Home › Products

Product Overview

TOHNICHI 2TME1000CN2 Torque Testers (Model 2TME1000CN2) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI 2TME1000CN2 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.

Brand: TOHNICHI | Category: Torque Testers

Sales Inquiries: 15626018696 · 78403603@qq.com

TOHNICHI 2TME1000CN2 Torque Testers

Technical Specifications

AccuracyAccuracy ±1%+1 Digits.
Torque Range [cN · M] Minimum ~ Maximum200~1000
Torque Range [cN · M] 1 Digits (Minimum Reading)1
Metric Model2TME1000CN2-M
Torque Range [Gf · Cm / Kgf · Cm] Minimum ~ Maximum20~100
Torque Range [Gf · Cm / Kgf · Cm] 1 Digits (Minimum Reading)0.1
Imperial Model2TME1000CN2-I
Torque Range [Ozf · in / Lbf · in] Minimum ~ Maximum17.6~88
Torque Range [Ozf · in / Lbf · in] 1 Digits (Minimum Reading)0.1
Dimensions [Mm] Overall Length L’331
Dimensions [Mm] Width B223
Dimensions [Mm] Height H283
Dimensions [Mm] Clamp ФD18~190
Dimensions [Mm] Chuck Part Division ℓ120~154
Dimensions [Mm] Chuck Part Division ℓ220~140
Weight [kg]12
Data Storage Quantity99 records Data
Statistics ProcessingSampling Value, Maximum, Minimum Average Range Standard Deviation
Measurement modePEAK / RUN
Zero Setting AdjustmentAuto Zero
DigitManual / Automatic (0.5 -5.0 s, can by 0.1 s is Unit Switching)
Data outputRS232C compatible
Operating Temperature Range [°C]0~40 non-condensing
Power Supply AC[V]100~240 ±10% 50 / 60 Hz Automatic Replace levels
Power Consumption [W]less than 5

Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.

Product Description

Specifications: TOHNICHI TME2 2 1000 200 1 TME CN. Please contact our engineers for the full technical wording. Reference values: 2, 1000, 1.

Product location: . Official label: digital, straight/text, pole . . 2 TME 500 CN 2. Reference: >, 4

Key Advantages

Application Scope

Options and Configuration Description

The differences in the same series of models are mainly in the order of the torque scale and the scale resolution: the larger the scale, the more the resolution, the smaller the scale, the more the resolution._._. The model should allow the usual measurement value to be dropped in the range of 20% ~ 100%, both to ensure the accuracy of readings and to avoid the long-term use of the very small dimension leading to the accuracy drift. 2 TME 1000 CN 2 in the TME2 series, he factory accuracy 1%+1 digits. This applies to the TME2 series for a tortile, a pole, etc. 1 1 Q

About the Product Images on This Page

This page is taken from the official product map of TOHNICHI Production (TOHNICHI). This page is for the official entry TOHNICHI "TME2"..Screech of the product by TOHNICHI.Screen Stamp of the products. of the product TME2. of the official ZXEntry (series)_FunctThe same official map is shared with a number of models in the series, so the picture may not be fully consistent with the model's placards, and the product looks as if it was actually supplied.Ams are standardized for white-grounds, and the image is standardized according to the uniform norms of the site. For product descriptions only, not as a basis for acceptance.!

FAQ

Q: What is the torque range of 2 TME 1000 CN 2? Q: What is the torque range of 2?s torescryssss tosssss tossssss tosss tossss to the tor of the tor of ZX

A: 2 TME 1000 CN 2 is the official torque range 200 1000, which is the most important to the government. Qatars a toll of the world's people. Q 4ZZX Accuracy 1%+1 digits. The specific typographical values are shown in the list of parameters above. ZX

Q: How about a metro-type, a beauty model?!

A: TOHNICHI provides three models for international unit (N.m/cN.m et al.), public (kgf.cm et al.) and United States (lbf in/lbf.ft et al.) for the same product. The measurement capability is identical, with the difference being only in the unit or unit displayed. The station is built with an international unit type entry, and the other units type is included in the upper parameter list line " Backup/Other units model ", with the required unit system indicated at the next order

Q: Is the product picture the official original?

A: Yes. This page uses TOHNICHI to produce an official product map, which is processed and distributed through the standard and uniform watermarks of the white background, without changing the appearance of the product

Q: Is the calibration certificate provided? Q:Critetion certificate provided

A: The option of providing calibration certificates with uncertainty is provided by TOHNICHI, which is stated separately at the time of ordering; only the product body specification is listed on the site page, and does not contain the calibration certificate quotations

Reference values from the original datasheet: 2, 1000.

All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.

For a quotation, lead time or an optional calibration certificate, please contact our engineers.

Related Products

TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G-BT Digital Torque Screwdriver

STC500CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC500CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC500CN3-G Digital Torque Screwdriver

STC500CN3-G
└ TOHNICHI (Japan)
TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC200CN3-G-BT Digital Torque Screwdriver

STC200CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC200CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC200CN3-G Digital Torque Screwdriver

STC200CN3-G
└ TOHNICHI (Japan)
TOHNICHI STC50CN3-G-BT Digital Torque Screwdriver
Torque Testers

TOHNICHI STC50CN3-G-BT Digital Torque Screwdriver

STC50CN3-G-BT
└ TOHNICHI (Japan)
TOHNICHI STC50CN3-G Digital Torque Screwdriver
Torque Testers

TOHNICHI STC50CN3-G Digital Torque Screwdriver

STC50CN3-G
└ TOHNICHI (Japan)