TOHNICHI AC180N3 Torque Testers (Model AC180N3) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI AC180N3 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Torque Adjustment Range [N · M] Minimum ~ Maximum | 40~180 |
|---|---|
| 1 Scale [N · M] | 2 |
| Metric Model | AC1800M3 |
| Metric Torque Range [Kgf · Cm] Minimum ~ Maximum | 400~1800 |
| Metric 1 Scale [Kgf · Cm] | 20 |
| Imperial Model | AC130F3-1/2 |
| Imperial Torque Range | 30~130lbf·ft |
| Imperial 1 Scale | 2lbf·ft |
| Torque [N · M] | 15 |
| Rotational Speed [r.p.m.] | 800 |
| Applicable Steel | M12 |
| Applicable High Voltage | M10 |
| Maximum Hand Force P[N] | 450 |
| Rated Air Pressure [MPa] | 0.5 |
| Air Mass Flow Quantity [m3 / Min] | 0.22 |
| Effective Length L[Mm] | 400 |
| Overall Length L'[Mm] | 488 |
| Full Height H[Mm] | 124.5 |
| Wrench Head R[Mm] | 20.5 |
| Square Drive a[Mm] | 12.7(1/2") |
| Square Drive B[Mm] | 26.4 |
| Square Drive C[Mm] | 12.2 |
| ΦD[mm] | 16 |
| Weight [Kg] | 3.3 |
| Limit Digit | No (This is No LS Version) |
| Accuracy | ±3% |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
AC180N3 is a TOHNICHI Production (TOHNICHI) AC3 seriesScreaksScSemi-automatic wrench (Airtork)The current page is not LS, which adjusts the scope of the torque to 40-, which is a very simple version of the text. Precision 3%, header 12.7 (1/2"). Z. Reference: 180 N·m
Applicable to assembly and bulk production.!
The semi-automatic wrench (Airtork) AC 3 series can use shock wrench “shock-proof kit”. Work efficiency is improved by the reduced vibrations during rotation
The A3 series is a high pre-strength
The routine two-step tightening of the shock wrench plus the wrench can be performed with a wrench, which has greatly improved operational efficiency
Pre-fixing operations are performed using aerodynamic motors, followed by high precision tightening operations using manual toggle wrench.S
The tight toque caused by air pressure changes did not deviate as the tortuous wrench was used to eventually tighten
The N.m. unit scale simply changes the tight torque
Calibration can be done with a torque wrench
ELS with a restricted switch. Combination with CNA-4MK (required) to construct the bugproof (Palem) system._. Reference: 3
The AC3/ ACLS 3 series has been in compliance with ISO6789: 2017 since 2022 year , except for some products.Strate , X, X, XZ XVX XV XVX Q series, XZ X X. Reference: 1
Description of parameter calibreThe above values are taken by article from the official Chinese-language station specification table of TOHNICHI, which is entered in the model column; The parameters for the merged cells in the official table have been filled in as a recognized correspondence (e.g., a header with only 9.53 and 12.7, The size of the individual model is required (swipe, inner hexagon, inner hexagon, inner corner). Attachment size, etc., please refer to the original TOHNICHI factory drawings and random files. Reference: AC25N3/50N3/100N3, AC180N3, 3, 8, 1, 2
①First, you have to press the torque to select the slotThis page 4 file covers 5 25 , 10 50 , 20 100 , : XQZ , 40 — 180 N·m; pre-string toxes 11/15/15 N·m respectively, which is not sufficient to ultimately hard torque to reach the set valueNo mix of sides.!!AC25N3/AC50N3/AC100N3 for 3/8" (9.53mm), AC180N3 for 1/2" (12.7mm) XX XV XZ he cylinder and the converted head shall be matched to the head size of the headAir-dynamic requirementAQuantified pressure 0.5MPa, which ensures the stability of the gas source; air pressure fluctuations do not affect the tight torque value, as the final strength is accomplished by a torque wrenchAerodynamic cylinders only(official attention) The common set is vulnerable to shocks in the instant of separationIt takes count to be protected against errorSelect the ACLS series (with a restricted switch) and the CNA-4mk3 counter (to be purchased) to form the Error-Responsive (P/1998/44TM) system. 6 This page type..ScreaksScresSSNot for torque check%1%If you want to check, use TOHNICHI tow wrench calibration. The metric system and the ISO product have been in line since the year 2022. Reference: ISO6789, 2017, 1
This page model, parameters, functional descriptions are taken from the official Chinese site page of TOHNICHI (AC3 semi-automatic wrench / holtork) which produces the Chinese site, and does not use any third party information. The government has also failed to take official pricing.!
Product photo description:CharThe master chart of this page is a series of actual images of the AC3 model (the same structure as the green shell, the black handle) shared on this page, not a model-by-type picture; the size of the head size, the size of the models, the size of the shape, the size of the image, the size of the image, the size of the image, the size of the image, the size of the image, the size of the image, the size of the image, the size of the image, the size of the image, the size of the image The torque range and shape differences are determined by reference to the parameter table and the object. The picture is harmonized to 800×800 with a watermark with a thumbnail 480..Screech Screech Screak . Reference: 4
Q: What is the torque range, accuracy and square of AC180N3?
A: Official torque adjustment for AC180N3 to 40 — 180 N·m , 1 tic 2 N·m, Accuracy 3%, 3 ZX Heading 12.7 (1/2"), rated air pressure 0.5MPa
Q: What's the difference between a semi-automatic torque wrench and a normal torque wrench?
A: AC3 with a winding motor on the wrench, one wrench can do two steps - first pre-strength with a fresco motor (pre-squeaking tow 11-15 N·m) Quest And then you can use a manual twister to make the end of the precision tight. Because it is finally hardened by a twister, air pressure fluctuations do not cause a tight twisting deviation, and the performance is much more efficient than the "shock wrench plus wrench". — — — — — — — — — — — — — — — — — — — — —
Q: What does pre-empt torque mean? What happens when you miss?
A: Pre-string torque is the force to be achieved during the pre-strength phase, such as AC180N3 for 15 N·m. The pre-strength phase is insufficient and the screws do not form sufficient pre-strength. The actual grip on the tow trigger is lower when it is finally twisted to set the torque, and there may be a risk of "stretch in place but pretightness is inadequate " ; thus pretight torque and final torque must be used in an official pair. — — — — — — — — — — — — — — — — — — — — —
Q: What's the difference between AC3 and the old AC2?
A: AC2 series was upgraded to AC3 in 2018, month of 2018, and AC2 was discontinued. AC3 is also a high pre-strength. XV, also with a high pre-intensity. The main changes include the torque range specification, application of ISO6789: 2017 (since 2022 year 1) and partial surface size updates. For old paragraphs, please refer to old TOHNICHI information, this page only lists the current AC3. Reference: 5
Q: What about the need for a calculation of errors?
A: Optional ACLS series (ACLS25N3/ACLS50N3/ACLS100N3/ACLS180N3) with a limited-position switch (specify AC/DC 30V 1A below) The combination with the CNA-4mk3 counter (required for purchase) can be called upon when the bolt is leaking. The random scroll line on the LS is about 2m (extension). The model on this page is not listed with LS
Q: Can you use the normal kit?
A: No. Official attention clearly requires that only the aerodynamic cylinders be used. AC3's torque principle requires smooth transmission from the cylinder in the instant of breakup, with the normal cylinders having a shock that affects the torque signal and can damage the thorn wheel
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.