TOHNICHI 2TME500CN2 Torque Testers (Model 2TME500CN2) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI 2TME500CN2 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Accuracy | Accuracy ±1%+1 Digits. |
|---|---|
| Torque Range [cN · M] Minimum ~ Maximum | 100~500 |
| Torque Range [cN · M] 1 Digits (Minimum Reading) | 0.5 |
| Metric Model | 2TME500CN2-M |
| Torque Range [Gf · Cm / Kgf · Cm] Minimum ~ Maximum | 10~50 |
| Torque Range [Gf · Cm / Kgf · Cm] 1 Digits (Minimum Reading) | 0.05 |
| Imperial Model | 2TME500CN2-I |
| Torque Range [Ozf · in / Lbf · in] Minimum ~ Maximum | 8.8~44 |
| Torque Range [Ozf · in / Lbf · in] 1 Digits (Minimum Reading) | 0.05 |
| Dimensions [Mm] Overall Length L’ | 331 |
| Dimensions [Mm] Width B | 223 |
| Dimensions [Mm] Height H | 283 |
| Dimensions [Mm] Clamp ФD | 18~190 |
| Dimensions [Mm] Chuck Part Division ℓ1 | 20~154 |
| Dimensions [Mm] Chuck Part Division ℓ2 | 20~140 |
| Weight [kg] | 12 |
| Data Storage Quantity | 99 records Data |
| Statistics Processing | Sampling Value, Maximum, Minimum Average Range Standard Deviation |
| Measurement mode | PEAK / RUN |
| Zero Setting Adjustment | Auto Zero |
| Digit | Manual / Automatic (0.5 -5.0 s, can by 0.1 s is Unit Switching) |
| Data output | RS232C compatible |
| Operating Temperature Range [°C] | 0~40 non-condensing |
| Power Supply AC[V] | 100~240 ±10% 50 / 60 Hz Automatic Replace levels |
| Power Consumption [W] | less than 5 |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
Specifications: TOHNICHI TME2 2 500 100 1 TME CN. Please contact our engineers for the full technical wording. Reference values: 2, 500, 1.
Product location: . Official label: digital, straight/text, pole . . 2 TME 500 CN 2. Reference: >, 4
The differences in the same series of models are mainly in the order of the torque scale and the scale resolution: the larger the scale, the more the resolution, the smaller the scale, the more the resolution._._. The model should allow the usual measurement value to be dropped in the range of 20% ~ 100%, both to ensure the accuracy of readings and to avoid the long-term use of the very small dimension leading to the accuracy drift. 2 TME 500 CN 2 in the TME2 series, he factory accuracy 1%+1 digits. This applies to the TME2 series for a tortile, a pole, etc. 1 1 Q
This page is taken from the official product map of TOHNICHI Production (TOHNICHI). This page is for the official entry TOHNICHI "TME2"..Screech of the product by TOHNICHI.Screen Stamp of the products. of the product TME2. of the official ZXEntry (series)_FunctThe same official map is shared with a number of models in the series, so the picture may not be fully consistent with the model's placards, and the product looks as if it was actually supplied.Ams are standardized for white-grounds, and the image is standardized according to the uniform norms of the site. For product descriptions only, not as a basis for acceptance.!
Q: What is the torque range of 2 TME 500 CN 2? Q: What is the torque range of 2?s torescryssss tosssss tossssss tosss tossss to the tor of the tor of ZX
A: 2 TME 500 CN 2 is the official torque range 100 500, which is the most important to the government. Qatars a toll of the world's people. Q 4ZZX Accuracy 1%+1 digits. The specific typographical values are shown in the list of parameters above. ZX
Q: How about a metro-type, a beauty model?!
A: TOHNICHI provides three models for international unit (N.m/cN.m et al.), public (kgf.cm et al.) and United States (lbf in/lbf.ft et al.) for the same product. The measurement capability is identical, with the difference being only in the unit or unit displayed. The station is built with an international unit type entry, and the other units type is included in the upper parameter list line " Backup/Other units model ", with the required unit system indicated at the next order
Q: Is the product picture the official original?
A: Yes. This page uses TOHNICHI to produce an official product map, which is processed and distributed through the standard and uniform watermarks of the white background, without changing the appearance of the product
Q: Is the calibration certificate provided? Q:Critetion certificate provided
A: The option of providing calibration certificates with uncertainty is provided by TOHNICHI, which is stated separately at the time of ordering; only the product body specification is listed on the site page, and does not contain the calibration certificate quotations
Reference values from the original datasheet: 2, 500.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.