20 |
| Torque Range [N・m] 1 Digits (Minimum Reading) | 0.02 |
| Torque Range [gf・cm] Minimum - Maximum | ― |
| Torque Range [gf・cm] 1 Digits (Minimum Reading) | ― |
| Torque Range [kgf・cm] Minimum - Maximum | 20 - 200 |
| Torque Range [kgf・cm] 1 Digits (Minimum Reading) | 0.2 |
| Torque Range [ozf・in] Minimum - Maximum | 280 - 2800 |
| Torque Range [ozf・in] 1 Digits (Minimum Reading) | 2 |
| Torque Range [lbf・in] Minimum - Maximum | 17.5 - 175 |
| Torque Range [lbf・in] 1 Digits (Minimum Reading) | 0.2 |
| Dimensions [Mm] Overall Length | 273.5 |
| Dimensions [Mm] Width | 217 |
| Dimensions [Mm] Height | 116.5 |
| Dimensions [Mm] Can Disk Diameter φ | 7 - 190 |
| Weight [Kg] | 3.5 |
| Accuracy ±0.3% Full Scale + 1 Digits (Minimum Reading) | Accuracy ±0.3% Full Scale + 1 Digits |
| Display | ( - - ) |
| Data Storage Quantity | 1000 records Data |
| Statistics Processing | Sample This Number / Maximum / Minimum / Average / Range / Standard Deviation |
| Measurement mode | PEAK / RUN / DOUBLE PEAK |
| Data output | USB Connection Head to Output |
| Digit | Manual / Automatic (0.5 - 5.0 s, switchable) |
| Continuous Data Output Interval | Approx. per 20 Milliseconds (Application Software Wave Interval) |
| Power Supply | AC100 - 240V ± 10% |
| Power Consumption | less than 5W |
| Operating Temperature Range | 0 - 40℃(non-condensing) |
| Can Measuring Mass | less than 5 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
DAHNINIIN THROUGH Number TRUE (TME2000CN3-G) is a digital torquerometer in the TOHNICHI series of TOHNICHI XX Plan XV The product of the cell,! The torque range 200 - 2000, accuracy 0.3% full tic. The TME3-G series has a torque array, a pole. Reference: TOHNICHI, TME2000CN3-, TME3
Product location: . Official label: digital, straight/twarts, poles. . . Reference: >, 4
The differences in the same series of models are mainly in the order of the torque scale and the scale resolution: the larger the scale, the more the resolution, the smaller the scale, the more the resolution._._. The model should allow the usual measurement value to be dropped in the range of 20% ~ 100%, both to ensure the accuracy of readings and to avoid the long-term use of the very small dimension leading to the accuracy drift. The TME2000CN3-G on this page belongs to the TME3-G series, where the accuracy of the manufacturer 0.3% is full in engraved, for example, in the TME3-G series of a number-obstector, a pole
This page is taken from the official product map of TOHNICHI Production (TOHNICHI). This page is for the official entry TOHNICHI "TME3-G"..Screech of the product by TOHNICHI.Screen Stamp of the products. of the product TME3-G. of the official ZXEntry (series)_FunctThe same official map is shared with a number of models in the series, so the picture may not be fully consistent with the model's placards, and the product looks as if it was actually supplied.Ams are standardized for white-grounds, and the image is standardized according to the uniform norms of the site. For product descriptions only, not as a basis for acceptance.!
Q: What is the torque range of TME2000CN3-G?
A: The official torque range of TME2000CN3-G is 200 - 2000, with precision 0.3% full entangent, with specific typitudes to see the list of parameters above
Q: How about a metro-type, a beauty model?!
A: TOHNICHI provides three models for international unit (N.m/cN.m et al.), public (kgf.cm et al.) and United States (lbf in/lbf.ft et al.) for the same product. The measurement capability is identical, with the difference being only in the unit or unit displayed. The station is built with an international unit type entry, and the other units type is included in the upper parameter list line " Backup/Other units model ", with the required unit system indicated at the next order
Q: Is the product picture the official original?
A: Yes. This page uses TOHNICHI to produce an official product map, which is processed and distributed through the standard and uniform watermarks of the white background, without changing the appearance of the product
Q: Is the calibration certificate provided? Q:Critetion certificate provided
A: The option of providing calibration certificates with uncertainty is provided by TOHNICHI, which is stated separately at the time of ordering; only the product body specification is listed on the site page, and does not contain the calibration certificate quotations
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.