TOHNICHI CEM200N3X19D-G Digital Torque Wrench (Model CEM200N3X19D-G) is a Torque Testers supplied by Guangzhou Yunke Electronics Co., Ltd. TOHNICHI CEM200N3X19D-G DATA TORK digital interchangeable-head torque wrench, 40-200 N.m, +/-1%, dual display, 999-data memory.
Brand: TOHNICHI | Category: Torque Testers
Sales Inquiries: 15626018696 · 78403603@qq.com

| Torque Range [N · M] Minimum ~ Maximum | 40~200 |
|---|---|
| 1 Digits [N · M] | 0.2 |
| Torque Range [Kgf · Cm] Minimum ~ Maximum | 400~2000 |
| 1 Digits [Kgf · Cm] | 2 |
| Torque Range [Kgf · M] Minimum ~ Maximum | 4~20 |
| 1 Digits [Kgf · M] | 0.02 |
| Torque Range [Lbf · in] Minimum ~ Maximum | 360~1700 |
| 1 Digits [Lbf · in] | 2 |
| Torque Range [Lbf · Ft] Minimum ~ Maximum | 30~150 |
| 1 Digits [Lbf · Ft] | 0.2 |
| Maximum Hand Force [N] | 428.3 |
| Effective Length L[Mm] | 467 |
| Overall Length L'[Mm] | 475 |
| Wrench Head d3[Mm] | 19 |
| Interchangeable Head Optional Model | (SH、RH、QH、RQH、DH、HH)19D |
| Weight [kg] | 0.78 |
| Accuracy | ±1% |
| Display | 7 Range LED 410mm; 14 Range LCD 67mm; 7 Range LED 43mm |
| Battery Life Indication Lamp | 4 levels |
| Judgment LED Lamp | See the original manufacturer datasheet |
| Memory Quantity | 999 records (M-2 Mode: 99 records Data) |
| Communication Functions | RS232C(2400~19200 bps) |
| Data output | USB Connection Head to Output |
| Power Supply | NiMH Rechargeable Battery |
| Continuous operating time | Fully charged Approx. 20 hours (Charging 1 hours can Operating 8 hours) |
| Charging time | Approx. 3.5 hours |
| Operating Temperature Range [°C] | 0~40 non-condensing |
| Basic Functions | Peak Hold; with Day and Time Peak Data Storage Device; Auto Store / digits; Buzzer; Judgment Measurement Data; Auto Zero Setting; Auto Power-off (3 minutes); when |
Some specification lines are quoted from the original manufacturer datasheet. Numbers, units and model codes are preserved verbatim; an English datasheet is available on request.
The TOHNICHI CEM200N3X19D-G is a digital interchangeable-head torque wrench (DATA TORK) from the CEM3 series. A digital display unit is built into the wrench body, so a single tool performs both inspection of a screw during tightening and final tightening, showing the torque value and the pass / fail result together. This page covers the CE-marked international version (-G), with a torque range of 40–200 N·m, ±1% accuracy and a 19 mm head width across flats.
CEM3 uses an interchangeable-head design: one body accepts different square-drive heads to suit various bolt sizes. TOHNICHI describes its head range as the widest available, which makes it practical to standardise one digital body across several stations. For help matching a head to your bolt, please contact our engineers.
Inspection and tightening of threaded fasteners, particularly where measured values must be stored, judged and traced rather than simply read from a scale.
The CEM3 series spans eight capacities from 2–10 up to 170–850 N·m. Choose a body that puts normal working torque near the middle of the range for better display resolution and judgement reliability, then choose the interchangeable head to match the bolt. On this CEM200N3X19D-G the head width is 19 mm and available head types are (SH, RH, QH, RQH, DH, HH) 19D. Heads are wear parts: inspect and replace them according to use frequency, and consult TOHNICHI's head-root dimension data for exact root sizes. Equivalent ranges on this model: 400–2000 kgf·cm (2 kgf·cm), 4–20 kgf·m (0.02 kgf·m), 360–1700 lbf·in (2 lbf·in) and 30–150 lbf·ft (0.2 lbf·ft); resolution 0.2 N·m, max hand force 428.3 N, effective length L 467 mm, overall length L' 475 mm, weight 0.78 kg. The official datasheet gives no kgf·cm / lbf·in ranges or digits for CEM850N3X32D-G (four rows shown as "-"), so those rows are left blank here; refer to the original TOHNICHI catalogue for those conversions.
The display comprises a 7-segment 4-line 10 mm LED, a 14-segment 6-line 7 mm LCD and a 7-segment 4-line 3 mm LED, with a four-step battery-life indicator and red / blue judgement LEDs. Peak hold and a date-and-time-stamped peak data memory hold 999 readings (99 in M-2 mode), with automatic store / reset and auto power-off after 3 minutes. RS232C (2400–19200 bps) and USB serial output are standard; DtRcv (Data Receiver) imports readings into Excel. Power is a Ni-MH rechargeable pack: about 20 hours on a full charge, 8 hours of use from a 1-hour charge, about 3.5 hours to full charge. Operating temperature 0–40℃ without condensation. Basic functions include peak hold, date / time peak memory, auto store / reset, tightening-complete buzzer, data judgement, auto zero, 3-minute auto power-off and a clock.
Q: How does CEM3 compare with a conventional mechanical torque wrench?
A: A mechanical wrench is read from a scale and judged by feel. CEM3 displays the value directly, gives a red / blue LED judgement, stores peak data and exports over USB / RS232C. Choose CEM3 for statistics, traceability or multi-operator lines; a mechanical wrench is more economical for one-off work without data needs.
Q: What does interchangeable head mean, and how often should heads be replaced?
A: The digital body stays the same while heads with different drives are swapped to match the bolt, avoiding a complete wrench per size. TOHNICHI gives no fixed replacement interval; set an inspection cycle based on use frequency and torque range, and check the head first if judgements become erratic or readings drift.
Q: Can it measure angle, and how is data exported?
A: Torque and angle are displayed together, with data judgement and a completion buzzer; DtRcv (Data Receiver) imports the values into Excel. Standard outputs are RS232C (2400–19200 bps) and USB serial. The software was called ExRcv until March 2021.
Q: What is the accuracy and what accessories ship with it?
A: Accuracy is ±1% across the series; CEM50N3X12D through CEM850N3X32D can be ordered with 1% uncertainty and a JCSS calibration certificate. Standard accessories are battery pack BP-5, an adapter for QH heads and charger BC-3-G. TOHNICHI recommends TF, DOTE4 / DOTE4-G, DOTE4-MD2 / DOTE4-G-MD2 and TCC2 / TCC2-G testers and calibrators. State "TOHNICHI + model" when ordering, for example CEM100N3X15D.
Guangzhou Yunke Electronic Co., Ltd. supplies the TOHNICHI CEM3 range with selection advice, quotations, demonstrations, interchangeable heads, calibration certificate options and after-sales support.
Values above are taken cell by cell from the official TOHNICHI Chinese specification table (an Excel-merged-cell HTML table, restored by column index), with no inferred values; the N·m range is the official primary parameter and the metric / imperial figures are conversions given in the same table. This is a quotation-only catalogue and no prices are listed.
For a quotation, lead time or a head-selection proposal, please contact our engineers.