TOHNICHI ACLS50N3 Semi-Automatic Torque Wrench (Model ACLS50N3) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI ACLS50N3 semi-automatic Airtork torque wrench with limit switch, 10-50 N.m, +/-3%, Pokayoke ready with optional CNA-4mk3.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Torque Adjustment Range [N · M] Minimum ~ Maximum | 10~50 |
|---|---|
| 1 Scale [N · M] | 0.5 |
| Metric Model | ACLS500M3 |
| Metric Torque Range [Kgf · Cm] Minimum ~ Maximum | 100~500 |
| Metric 1 Scale [Kgf · Cm] | 5 |
| Imperial Model | ACLS400I3-3/8 |
| Imperial Torque Range | 100~400lbf·in |
| Imperial 1 Scale | 5lbf·in |
| Torque [N · M] | 11 |
| Rotational Speed [r.p.m.] | 950 |
| Applicable Steel | M8 |
| Applicable High Voltage | M6 |
| Maximum Hand Force P[N] | 251.9 |
| Rated Air Pressure [MPa] | 0.5 |
| Air Mass Flow Quantity [m3 / Min] | 0.33 |
| Effective Length L[Mm] | 198.5 |
| Overall Length L'[Mm] | 293 |
| Full Height H[Mm] | 92.8 |
| Wrench Head R[Mm] | 16 |
| Square Drive a[Mm] | 9.53(3/8") |
| Square Drive B[Mm] | 20.9 |
| Square Drive C[Mm] | 10.1 |
| ΦD[mm] | 12 |
| LS E[mm] | 44.5 |
| LS F[mm] | 24 |
| Limit Digit | with (LS with Limit digits Open ) |
| Limit Digit Electric Air Specifications | AC / DC 30V 1A or less |
| Limit Digit Wire Length | Approx. 2m( when, Standard Specifications) |
| Weight [Kg] | 1.7 |
| Accuracy | ±3% |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The TOHNICHI ACLS50N3 is a semi-automatic torque wrench (Airtork) from the ACLS3 series, fitted with a pneumatic motor on the wrench body so that one tool handles the whole cycle from pre-tightening to final tightening. This page covers the LS version with a limit switch: it adds a switch signal output to everything the AC3 version offers, and combined with the optional CNA-4mk3 count alarm it forms a Pokayoke (error-proofing) system that controls both fastening count and torque. Torque adjustment range 10–50 N·m, accuracy ±3%, square drive 9.53 mm (3/8").
The pneumatic motor performs pre-tightening and the manual torque wrench then completes high-accuracy final tightening. Because final tightening is done by the torque wrench, variations in air pressure do not shift the tightening torque. The scale in N·m makes the setting easy to change, and the wrench can be calibrated with a torque wrench tester. For a Pokayoke configuration review, please contact our engineers.
Assembly work and mass production, particularly mixed-model lines, high-variety low-volume production and processes needing count traceability and error interception.
Four capacities are offered: 5–25, 10–50, 20–100 and 40–180 N·m, corresponding one-for-one with the AC3 series without LS, so an existing AC3 selection converts directly to ACLS. The LS version adds the limit switch, about 0.2 kg of weight and the LS E / LS F mounting dimensions; torque and dimensions are otherwise identical. LS E is 44.5 mm and LS F is 24 mm; the switch is rated AC/DC 30V 1A or less with an approximately 2 m coiled cable extended. Related designations include ACLS25N3, ACLS50N3, ACLS100N3 and ACLS180N3; metric model ACLS500M3 covers 100–500 kgf·cm and imperial model ACLS400I3-3/8 covers 100–400 lbf·in. The two imperial suffix groups -3/8 and -1/2 correspond to the two groups of square-drive dimensions in the official table. Other published figures: pre-tightening torque 11 N·m, no-load speed 950 r.p.m., M8 normal steel bolt / M6 high-tension bolt, max hand force 251.9 N, rated air pressure 0.5 MPa, air flow 0.33 m3/min, effective length L 198.5 mm, overall length L' 293 mm, height 92.8 mm, head R 16 mm, square drive a 9.53 mm (3/8"), b 20.9 mm, c 10.1 mm, ΦD 12 mm, weight about 1.7 kg. A cross-check: the official note gives ACLS100N3 an overall length of 333.5 mm, consistent with 334 mm in the table. For finer thread and hex dimensions, refer to the original TOHNICHI drawings and supplied documents.
Q: What is the difference between ACLS and the standard AC3?
A: Torque ranges and dimensions are identical; ACLS adds the limit switch, roughly 0.2 kg and the LS E / LS F mounting dimensions. Choose ACLS for counting and error proofing, otherwise the lower-cost AC3.
Q: What can the limit switch drive?
A: A dry-contact output rated AC/DC 30V 1A or less, suitable for a PLC, count alarm or data acquisition system; TOHNICHI recommends the CNA-4mk3.
Q: Can ordinary sockets be used, and can the tool be calibrated?
A: No — only pneumatic / impact-resistant sockets may be used, because the pneumatic motor's impact accelerates wear on ordinary sockets and the square drive. Calibration is possible with a torque wrench tester; since January 2022 the AC3 / ACLS3 series conforms to ISO6789:2017 with certificates differing from conventional products, and imperial-unit models do not conform to that standard.
Guangzhou Yunke Electronic Co., Ltd. supplies the TOHNICHI AC3 / ACLS3 range with selection advice, quotations, demonstrations, CNA-4mk3 counters, sockets and after-sales support. State "TOHNICHI + model" when ordering, for example ACLS100N3; the CNA-4mk3 is a separate option.
Values above are transcribed from the official TOHNICHI specification tables. TOHNICHI publishes AC3 (without LS) and ACLS3 (with LS) as two separate tables with identical torque and dimensions; rows merged in the original have been mapped to the confirmable correspondence, and no values were inferred. This is a quotation-only catalogue and no prices are listed.
For a quotation, lead time or a Pokayoke configuration proposal, please contact our engineers.