TOHNICHI ACLS180N3 Torque Testers (Model ACLS180N3) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI ACLS180N3 Torque Testers — Torque Testers · Yunke Electronics. Request a quotation and datasheet.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Torque Adjustment Range [N · M] Minimum ~ Maximum | 40~180 |
|---|---|
| 1 Scale [N · M] | 2 |
| Metric Model | ACLS1800M3 |
| Metric Torque Range [Kgf · Cm] Minimum ~ Maximum | 400~1800 |
| Metric 1 Scale [Kgf · Cm] | 20 |
| Imperial Model | ACLS130F3-1/2 |
| Imperial Torque Range | 30~130lbf·ft |
| Imperial 1 Scale | 2lbf·ft |
| Torque [N · M] | 15 |
| Rotational Speed [r.p.m.] | 800 |
| Applicable Steel | M12 |
| Applicable High Voltage | M10 |
| Maximum Hand Force P[N] | 450 |
| Rated Air Pressure [MPa] | 0.5 |
| Air Mass Flow Quantity [m3 / Min] | 0.22 |
| Effective Length L[Mm] | 400 |
| Overall Length L'[Mm] | 488 |
| Full Height H[Mm] | 124.5 |
| Wrench Head R[Mm] | 20.5 |
| Square Drive a[Mm] | 12.7(1/2") |
| Square Drive B[Mm] | 26.4 |
| Square Drive C[Mm] | 12.2 |
| ΦD[mm] | 16 |
| LS E[mm] | 174.5 |
| LS F[mm] | 25 |
| Limit Digit | with (LS with Limit digits Open ) |
| Limit Digit Electric Air Specifications | AC / DC 30V 1A or less |
| Limit Digit Wire Length | Approx. 2m( when, Standard Specifications) |
| Weight [Kg] | 3.5 |
| Accuracy | ±3% |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
ACLS180N3 is a TOHNICHI production (TOHNICHI)ACLS3 Series Semi-automatic wrench (Airtork)ScreaksScretsScresThe torque handle has a motor, and with a wrench, the whole process from pre-stuff to final hardenLS with Limited Location Switchwith the addition of a restricted-site switch signal output, which, in addition to having all the features of AC3, can be combined with a CNA-4mk3 Count alarm (subject to purchase) to form the Error-Responsive (Palement) system, Double control of hard quantities and torque. Torque adjusts the range 40 — 180 N·m, accuracy 3%, header 12.7 (1/2). 2". torquessss torques of the torque tor tor
Applicable to assembly and bulk production.!
The semi-automatic wrench (Airtork) AC 3 series can use shock wrench “shock-proof kit”. Work efficiency is improved by the reduced vibrations during rotation
The A3 series is a high pre-strength
The routine two-step tightening of the shock wrench plus the wrench can be performed with a wrench, which has greatly improved operational efficiency
Pre-fixing operations are performed using aerodynamic motors, followed by high precision tightening operations using manual toggle wrench.S
The tight toque caused by air pressure changes did not deviate as the tortuous wrench was used to eventually tighten
The N.m. unit scale simply changes the tight torque
Calibration can be done with a torque wrench
ELS with a restricted switch. Combination with CNA-4MK (required) to construct the bugproof (Palem) system._. Reference: 3
The AC3/ ACLS 3 series has been in compliance with ISO6789: 2017 since 2022 year , except for some products.Strate , X, X, XZ XVX XV XVX Q series, XZ X X. Reference: 1
Description of parameter calibreSpecifications: TOHNICHI b/c ACLS3 ACLS100N3 0.2kg 333.5mm 3 25 50 334 2 100 180 8 1 LS ACLS. Please contact our engineers for the full technical wording. Reference values: 3, 25, 50, 2.
①First, you have to press the torque to select the slotThis page 4 file covers 5 25 , 10 50 , 20 100 , : XQZ , 40-180 N·m, which corresponds to the AC3 series without narcotypes, which match the size specifications, This allows for the direct replacement of the ACLS model with the current AC3 selection..ScretssScretsS
②How do you use the power switch?The size of the LS E/ LS F limited switch on the machine, which can be verified when the space is installed. The electrical specifications of the restricted switches are AC/DC 30V 1A with a scroll length of approximately 2m (at stretching)
③Errorproofing (Pame) systemAccessing the restricted switch signal to the CNA-4mk3 counter alarm (required), which can be added to the number of the bolts that are firmly secured, The three wrong types of on-site interception are "one less/ one more/ torque not in place". for multiple small batches, mixed line production and audit retrospective scenes
④Thread limit.%1%2%Officially clearCharAerodynamic cylinders onlyThe normal hand-held cylinders are not available, otherwise the impact of the air-motivated motor will accelerate the wear and tear of the cylinder and the side
⑤Calibrationcalibration with a torque wrench. From the year 2022 1, the AC3/ACLS3 series has been in line with ISO6789:2017, with calibration certificates different from traditional products; The U.S.-made unit did not meet the requirements of ISO6789: 2017
Please specify the "TOHNICHI+" type when ordering, for exampleTOHNICHI ACLS100N3This page does not contain official pricing. Please contact Guangzhou Yunke Electronics Co., Ltd. if you need an offer. Reference: CNA-4mk3
Q: What is the difference between ACLS and the normal AC3 model?
A: The torque is identical to the size specification, ACLS extra banded switch, weight added by strategize about 0.2kg, and two additional installed position sizes for LS E/LS F. ACLS is selected when counting and error-proofing is required, or AC3 is selected for lower prices
Q: What devices can a restricted switch take?Aw
A: The restricted switch is a dry point signal output with a specification of AC/DC 30V 1A below, with direct access to PLC, Count alarm or data collection system. Officially recommended for use in conjunction with CNA-4mk3
Q: Can you use the normal kit?. Reference: ACLS
A: No. Official signs can only be made with aerodynamic cylinders. The impact of a gas-moved motor accelerates the wear and tear of the normal cylinders and the side.?A/C.A.A.A.A.A
Q: Why is it important to pre-empt the torque?!!?
A: The machine is a high pre-fixed type, and the air motor first puts pre-hard toggles in place, then the manual tow wrench is used to complete the bolt._ The first of these is the "speech-to-tangle" and "squeak-to-tack" error.!
Q: Can you measure calibration?
A: Yes, calibrated with a torque wrench. From 2022 year 1, the AC3/ACLS3 series corresponds to ISO6789:2017, which is different from traditional products; U.S.-made unit products do not meet this standard.!
Q: How do you choose from the same series without the LS model?!
A: AC3 is sufficient if only single hardened or simple, without counting retroactiveity; ACLS is selected and matched with CNA-4mk3 if mixed line production, multi-species switching or error-resistant retroactive.A: A/C / / A: AC / if there is a mix of line production, multi-species switching or needing to be protected from error-retroactivity
Reference values from the original datasheet: 3, 3, 3, 3, 3, 3.
All model codes, numbers and units are preserved verbatim from the original manufacturer datasheet. An English datasheet is available on request.
For a quotation, lead time or an optional calibration certificate, please contact our engineers.